2 ohm CMOS -5 V/5 V, SPST SWITCHES

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

2 Ω、CMOS、±5 V/+5 V单刀单掷开关

ADG601/ADG602均为单芯片CMOS单刀单掷(SPST)开关，导通电阻典型值小于2.5 Ω。低导通电阻平坦度使ADG601/ADG602适合许多应用，尤其是要求低失真的应用。这些开关比机械继电器更可靠，功耗更低，封装尺寸更小，因此是机械继电器的理想替代产品。 \n\n ADG601为常开(NO)开关，ADG602为常闭(NC)开关。接通时，各开关在两个方向的导电性能相同，输入信号范围可扩展至供电轨电压范围。 \n\n 这些开关提供6引脚小型SOT-23封装、8引脚MSOP封装以及820 μm × 2255 μm裸片。 \n\n 产品聚焦低导通电阻：2Ω（典 • 低导通电阻：2.5Ω（最大值） \n\n• 导通电阻平坦度：<0.65 Ω \n\n• ±2.7 V至±5.5 V双电源或+2.7 V至+5.5 V单电源;

2 ohm CMOS -5 V/5 V, SPST SWITCHES

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

2 ohm CMOS -5 V/5 V, SPST SWITCHES

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

SPST Switches

文件：327.35 Kbytes Page：12 Pages

DPAK SURFACE MOUNT SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 6.0 Amperes)

VOLTAGE 200 to 600 Volts CURRENT 6.0 Amperes FEATURES • Superfast recovery times-epitaxial construction. • Low forward voltage, high current capability. • Exceeds environmental standards of MIL-S-19500/228. • Hermetically sealed. • Low leakage. • High surge capability. • Plastic package ha

SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 6.0 Amperes)

SUPER FAST RECOVERY RECTIFIER VOLTAGE - 200 to 600 Volts CURRENT - 6.0 Amperes FEATURES • For thorough hole applications • Low profile package • Built-in strain relief • Easy pick and place • Superfast recovery times for high efficiency • Plastic package has Underwriters

Double-balanced mixer and oscillator

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound ● Void-free Plastic in P600 package ● 6.0 ampere operation at TA=55 ¢J with no thermal runaway ● Ex

GLASS PASSIVATED JUNCTION ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE 50 to 800 Volts CURRENT 6.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switching for high efficiency. • Bot