2.3 GHz to 4.0 GHz RF Driver Amplifier

GENERAL DESCRIPTION The ADL5321 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performance

2.3 GHz to 4.0 GHz RF Driver Amplifier

文件：445 Kbytes Page：16 Pages

RF Driver Amplifier

文件：427.54 Kbytes Page：16 Pages

2.3 GHz 至4.0 GHz ¼ W RF驱动器放大器

2.3 GHz to 4.0 GHz RF Driver Amplifier

GENERAL DESCRIPTION The ADL5321 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performance

2.3 GHz to 4.0 GHz RF Driver Amplifier

文件：445 Kbytes Page：16 Pages

RF Driver Amplifier

文件：427.54 Kbytes Page：16 Pages

2.3 GHz to 4.0 GHz 쩌 Watt RF Driver Amplifier

文件：570.81 Kbytes Page：16 Pages

2.3 GHz to 4.0 GHz RF Driver Amplifier

文件：445 Kbytes Page：16 Pages

RF Driver Amplifier

文件：427.54 Kbytes Page：16 Pages

2.3 GHz to 4.0 GHz 쩌 Watt RF Driver Amplifier

文件：570.81 Kbytes Page：16 Pages

RF Driver Amplifier

文件：427.54 Kbytes Page：16 Pages

2.3 GHz to 4.0 GHz 쩌 Watt RF Driver Amplifier

文件：570.81 Kbytes Page：16 Pages

2.3 GHz to 4.0 GHz RF Driver Amplifier

文件：445 Kbytes Page：16 Pages

包装：散装 描述：EVAL BOARD FOR ADL5321 开发板，套件，编程器 射频评估和开发套件，开发板

封装/外壳：TO-243AA 包装：散装 描述：IC AMP CELL 2.3GHZ-4GHZ SOT89-3 RF/IF，射频/中频和 RFID 射频放大器

2.5 V to 5.5 V, 115 uA, Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5330/AD5331/AD5340/AD53411 are single 8-/10-/12- bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 115 μA at 3 V and feature a power-down mode that further reduces the current to 80 nA. The devices incorporate an on-chip output buffer that can drive the

2.5 V to 5.5 V, 230uA, Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5332/AD5333/AD5342/AD5343 are dual 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 230 µA at 3 V, and feature a power-down pin, PD that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can dr

2.5 V to 5.5 V, 120 uA, 2-Wire Interface, Voltage Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5301/AD5311/AD5321 are single 8-bit, 10-bit, and 12-bit buffered voltage-output DACs that operate from a single 2.5 V to 5.5 V supply, consuming 120 µA at 3 V. The on-chip output amplifier allows rail-to-rail output swing with a slew rate of 0.7 V/µs. It uses a 2-wire (I

20 (7/28) AWG Tinned Copper

文件：411.7 Kbytes Page：4 Pages

DynaForceTM 120 and 160 Amp Alternators

文件：1.14574 Mbytes Page：4 Pages