250 MHz, Voltage Output 4-Quadrant Multiplier

GENERAL DESCRIPTION The AD835 is a complete four-quadrant, voltage output analog multiplier, fabricated on an advanced dielectrically isolated complementary bipolar process. It generates the linear product of its X and Y voltage inputs with a −3 dB output bandwidth of 250 MHz (a small signal rise

250 MHz, Voltage Output,4-Quadrant Multiplier

GENERAL DESCRIPTION The AD835 is a complete four-quadrant, voltage output analog multiplier, fabricated on an advanced dielectrically isolated complementary bipolar process. It generates the linear product of its X and Y voltage inputs with a −3 dB output bandwidth of 250 MHz (a small signal rise

250 MHz, Voltage Output, 4-Quadrant Multiplier

FEATURES Simple: basic function is W = XY + Z Complete: minimal external components required Very fast: Settles to 0.1% of full scale (FS) in 20 ns DC-coupled voltage output simplifies use High differential input impedance X, Y, and Z inputs Low multiplier noise: 50 nV/√Hz APPLICATIONS

250 MHz电压输出4象限乘法器

AD835是一款完整的四象限电压输出模拟乘法器，采用先进的介质隔离互补双极性工艺制造。它产生X和Y电压输入的线性乘积，−3 dB输出带宽为250 MHz（小信号上升时间为1 ns）。满量程（−1 V至+1 V）上升至下降时间为2.5 ns（采用150 Ω标准RL），0.1%建立时间通常为20 ns。\n\n 其差分乘法输入（X, Y）和求和输入（Z）处于高阻态。低阻抗输出电压（W）最高可达±2.5 V，可驱动低至25 Ω的负载。正常工作时采用±5 V电源。\n\n AD835不仅具有出众的速度性能，而且易于使用，功能丰富。例如，除允许在输出端添加信号外，Z输入端还能 • 简单：基本函数为W = XY + Z \n\n• 完整：只需极少的外部元件 \n\n• 直流耦合电压输出简化应用;

丝印代码：AD83586C；2x60W Stereo / 1x120W Mono / 2x30W1x60W 2.1CH Digital Audio Amplifier with 36 bands EQ and DRC Functions

Features 16/18/20/24-bits input with I2 S, Left-alignment and Right-alignment and TDM data format PSNR & DR(A-weighting) Loudspeaker: 130dB (PSNR), 106dB (DR)@24V  Multiple sampling frequencies (Fs) 8kHz, 16kHz and 32kHz / 44.1kHz / 48kHz and 88.2k / 96kHz System clock = 32x,48x, 64x,

250 MHz, Voltage Output, 4-Quadrant Multiplier

FEATURES Simple: basic function is W = XY + Z Complete: minimal external components required Very fast: Settles to 0.1% of full scale (FS) in 20 ns DC-coupled voltage output simplifies use High differential input impedance X, Y, and Z inputs Low multiplier noise: 50 nV/√Hz APPLICATIONS

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion 1.0 GHz Differential Amplifier

PRODUCT DESCRIPTION The AD8350 series are high performance fully-differential amplifiers useful in RF and IF circuits up to 1000 MHz. The amplifier has excellent noise figure of 5.9 dB at 250 MHz. It offers a high output third order intercept (OIP3) of +28 dBm at 250 MHz. Gain versions of 15 dB a

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

低失真RF/IF差分放大器

AD8351是一款完全差分放大器，可用于在通信收发器中，以中频频率驱动高分辨率(10-14位)/高速ADC (240 MSPS)。\n\n AD8351简化了ADC驱动，用户可以通过一个外部电阻调整增益(最高26 dB)，同时集成了输出共模调整电路，以降低输入ADC中的驱动电平。\n\n AD8351是一种极低失真增益级，同时具有低噪声和宽增益带宽特性，因而非常适合数字通信中频接收机使用。该器件可以在多种常用中频频率70/140/240 MHz下工作。\n\n 关于驱动12/14位分辨率ADC以及用该器件进行单端至差分信号转换的详细电路信息，参见AD8351产品数 • 3 dB带宽：2.2 GHz (AV = 12 dB) \n\n• 单电阻可编程增益\n  0 dB ≤ AV≤ 26 dB\n\n• 差分接口 \n\n• 低噪声输入级：2.7 nV/√Hz (AV = 10 dB) \n\n• 低谐波失真\n  –79 dBc（二阶，70 MHz）\n  –81 dBc（三阶，70 MHz）\n\n• OIP3：31 dBm (70 MHz) \n\n• 单电源供电： 3 V至5.5 V \n\n• 低功耗： 28 mA (5 V) \n\n• 可调输出共模电压 \n\n• 快速建立和过驱恢复 \n\n• 压摆率：13,000 V/μs \n\n• 省;

Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

丝印代码：Q20；Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

丝印代码：JDA；Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

丝印代码：JDA；Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

丝印代码：JDA；Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

丝印代码：JDA；Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion pe

Low Distortion Differential RF/IF Amplifier

FEATURES −3 dB bandwidth of 2.2 GHz for AV = 12 dB Single resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage 2.7 nV/√Hz at AV = 10 dB Low harmonic distortion −79 dBc second at 70 MHz −81 dBc third at 70 MHz OIP3 of 31 dBm at 70 MHz Single-supply operation:

航空航天用低失真、完全差分射频/中频放大器

AD8351S是一款全差分放大器，可用于在通信收发器中，以IF频率驱动高分辨率（10-14位）/高速ADC (240 MSPS)。\n\n AD8351S简化了ADC驱动，用户可以通过一个外部电阻调整增益（最高26dB），同时集成了输出共模调整电路，以降低输入ADC中的驱动电平。\n\n AD8351S是一种极低失真增益级，同时具有低噪声和宽增益带宽特性，因而非常适合数字通信IF接收机使用。\n\n 关于驱动12/14位分辨率ADC以及用该器件进行单端至差分信号转换的详细电路信息，参见AD8351S产品数据手册。\n\n AD8351S采用先进的硅双极 • 宽带宽：450 MHz（-3dB带宽，6dB增益)\n\n• 通过一个外部电阻设置增益（0dB至26dB)\n\n• 可调输出共模电压;

2 GHz Ultralow Distortion Differential RF/IF Amplifier

GENERAL DESCRIPTION The AD8352 is a high performance differential amplifier optimized for RF and IF applications. It achieves better than 80 dB SFDR performance at frequencies up to 200 MHz, and 65 dB beyond 500 MHz, making it an ideal driver for high speed 12-bit to 16-bit analog-to-digital conv