1200 MHz to 2500 MHz, Dual-Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun

GENERAL DESCRIPTION The ADL5356 uses a highly linear, doubly balanced, passive mixer core along with integrated RF and local oscillator (LO) balancing circuitry to allow single-ended operation. The ADL5356 incorporates the RF baluns, allowing for optimal performance over a 1200 MHz to 2500 MHz RF

2300 MHz to 2900 MHz Balanced Mixer

GENERAL DESCRIPTION The ADL5363uses a highly linear, doubly balanced passive mixer core along with integrated RF and local oscillator (LO) balancing circuitry to allow for single-ended operation. FEATURES RF frequency range of 2300 MHz to 2900 MHz IF frequency range of dc to 450 MHz

1200 MHz至2500 MHz双平衡混频器，内置LO缓冲器、IF放大器和RF巴伦

ADL5356利用高线性度双平衡无源混频器内核以及集成的RF和本振(LO)平衡电路来实现单端工作。该器件内置RF巴伦，能够在1200 MHz至2500 MHz RF输入频率范围内实现较佳性能。对于1700 MHz至2500 MHz的RF频率，该器件使用低端LO进行性能优化；对于1200 MHz至1700 MHz的RF频率，该器件使用高端LO进行性能优化。平衡无源混频器配置可提供良好的LO至RF泄漏（典型值优于-35 dBm）以及出色的交调性能。平衡混频器内核还能提供极高的输入线性度，使该器件能用在要求苛刻的蜂窝应用中。对于这些应用，如果输入线性度不高，带内阻塞信号可能会导致动态性能下降。无源混 • RF频率范围：1200 MHz至2500 MHz\n• IF频率范围：30 MHz至450 MHz\n• 功率转换增益：8.2 dB\n• SSB噪声系数：9.9 dB\n• SSB噪声系数（含5 dBm阻波器）：21 dB\n• 输入IP3：31 dBm\n• 输入P1dB：11 dBm \n• LO驱动：0 dBm（典型值） \n• 单端50Ω RF与本振输入端口\n• 高隔离度SPDT LO输入开关\n• 单电源电压: 3.3～5 V \n• 6 mm × 6 mm，36引脚裸露焊盘LFCSP封装;

300 MHz to 1100 MHz Balanced Mixer, LO Buffer, and RF Balun

文件：486.21 Kbytes Page：23 Pages

High Performance, Dual Channel IF Sampling Receiver

文件：198.24 Kbytes Page：4 Pages

2200 MHz to 2700 MHz, Dual-Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun

文件：438.3 Kbytes Page：24 Pages

1200 MHz to 2500 MHz, Dual-Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun

GENERAL DESCRIPTION The ADL5356 uses a highly linear, doubly balanced, passive mixer core along with integrated RF and local oscillator (LO) balancing circuitry to allow single-ended operation. The ADL5356 incorporates the RF baluns, allowing for optimal performance over a 1200 MHz to 2500 MHz RF

1200 MHz to 2500 MHz, Dual-Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun

GENERAL DESCRIPTION The ADL5356 uses a highly linear, doubly balanced, passive mixer core along with integrated RF and local oscillator (LO) balancing circuitry to allow single-ended operation. The ADL5356 incorporates the RF baluns, allowing for optimal performance over a 1200 MHz to 2500 MHz RF

1200 MHz to 2500 MHz, Dual-Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun

GENERAL DESCRIPTION The ADL5356 uses a highly linear, doubly balanced, passive mixer core along with integrated RF and local oscillator (LO) balancing circuitry to allow single-ended operation. The ADL5356 incorporates the RF baluns, allowing for optimal performance over a 1200 MHz to 2500 MHz RF

封装/外壳：36-VFQFN 裸露焊盘，CSP 包装：托盘 描述：IC MIXER 1.2-2.5GHZ 36LFCSP RF/IF，射频/中频和 RFID 射频混频器

包装：散装 描述：EVAL BOARD FOR ADL5356 开发板，套件，编程器 射频评估和开发套件，开发板

ZENER DIODE CHIPS

• ZENER DIODE CHIPS • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • ELECTRICALLY EQUIVALENT TO 1N5333B THRU 1N5379B • 5 WATT CAPABILITY WITH PROPER HEAT SINKING • COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES, WITH THE EXCEPTION OF SOLDER REFLOW

HIGH POWER ZENER DIODE 6.8 VOLTS THRU 200 VOLTS 5.0W, 5 TOLERANCE

DESCRIPTION: The CENTRAL SEMICONDUCTOR CMZ5334B series silicon Zener diodes are voltage regulators, manufactured in an epoxy molded surface mount package, and designed for use in industrial, commercial, entertainment and computer applications. MARKING: SEE MARKING CODE ON ELECTRICAL CHARACTERIST

5 Watt Surface Mount Silicon Zener Diodes

Features • Low profile package for surface mounting (flat handling surface for accurate placement) • Zener Voltage 3.3V to 200V • High Surge Current Capability • For available tolerances - see note 1 • Available on Tape and Reel (see EIA std RS-481)

5 Watt Surface Mount Silicon Zener Diodes

Features • Low profile package for surface mounting (flat handling surface for accurate placement) • Zener Voltage 3.3V to 200V • High Surge Current Capability • For available tolerances - see note 1 • Available on Tape and Reel (see EIA std RS-481)

Silicon 5.0 Watt Zener Diodes

Features ● Surface Mount Application ● 11 thru 200 Volt Voltage Range ● Built-in strain relief ● Glass passivated junction ● Low induct Mechanical Data ● Case: JEDEC DO-214AB Molded plastic over passivated junction ● Terminals solderable per MIL-STD-750, Method 2026 ● Standard Packaging: