Dual High Speed PECL Comparators

GENERAL DESCRIPTION The ADCMP561/ADCMP562 are high speed comparators fabricated on Analog Devices’ proprietary XFCB process. The devices feature a 700 ps propagation delay with less than 75 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing ove

双路高速PECL比较器，采用20引脚QSOP封装

ADCMP561/ADCMP562均为高速比较器，采用ADI公司的专有XFCB工艺制造。这些器件的传播延迟为1 ns，过驱消散小于150 ps。消散是对不同过驱条件下传播延迟差异的量度，它是高速比较器的一个特别重要的特性。ADCMP562上提供单独的可编程迟滞引脚。\n\n 差分输入级使各种信号的传播延迟可以保持一致，共模范围为-2.0 V至+3.0 V。输出为互补数字信号，与PECL 10 K和10 KH逻辑系列完全兼容。这些输出提供充足的驱动电流，可直接驱动采用50 Ω电阻端接至VDD - 2 V的传输线路。上述器件还提供锁存输入，并可采用跟踪、跟踪保持或采样保持工作模式。\n\ • 差分PECL兼容输出\n• 输入至输出传播延迟：700 ps\n• 传播延迟消散：75 ps\n• 输入共模范围：-2.0 V至+3.0 V\n• 鲁棒的输入保护\n• 差分锁存控制\n• 内部锁存上拉电阻\n• 电源抑制：> 85 dB\n• 脉冲宽度：700 ps（最小值）\n• 等效输入上升时间带宽：1.5 GHz\n• 典型输出上升/下降时间：500 ps\n• ESD保护> 4 kV HBM >200 V MM\n• 可编程迟滞;

Dual High Speed PECL Comparators

GENERAL DESCRIPTION The ADCMP561/ADCMP562 are high speed comparators fabricated on Analog Devices’ proprietary XFCB process. The devices feature a 700 ps propagation delay with less than 75 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing ove

Dual High Speed PECL Comparators

GENERAL DESCRIPTION The ADCMP561/ADCMP562 are high speed comparators fabricated on Analog Devices’ proprietary XFCB process. The devices feature a 700 ps propagation delay with less than 75 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing ove

Dual High Speed PECL Comparators

GENERAL DESCRIPTION The ADCMP561/ADCMP562 are high speed comparators fabricated on Analog Devices’ proprietary XFCB process. The devices feature a 700 ps propagation delay with less than 75 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing ove

Dual High Speed PECL Comparators

文件：341.6 Kbytes Page：16 Pages

PNP Silicon Digital Transistor (Switching circuit, inverter, interface circuit, driver circuit)

PNP Silicon Digital Transistor • Switching circuit, inverter, interface circuit, driver circuit • Built in bias resistor (R1=4.7kΩ, R2=4.7kΩ)

PNP EPITAXIAL PLANAR TRANSISTOR

Description The HSB562 is designed for general purpose low frequency power amplifier applications.

EPITAXIAL PLANAR PNP TRANSISTOR (SWITCHING, INTERFACE CIRCUIT AND DRIVER CIRCUIT)

SWITCHING APPLICATION. INTERFACE CIRCUIT AND DRIVER CIRCUIT APPLICATION. FEATURES ● With Built-in Bias Resistors. ● Simplify Circuit Design. ● Reduce a Quantity of Parts and Manufacturing Process. ● High Packing Density.

Two Channel Direct Drive Speech Controller?

INTRODUCTION SNC562 is a two-channel voice synthesizer IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit input port and two 4-bit I/O ports. By programming through the tiny controller in SNC562, user’s varied applications including voice section combination, key

RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS

HF to 2000 MHz Class AB Common Source - PowerSO-10RF VHF / UHF radio and digital cellular BTS applications HF to 2000MHz class AB common source - PowerFLAT VHF / UHF radio applications HF to 2000MHz class AB common cource - ceramic packages UHF TV and digital cellular BTS applications 2