1 MHz to 4 GHz, 80 dB Logarithmic Detector/Controller

GENERAL DESCRIPTION The ADL5513 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output. It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detecto

1 MHz to 4 GHz, 80 dB Logarithmic Detector/Controller

FEATURES ► Wide bandwidth: 1 MHz to 4 GHz ► 80 dB dynamic range (±3 dB) ► Constant dynamic range over frequency ► Stability over −40°C to +85°C temperature range: ±0.5 dB ► Operating temperature range: −40°C to +125°C ► Sensitivity: −70 dBm ► Low noise measurement/controller output (VOUT)

包装：散装 描述：BOARD EVAL FOR ADL5513 开发板，套件，编程器 射频评估和开发套件，开发板

1 MHz to 4 GHz, 80 dB Logarithmic Detector/Controller

文件：1.2988 Mbytes Page：28 Pages

Logarithmic Detector/Controller

文件：1.32272 Mbytes Page：25 Pages

CMOS-CCD 1H Delay Line for NTSC

Description The CXL5513M/P are CMOS-CCD delay line ICs designed for processing video signals. This ICs provide a 1 H delay time for NTSC chroma signals including the external lowpass filter. Features • Single 5 V power supply • Low power consumption • Built-in peripheral circuit • Built-in t

CMOS-CCD 1H Delay Line for NTSC

Description The CXL5513M/P are CMOS-CCD delay line ICs designed for processing video signals. This ICs provide a 1 H delay time for NTSC chroma signals including the external lowpass filter. Features • Single 5 V power supply • Low power consumption • Built-in peripheral circuit • Built-in t

TR909 DLC/FLC SLIC with Low Power Standby

The HC5513 is a subscriber line interface circuit which is interchangeable with Ericsson’s PBL3764 for distributed central office applications. Enhancements include immunity to circuit latch-up during hot plug and absence of false signaling in the presence of longitudinal currents. Features •

Silicon Controlled Rectifier (SCR) 5 Amp

Description: The NTE5511 thru NTE5513 all–diffused, three junction, silicon controlled rectifiers (SCR’s) are intended for use in power–control and power–switching applications. These devices are available in a TO66 type package and have a blocking voltage capability of up to 600V and a forward c

SURFACE MOUNT SILICON ZENER DIODES

VZ : 3.9 - 200 Volts PD : 3 Watts FEATURES : * Complete Voltage Range 3.9 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free