Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Ultralow Noise Amplifier at Lower Power

FEATURES Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultralow distortion: 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew rate: 12 V/μs typical Dual-supply operation: ±4.5 V to ±18 V Unity-gain stable Extended

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

双路、低成本、低噪声、CMOS轨到轨输出运算放大器

AD8691、AD8692和AD8694分别是单路、双路和四路、低成本、轨到轨输出、单电源放大器，具有低失调、低输入电压、低电流噪声及宽信号带宽等特性。低失调、低噪声、极低的输入偏置电流和高速度特性相结合，使这些放大器适合各种应用。滤波器、积分器、光电二极管放大器和高阻抗传感器等器件均可受益于这一特性组合。宽带宽和低失真特性则有益于音频和其它交流应用。\n\n 这些放大器的具体应用包括：功率放大器(PA)控制、激光二极管控制环路、便携式和环路供电仪器仪表、便携式设备的音频放大以及ASIC输入和输出放大器。\n\n AD8691提供小型SC70和TSOT两种封装形式，可靠近传 • 失调电压：400 µV(典型值)\n\n• 低失调电压漂移：最大6 µV/°C\n(AD8692/AD8694) \n\n• 极低输入偏置电流：1 pA(最大值)\n\n• 低噪声：8 nV/√Hz\n\n• 通过汽车应用认证\n\n• 低失真：0.0006%\n\n• 宽带宽：10 MHz\n\n• 单位增益稳定\n\n• 单电源供电：2.7 V至6 V;

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

文件：433.89 Kbytes Page：12 Pages

Ultralow Noise Amplifier at Lower Power

文件：1.57654 Mbytes Page：24 Pages

Low Power, 3.6 MHz, Low Noise, Rail-to - Rail Output, Operational Amplifiers

文件：706 Kbytes Page：20 Pages

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers

文件：804.73 Kbytes Page：19 Pages

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

丝印代码：APA；Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

丝印代码：APA；Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

丝印代码：APA；Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

文件：433.89 Kbytes Page：12 Pages

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

文件：433.89 Kbytes Page：12 Pages

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

文件：433.89 Kbytes Page：12 Pages

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

文件：433.89 Kbytes Page：12 Pages

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers

文件：433.89 Kbytes Page：12 Pages

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Microprocessor Supervisory Circuits

GENERAL DESCRIPTION The ADM8690/ADM8691/ADM8695 supervisory circuits offer complete single-chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include microprocessor reset, backup battery switchover, watchdog timer, CMOS RAM write pr

Microprocessor Supervisory Circuits

GENERAL DESCRIPTION The ADM8690–ADM8695 family of supervisory circuits offers complete single chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include µP reset, backup battery switchover, watchdog timer, CMOS RAM write protection

Microprocessor Supervisory Circuits

GENERAL DESCRIPTION The ADM8690–ADM8695 family of supervisory circuits offers complete single chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include µP reset, backup battery switchover, watchdog timer, CMOS RAM write protection

Microprocessor Supervisory Circuits

GENERAL DESCRIPTION The ADM8690/ADM8691/ADM8695 supervisory circuits offer complete single-chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include microprocessor reset, backup battery switchover, watchdog timer, CMOS RAM write pr

Microprocessor Supervisory Circuits

GENERAL DESCRIPTION The ADM8690–ADM8695 family of supervisory circuits offers complete single chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include µP reset, backup battery switchover, watchdog timer, CMOS RAM write protection