高IP3、700MHz至2800 MHz双平衡无源混频器、IF放大器和宽带LO放大器

ADL5811利用革命性的新型宽带方波限幅本振(LO)放大器来实现前所未有的700 MHz至2800 MHz射频(RF)带宽。与传统的窄带正弦波LO放大器解决方案不同，这款解决方案允许将高于或低于RF输入的LO应用于极宽的带宽。由于不需要储能元件，因此直流功耗也随着LO频率降低而降低。\n\n ADL5811利用高线性度的双重平衡无源混频器内核以及集成式RF和LO平衡电路实现单端操作。它内置可编程RF巴伦，能够在700 MHz至2800 MHz RF输入频率范围内实现较佳性能。平衡无源混频器配置能够在整个RF带宽内提供出色的LO至RF和LO至IF泄漏、出色的RF至IF隔离以及出色的交 • RF 频率范围：700 MHz至2800 MHz（连续）\n• LO频率范围：250 MHz至2800 MHz，高端或低端注入 \n• IF频率范围：30 MHz至450 MHz\n• 功率转换增益：7.5 dB(1900 MHz)\n• 单边带(SSB)噪声系数：10.7 dB (1900 MHz)\n• 输入IP3：27.5 dBm (1900 MHz)\n• 输入P1dB：12.7 dBm (1900 MHz)\n• LO驱动：0 dBm（典型值）\n• 单端50 Ω RF端口\n• 单端或平衡LO输入端口\n• 单电源供电：3.6 V至5.0 V\n• 串行端口接口控制所有功能 \;

High IP3, 700 MHz to 2800 MHz, Double Balanced, Passive Mixer, IF Amplifier, and Wideband LO Amplifier

文件：672.48 Kbytes Page：28 Pages

High IP3, 700 MHz to 2800 MHz, Double Balanced, Passive Mixer, IF Amplifier, and Wideband LO Amplifier

文件：672.48 Kbytes Page：28 Pages

封装/外壳：32-WFQFN 裸露焊盘，CSP 包装：卷带（TR） 描述：IC MXR 700MHZ-2.8GHZ AMP 32LFCSP RF/IF，射频/中频和 RFID 射频混频器

High IP3, 700 MHz to 2800 MHz, Double Balanced, Passive Mixer, IF Amplifier, and Wideband LO Amplifier

文件：672.48 Kbytes Page：28 Pages

10-Bit, Low-Power, 2-Wire Interface, Serial, Voltage-Output DAC

General Description The MAX5811 is a single, 10-bit voltage-output digital-to-analog converter (DAC) with an I2C™-compatible 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply and draws only 100µA at VDD = 3.6V. A low-power powerdown

10-Bit, Low-Power, 2-Wire Interface, Serial, Voltage-Output DAC

General Description The MAX5811 is a single, 10-bit voltage-output digital-to-analog converter (DAC) with an I2C™-compatible 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply and draws only 100µA at VDD = 3.6V. A low-power powerdown

10-Bit, Low-Power, 2-Wire Interface, Serial, Voltage-Output DAC

General Description The MAX5811 is a single, 10-bit voltage-output digital-to-analog converter (DAC) with an I2C™-compatible 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply and draws only 100µA at VDD = 3.6V. A low-power powerdown

BiMOS II 12-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS

Designed primarily for use with vacuum-fluorescent displays, the UCN5811A smart power BiMOS II driver features low-output saturation voltages and high output switching speed. These devices contain CMOS shift registers, data latches, and control circuitry, and bipolar high-speed sourcing outputs wi

BiMOS II 12-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS

Designed primarily for use with vacuum-fluorescent displays, the UCN5811A smart power BiMOS II driver features low-output saturation voltages and high output switching speed. These devices contain CMOS shift registers, data latches, and control circuitry, and bipolar high-speed sourcing outputs wi