高压、高带宽、电流检测放大器

AD8410 是一款高压、高分辨率和高带宽分流放大器。其初始增益为 20 V/V，具有 2.0 MHz 带宽，在整个温度范围内的最大增益误差为 ±0.3%。缓冲输出电压可以直接与任何典型转换器连接。AD8410 在输入共模电压处于 −2 V 至 +70 V 范围时，具有出色的输入共模抑制性能；它能够在分流电阻上进行双向电流的测量，适合各种汽车和工业应用，包括电机控制、电源管理和电磁阀控制等。\n\n 在 −40°C 至 +150°C 的整个温度范围内，AD8410 都能提供极佳的性能。它采用封装调整内核，在整个工作温度范围和共模电压范围内，失调漂移典型值为 1.0 µV/°C • 高共模输入电压范围\n• −2V 至 +70 V（连续）\n• 耐压范围：-20V 至 +75 V\n\n• 失调漂移：1.0 µV/°C（典型值）\n• 2.0 MHz 带宽\n• 失调电压：±400 µV（最大值，全温度范围）\n• 初始增益 = 20 V/V\n• 宽工作温度范围\n• AD8410WB: −40°C 至 +125°C\n• AD8410WH: −40°C 至 +150°C\n\n• 双向操作\n• 电源工作范围：3.0 V 至 5.5 V\n• 提供 8 引脚 MSOP 和 8 引脚 SOIC 封装\n• 共模抑制比(CMRR)：86 dB，直流至 10 kHz\n;

High Voltage, High Bandwidth Current Sense Amplifier

文件：4.07917 Mbytes Page：4 Pages

−2 V to 70 V Wide Input Voltage Range, 2.2 MHz High Bandwidth, Current-Sense Amplifier with PWM Rejection

GENERAL DESCRIPTION The AD8410A1 is a high voltage, high bandwidth current-sense amplifier. The device features an initial gain of 20 V/V, with a 2.2 MHz bandwidth with a maximum ±0.13 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typic

−2 V to 70 V Wide Input Voltage Range, 2.2 MHz High Bandwidth, Current-Sense Amplifier with PWM Rejection and Gain 20 V/V

FEATURES ► 2.2 MHz small signal, −3 dB bandwidth ► In-package Trim Core (DigiTrim™) ► Precision without chopping and/or autozero ► Typical ±0.21 µV/°C offset drift ► Maximum ±200 µV voltage-offset over temperature range ► Typical DC CMRR: 142 dB ► Typical AC CMRR at 50 kHz: 96 dB ► Wide co

−2 V至70 V宽输入电压范围，2.2 MHz高带宽，具有PWM抑制和增益20 V/V的电流检测放大器

AD8410A是一款高电压、高带宽电流检测放大器。该器件的初始增益为20 V/V，具有2.2 MHz带宽，在整个温度范围内的最大增益误差为±0.13%。缓冲输出电压可以直接与任何典型转换器连接。AD8410A在−2 V至+70 V范围内的最小直流共模抑制比(CMRR)为123 dB。AD8410A在各种工业和汽车应用中通过分流电阻执行双向电流测量。\n\n 在−40°C至+125°C的整个温度范围内，AD8410A都能提供出色的性能。该器件采用封装调整内核，在整个工作温度范围和共模电压范围内，典型失调漂移为±0.21μV/°C（基于黑盒法，参见数据手册中的图53），无需斩波和 • 2.2 MHz 小信号，−3 dB 带宽\n\n• 封装内微调内核 (DigiTrim™)\n• 不使用斩波和/或自动调零的精度\n\n• 失调漂移为 ±0.21 μV/°C（典型值）\n\n• 整个温度范围下的电压偏移最大为 ±200 μV\n\n• 直流 CMRR 典型值：142 dB\n\n• 50 kHz 时的 AC CMRR 典型值：96 dB\n\n\n\n\n• 宽共模输入电压范围\n• −2 V 至 +70 V，连续运营\n\n• −20 V 至 +85 V，连续生存能力;

−2 V to 70 V Wide Input Voltage Range, 2.2 MHz High Bandwidth, Current-Sense Amplifier with PWM Rejection

GENERAL DESCRIPTION The AD8410A1 is a high voltage, high bandwidth current-sense amplifier. The device features an initial gain of 20 V/V, with a 2.2 MHz bandwidth with a maximum ±0.13 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typic

−2 V to 70 V Wide Input Voltage Range, 2.2 MHz High Bandwidth, Current-Sense Amplifier with PWM Rejection and Gain 20 V/V

FEATURES ► 2.2 MHz small signal, −3 dB bandwidth ► In-package Trim Core (DigiTrim™) ► Precision without chopping and/or autozero ► Typical ±0.21 µV/°C offset drift ► Maximum ±200 µV voltage-offset over temperature range ► Typical DC CMRR: 142 dB ► Typical AC CMRR at 50 kHz: 96 dB ► Wide co

−2 V to 70 V Wide Input Voltage Range, 2.2 MHz High Bandwidth, Current-Sense Amplifier with PWM Rejection

GENERAL DESCRIPTION The AD8410A1 is a high voltage, high bandwidth current-sense amplifier. The device features an initial gain of 20 V/V, with a 2.2 MHz bandwidth with a maximum ±0.13 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typic

−2 V to 70 V Wide Input Voltage Range, 2.2 MHz High Bandwidth, Current-Sense Amplifier with PWM Rejection

GENERAL DESCRIPTION The AD8410A1 is a high voltage, high bandwidth current-sense amplifier. The device features an initial gain of 20 V/V, with a 2.2 MHz bandwidth with a maximum ±0.13 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typic

Fast high-voltage soft-recovery rectifiers

DESCRIPTION Rugged glass package, using a high temperature alloyed construction. This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. The package is designed to be used in an insulating medium such as resin, oil or SF6 gas. FEATURES

0.800-INCH SEVEN SEGMENT DISPLAYS

文件：453.28 Kbytes Page：4 Pages

DUAL POWER OPERATIONAL AMPLIFIER

文件：281.97 Kbytes Page：8 Pages

DUAL POWER OPERATIONAL AMPLIFIER

文件：281.97 Kbytes Page：8 Pages

DUAL POWER OPERATIONAL AMPLIFIER

文件：281.97 Kbytes Page：8 Pages