2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

Multiplexing the CS556x/7x/8x Delta-Sigma ADCs

1. INTRODUCTION The CS556x/7x/8x devices represent a new generation of delta-sigma analog-to-digital converters that compete with SAR (successive approximation register) converters, with some distinct advantages. The unique features of these over-sampling converters allow them to be multiplexed

2.5 Ω、CMOS、低功耗、双通道2:1多路复用/解复用USB 1.1开关

ADG787是一款低压CMOS器件，内置两个独立可选的单刀双掷(SPDT)开关。它主要用作通用模拟/数字开关，也可以用于路由USB 1.1信号。\n\n 该器件导通电阻较低，典型值为2.5 Ω，因此非常适合要求低开关失真的应用。\n\n ADG787提供小型3 × 4凸点、1.50 mm × 2.00 mm WLCSP、小型10引脚LFCSP以及10引脚MSOP三种封装，因而非常适合空间受限的应用。\n\n 接通时，各开关在两个方向的导电性能相同，输入信号范围可扩展至电源电压范围。 ADG787为先开后合式开关。 • 兼容USB 1.1信号开关\n\n• −3 dB带宽：150 MHz\n\n• 小型10引脚LFCSP、WLCSP、MSOP封装;

Tape and Reel Packaging

文件：395.36 Kbytes Page：6 Pages

Tape and Reel Packaging

文件：395.36 Kbytes Page：6 Pages

2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

2.5 OHM CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch

GENERAL DESCRIPTION The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals. This device offers low on resistance of typica

Dual 2:1 Mux/Demux USB 1.1 Switch

文件：421.03 Kbytes Page：16 Pages

Evaluating the ADT7320/ADT7420 Temperature Sensors

文件：760.51 Kbytes Page：16 Pages

Complementary Plastic Silicon Power Transistors

BD787 -> NPN BD788 -> PNP 4 AMPERE POWER TRANSISTORS COMPLEMENTARY SILICON 60 VOLTS 15 WATTS . . . designedfor lower power audio amplifier and lowcurrent, high–speed switching applications. • Low Collector–Emitter Sustaining Voltage VCEO(sus)60 Vdc (Min) — BD787, BD78

POWER TRANSISTORS COMPLEMENTARY SILICON

Complementary Plastic Silicon Power Transistors These devices are designed for lower power audio amplifier and low current, high−speed switching applications. Features • Low Collector−Emitter Sustaining Voltage − VCEO(sus)60 Vdc (Min) • High Current−Gain − Bandwidth Product fT=

CATV amplifier module

DESCRIPTION Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V (DC) in a SOT115J package. The module consists of two cascaded stages both in cascode configuration. FEATURES • Excellent linearity • Extremely low noise • High gain • Excellent return loss propertie

5V/3.3V/3V 5A Step-Down, PWM, Switch-Mode DC-DC Regulators

General Description The MAX787/MAX788/MAX789 are monolithic, bipolar, pulse-width modulation (PWM), switch-mode, step-down DC-DC regulators. Each is rated at 5A. Very few external components are needed for standard operation because the power switch, oscillator, feedback, and control circuitry ar

Integrated Circuit AM Receiver Subsystem

Description: The NTE787, a monolithic integrated circuit, is an AM subsystem that provides the converter, IF amplifier, detector, and audio preamplifier stages for an AM receiver. It also provides internal AGC for the first IF amplifier stage, delayed AGC for an optional external RF amplifier, a