2 ohm CMOS -5 V/5 V, SPST SWITCHES

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

2 Ω、CMOS、±5 V/+5 V单刀单掷开关

ADG601/ADG602均为单芯片CMOS单刀单掷(SPST)开关，导通电阻典型值小于2.5 Ω。低导通电阻平坦度使ADG601/ADG602适合许多应用，尤其是要求低失真的应用。这些开关比机械继电器更可靠，功耗更低，封装尺寸更小，因此是机械继电器的理想替代产品。 \n\n ADG601为常开(NO)开关，ADG602为常闭(NC)开关。接通时，各开关在两个方向的导电性能相同，输入信号范围可扩展至供电轨电压范围。 \n\n 这些开关提供6引脚小型SOT-23封装、8引脚MSOP封装以及820 μm × 2255 μm裸片。 \n\n 产品特色低导通电阻：2Ω（ • 低导通电阻：2.5Ω（最大值）\n\n• 导通电阻平坦度：<0.65 Ω \n\n• ±2.7 V至±5.5 V双电源或+2.7 V至+5.5 V单电源;

2 ohm CMOS -5 V/5 V, SPST SWITCHES

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

2 ohm CMOS -5 V/5 V, SPST SWITCHES

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

Low on resistance, 2.5 OHM maximum

GENERAL DESCRIPTION The ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on-resistance flatness makes the ADG601/ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches

SPST Switches

文件：327.35 Kbytes Page：12 Pages

VOLTAGE 50 to 1000 Volts CURRENT - P.C. MTG 3A , HEAT-SINK MTG 6A

VOLTAGE 50 to 1000 Volts CURRENT - P.C. MTG 3A , HEAT-SINK MTG 6A FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. • Surge Overload Ratings to 125 Amperes. • Low forward voltage, and reverse leakage. • Small size , simple installation.

Silicon Varistor Temperature Compensating Diode

Features: ● High reliability planar chip and glass sealing ● Low IR ● Large PD

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound ● Glass passivated junction in P600 package ● 6 ampere operation at TA=60 ¢J with no thermal runaway ● Exce

FAST SWITCHING RECOVERY RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

FEATURES ● Low cost ● Diffused junction ● Low forward voltage drop ● High current capability Fast switching for high efficiency ● The plastic meterial carries U/L recognition 94V-O ● Exceeds environmental standards of MIL-S-19500/228

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound ● Void-free Plastic in P600 package ● 6.0 ampere operation at TA=55 ¢J with no thermal runaway ● Ex