Single Supply, Rail-to-Rail Low Power FET-Input Op Amp

GENERAL DESCRIPTION The AD822 is a dual precision, low power FET input op amp that can operate from a single supply of 3.0 V to 36 V or dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below the negative rail, allowing the AD822 to acc

Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp

FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 30 V Dual-supply capability from ±2.5 V to ±15 V High load drive Capacitive load drive of 350 pF, G = +1 Minimum output current of 15 mA Excellent

Low Noise, Precision, Rail-to-Rail Output, JFET Single/Dual/Quad Op Amps

FEATURES Low offset voltage B grade: 0.4 mV maximum (ADA4610-1/ADA4610-2 only) A grade: 1 mV maximum Low offset voltage drift B grade: 2 μV/°C maximum (ADA4610-1/ADA4610-2 only) A grade: 8 μV/°C maximum (SOIC, MSOP, LFCSP packages) Low input bias current: 5 pA typical Dual-supply operation

单电源、轨到轨、低功耗、FET输入双通道运算放大器

AD822是一款双通道、精密、低功耗、FET输入运算放大器，可以采用5 V至30 V单电源或±2.5 V至±15 V双电源供电。该放大器具有单电源供电能力，输入电压范围可扩展至负供电轨以下，因此它在单电源模式下可以处理地电压以下的输入信号。输出电压摆幅可扩展至各供电轨10 mV以内，以提供最大的输出动态范围。\n\n 直流精度性能包括最大800 μV的失调电压、2 μV/°C的失调电压漂移、小于25 pA的输入偏置电流以及低输入电压噪声，源阻抗最高可达1 GΩ。单位增益带宽为1.8 MHz，10 kHz时总谐波失真（THD）为–93 dB，压摆率为3 V/μs，每个放大器的电源电流低 • 真正的单电源供电\n• 轨到轨输出摆幅\n\n• 输入电压范围扩展至地电压以下\n\n• 5 V至30 V单电源供电能力\n\n• 双电源供电：±2.5 V至±15 V\n\n\n\n\n• 高负载驱动能力\n• 350 pF、G = +1的容性负载驱动能力\n\n• 最小输出电流：15 mA\n\n\n\n\n• 欲了解更多特性，请参考数据手册\n\n\nAD822-EP支持防务和航空航天应用（AQEC标准）\n• 下载AD822-EP数据手册(pdf)\n\n• 军用温度范围（−55℃至+125℃）\n\n• 受控制造基线\n\n• 封装/测试厂\n\n• 制造厂\n\n• 增强型产品;

Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp

文件：595.52 Kbytes Page：28 Pages

MicroConverter짰 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes Page：88 Pages

Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp

FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 30 V Dual-supply capability from ±2.5 V to ±15 V High load drive Capacitive load drive of 350 pF, G = +1 Minimum output current of 15 mA Excellent

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

Precision, Dual-Channel Instrumentation Amplifier

GENERAL DESCRIPTION The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000. The AD8222 is the first dual-instrumentation amplifier in the small 4 mm × 4mm LFCSP. It requires the same board area a

10 MHz, 20 V/關s, G = 1, 10, 100, 1000 i CMOS짰 Programmable Gain Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier with Level Shift and Output Clamping

DESCRIPTION The LT®6372-1 is a gain programmable, high precision instrumentation amplifier that delivers industry leading DC precision. This high precision enables smaller signals to be sensed and eases calibration requirements, particularly over temperature. The LT6372-1 incorporates features in

精密仪表放大器

AD8221是一款增益可编程、高性能仪表放大器，在业界同类产品中，具有相对于频率的最高共模抑制比(CMRR)性能。目前市场上仪表放大器产品的CMRR已降至200 Hz。相比之下，G = 1、频率最高为10 kHz时，AD8221所有等级产品的共模抑制比（CMRR）均保持最低80 dB。相对于频率的高CMRR使得AD8221可以抑制宽带干扰和线性谐波，大大简化了滤波器要求。可能的应用包括精密数据采集、生物医学分析和航空航天仪器。 \n\n 低电压失调、低失调漂移、低增益漂移、高增益精度和高共模抑制比特性，使这款器件成为需要具备最佳直流性能应用（如桥式信号调理）的绝佳选择。\n\n • 提供节省空间的MSOP封装\n\n• 增益通过1个外部电阻设置（增益范围：1至1000）\n\n• 宽电源电压范围：±2.3 V至±18 V\n\n• 额定温度范围：−40°C至+85°C\n\n• 工作温度最高可达125°C\n\n• 出色的交流规格\n• CMRR：80 dB（最小值，10 kHz，G = 1） \n\n• −3 dB带宽：825 kHz (G = 1)\n\n• 2 V/µs压摆率\n\n\n\n\n• 欲了解更多特性，请参考数据手册\n\n• 下载AD8221-KGD数据手册\n\n• 还提供已知良好的裸片并完全保证达到数据手册规格性能;

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

10 MHz, 20 V/關s, G = 1, 10, 100, 1000 i CMOS짰 Programmable Gain Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

Precision, Dual-Channel Instrumentation Amplifier

GENERAL DESCRIPTION The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000. The AD8222 is the first dual-instrumentation amplifier in the small 4 mm × 4mm LFCSP. It requires the same board area a

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR

Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry’s highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR