3.3 V、20 Mbps RS485/RS422收发器

ADLT2852S-CSL是一款低功耗、20 Mbps RS485/RS422收发器，采用3.3 V电源供电。该接收器具有故障保护特性，在浮动或短路输入条件下保证高输出状态。\n\n 当禁用或移除电源时，驱动器在整个共模范围内保持高输出阻抗。所有输出限流和热关断可防止总线竞争或故障导致功耗过大。增强静电放电(ESD)保护使该器件可承受收发器接口引脚上高达±15 kV的人体模型(HBM)放电，而不会发生闩锁或损坏。\n\n ADLT2852S-CSL的额定温度范围为-55°C至+125°C。如需了解更多应用和技术信息，请参阅商业太空产品计划 手册和 LTC2852 数据手册。 • 3.3 V 电源电压\n• 20 Mbps 最大数据速率\n• 不会对高达 ±15 kV 的 HBM 造成损坏或闩锁\n• 在完整共模范围内有保证的故障安全接收器操作\n• 限流驱动器和热关断\n• 上电和掉电无毛刺驱动器输出\n• 低工作电流：接收模式下为 370 μA（典型值）\n• 与 TIA/EIA-485-A 规格兼容\n• 采用 14 引脚 SOIC_N 封装;

3.3 V, 20 Mbps RS485/RS422 Transceiver

GENERAL DESCRIPTION The ADLT2852S-CSL is a low power, 20 Mbps RS485/RS422 transceiver operating on a 3.3 V supply. The receiver has a fail-safe feature that guarantees a high output state under conditions of floating or shorted inputs. The driver maintains a high output impedance over the ent

Surface Mount Microwave Schottky Detector Diodes

Description/Applications These Schottky diodes are specifically designed for both analog and digital applications. This series offers a wide range of specifications and package configurations to give the designer wide flexibility. Typical applications of these Schottky diodes are mixing, detectin

Surface Mount Zero Bias Schottky Detector Diodes

文件：108 Kbytes Page：13 Pages

Surface Mount Zero Bias Schottky Detector Diodes

文件：108 Kbytes Page：13 Pages

2A 500/1500kHz SIMPLE SYNCHRONOUS Buck Regulator

文件：618.41 Kbytes Page：13 Pages

High Power-Factor Preregulator

文件：210.63 Kbytes Page：6 Pages