Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators

GENERAL DESCRIPTION The ADCMP600, ADCMP601, and ADCMP602 are very fast comparators fabricated on XFCB2, an Analog Devices, Inc. proprietary process. These comparators are exceptionally versatile and easy to use. Features include an input range from GND − 0.5 V to VCC + 0.2 V, low noise, TTL-/CM

轨到轨、2.5 V至5.5 V、单电源TTL/CMOS极快型比较器，采用6引脚SC70封装

ADCMP600、ADCMP601和ADCMP602均为极快型比较器，采用ADI公司的专有XFCB2工艺制造。这些比较器具有极其丰富多样的功能特性，并且易于使用，具体包括：输入范围从VEE − 0.5 V至VCC + 0.2 V，低噪声TTL-/CMOS-兼容输出驱动器，以及带可调迟滞功能的锁存输入和/或关断输入。\n\n 在电源电流典型值为3 mA时，这些器件可提供5 ns传播延迟、10 mV过驱性能。\n\n 三款器件均提供灵活的电源方案：可采用+2.5 V单正电源供电，输入信号范围为-0.5 V至+2.8 V；也可采用最高+5.5 V正电源供电，输入信号范围为-0.5 • 额定轨到轨电压VCC：2.5 V至5.5 V\n\n• 输入共模电压范围：−0.2 V至VCC + 0.2 V\n\n• 低突波CMOS-/TTL-兼容输出级\n\n• 传播延迟：3.5 ns\n\n• 功耗：10 mW (3.3 V);

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V

文件：291.46 Kbytes Page：16 Pages

丝印代码：G0N；Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators

GENERAL DESCRIPTION The ADCMP600, ADCMP601, and ADCMP602 are very fast comparators fabricated on XFCB2, an Analog Devices, Inc. proprietary process. These comparators are exceptionally versatile and easy to use. Features include an input range from GND − 0.5 V to VCC + 0.2 V, low noise, TTL-/CM

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators

GENERAL DESCRIPTION The ADCMP600, ADCMP601, and ADCMP602 are very fast comparators fabricated on XFCB2, an Analog Devices, Inc. proprietary process. These comparators are exceptionally versatile and easy to use. Features include an input range from GND − 0.5 V to VCC + 0.2 V, low noise, TTL-/CM

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators

GENERAL DESCRIPTION The ADCMP600, ADCMP601, and ADCMP602 are very fast comparators fabricated on XFCB2, an Analog Devices, Inc. proprietary process. These comparators are exceptionally versatile and easy to use. Features include an input range from GND − 0.5 V to VCC + 0.2 V, low noise, TTL-/CM

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators

GENERAL DESCRIPTION The ADCMP600, ADCMP601, and ADCMP602 are very fast comparators fabricated on XFCB2, an Analog Devices, Inc. proprietary process. These comparators are exceptionally versatile and easy to use. Features include an input range from GND − 0.5 V to VCC + 0.2 V, low noise, TTL-/CM

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V

文件：291.46 Kbytes Page：16 Pages

丝印代码：G0N；Rail-to-Rail, Very Fast, 2.5 V to 5.5 V

文件：291.46 Kbytes Page：16 Pages

丝印代码：G0N；Rail-to-Rail, Very Fast, 2.5 V to 5.5 V,

文件：291.46 Kbytes Page：16 Pages

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V

文件：291.46 Kbytes Page：16 Pages

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V

文件：291.46 Kbytes Page：16 Pages

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V

文件：291.46 Kbytes Page：16 Pages

VOLTAGE 50 to 1000 Volts CURRENT - P.C. MTG 3A , HEAT-SINK MTG 6A

VOLTAGE 50 to 1000 Volts CURRENT - P.C. MTG 3A , HEAT-SINK MTG 6A FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. • Surge Overload Ratings to 125 Amperes. • Low forward voltage, and reverse leakage. • Small size , simple installation.

Silicon Varistor Temperature Compensating Diode

Features: ● High reliability planar chip and glass sealing ● Low IR ● Large PD

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound ● Glass passivated junction in P600 package ● 6 ampere operation at TA=60 ¢J with no thermal runaway ● Exce

FAST SWITCHING RECOVERY RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

FEATURES ● Low cost ● Diffused junction ● Low forward voltage drop ● High current capability Fast switching for high efficiency ● The plastic meterial carries U/L recognition 94V-O ● Exceeds environmental standards of MIL-S-19500/228

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound ● Void-free Plastic in P600 package ● 6.0 ampere operation at TA=55 ¢J with no thermal runaway ● Ex