SILICON DUAL DIFFERNTIAL AMPLIFIER TRANSISTORS

文件：141.36 Kbytes Page：1 Pages

Bidirectional, Zero Drift, Current Sense Amplifier

GENERAL DESCRIPTION The AD8417-2 is a high-voltage, high-resolution dual-channel current shunt amplifier. It features an initial gain of 60 V/V and performs bidirectional current measurements across a shunt resistor in a variety of automotive and industrial applications, including motor contr

High-Side Bi-directional Current Shunt Monitor

GENERAL DESCRIPTION The AD8210 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical supply voltage is 5 V. FEATURES ±4000

Precision, Dual-Channel Difference Amplifier

GENERAL DESCRIPTION The AD8270 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier with gains of 0.5, 1, or 2. It can also be configured in over 40 singleended configurations

Dual-Channel Audio Difference Amplifier

GENERAL DESCRIPTION The AD8273 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier (G = ½ or 2), inverting amplifier (G = ½ or 2), or noninverting amplifier (G = 1½ or 3). Th

Bidirectional, Zero Drift, Current Sense Amplifier

GENERAL DESCRIPTION The AD8417 is a high voltage, high resolution current shunt amplifier. It features an initial gain of 60 V/V, with a maximum ±0.3 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8417 offers excelle

航空航天用高压双向分流监控器

AD8210S是一款单电源差动放大器，非常适合在存在大共模电压的情况下放大小差分电压。输入共模电压范围为-2 V至+65 V。典型电源电压为5 V。 \n\n 相对于温度的出色交流和直流性能使测量环路误差保持较小。失调漂移和增益漂移的保证最大值分别为8 μV/°C和20 ppm/°C。 • 高共模电压范围\n\n• 工作电压范围：−2 V至+65 V \n\n• 缓冲输出电压\n\n• 5 mA输出驱动能力\n\n• 宽工作温度范围：−55°C至+125°C;

高压分流监控器

AD8211是一款高压、精密分流放大器，设定增益为20 V/V，在整个温度范围内的典型增益误差为±0.35%。缓冲输出电压可以直接与任何典型转换器连接。无论是否采用5 V电源供电,从−2 V至+65 V均具有出色的共模抑制性能。AD8211在分流电阻上执行单向电流测量，适合各种工业和汽车电子应用，如电机控制、电磁阀控制或电池管理等。\n\n该器件采用特殊专用电路，以保证在0 mV至250 mV整个输入差分电压范围内均可以获得线性输出，无论是否存在共模电压。AD8211的工作温度范围为−40°C至+125°C，采用5引脚小型SOT封装。 • ±4000 V人体模型(HBM) ESD保护\n\n• 高共模电压范围\n工作范围：−2 V至+65 V \n耐压范围：−3 V至+68 V\n\n• 宽工作温度范围5引脚SOT封装：\n−40°C至+125°C\n\n• 通过汽车应用认证\n\n• 缓冲输出电压\n\n• 出色的交流和直流性能\n失调漂移：5 µV/°C(典型值)\n增益漂移：-13 ppm/°C(典型值)\n共模抑制比：120 dB (典型值,DC);

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent commonmode rejection from

Precision, Dual-Channel Difference Amplifier

GENERAL DESCRIPTION The AD8270 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier with gains of 0.5, 1, or 2. It can also be configured in over 40 singleended configurations

Dual-Channel Audio Difference Amplifier

GENERAL DESCRIPTION The AD8273 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier (G = ½ or 2), inverting amplifier (G = ½ or 2), or noninverting amplifier (G = 1½ or 3). Th

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

高压分流监控器

AD8212是一款高共模电压分流监控器， 它能在最高65 V（采用外部PNP晶体管时可大于500 V）的高共模电压情况下，精确放大小差分输入电压。 \n\n AD8212非常适合在负载控制（如电机和电磁阀等）应用中对分流电阻进行电流监控。 器件的电流输出与输入差分电压成正比。 用户可以选择用外部电阻来设置所需的增益。 AD8212的典型共模电压范围为7 V至65 V。 \n\nAD8212还具有高压工作特性，可利用外部高压击穿PNP晶体管来实现。 在这种配置中，AD8212的共模范围等于外部PNP晶体管的击穿电压， 因此很容易实现数百伏的工作电压（参见数据手册的图23）。 \n\nA • 可调增益\n\n• 高共模电压范围\n7 V至65 V(典型值)\n7 V至500 V以上(采用外部调整管)\n\n• 电流输出\n\n• 集成5 V串联稳压器\n\n• 8引脚MSOP封装\n\n• 工作温度范围：−40°C至+125°C;

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

2x25W Stereo / 1x50W Mono Digital Audio Amplifier With 32 bands EQ and DRC Functions

Features 16/18/20/24-bits input with I2 S, Left-alignment, Right-alignment and TDM data format PSNR & DR(A-weighting) Loudspeaker: 107dB (PSNR), 108dB (DR)@24V  Multiple sampling frequencies (Fs) 8kHz, 16kHz, 32kHz/44.1kHz/48kHz and 64kHz/88.2kHz/96kHz System clock = 64x, 128x, 192x,

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across

Dual, High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8213 is a dual-channel, precision current sense amplifier. It features a set gain of 20 V/V, with a maximum ±0.5 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent common-mode rejection from

Dual, High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8213 is a dual-channel, precision current sense amplifier. It features a set gain of 20 V/V, with a maximum ±0.5 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent common-mode rejection from

Dual, High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8213 is a dual-channel, precision current sense amplifier. It features a set gain of 20 V/V, with a maximum ±0.5 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent common-mode rejection from

Dual, High Voltage Current Shunt Monitor

GENERAL DESCRIPTION The AD8213 is a dual-channel, precision current sense amplifier. It features a set gain of 20 V/V, with a maximum ±0.5 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent common-mode rejection from

High Voltage Threshold Detector

GENERAL DESCRIPTION The AD8214 is a fast response, high common-mode voltage, current shunt comparator . The device operates on the high side rail of any DC current sensing application, provided the voltage is between 5 V and 65 V . Internally , the AD8214 features a fast comparator that is opti

High Voltage Threshold Detector

GENERAL DESCRIPTION The AD8214 is a fast response, high common-mode voltage, current shunt comparator . The device operates on the high side rail of any DC current sensing application, provided the voltage is between 5 V and 65 V . Internally , the AD8214 features a fast comparator that is opti

High Voltage Threshold Detector

GENERAL DESCRIPTION The AD8214 is a fast response, high common-mode voltage, current shunt comparator . The device operates on the high side rail of any DC current sensing application, provided the voltage is between 5 V and 65 V . Internally , the AD8214 features a fast comparator that is opti

High Voltage Threshold Detector

GENERAL DESCRIPTION The AD8214 is a fast response, high common-mode voltage, current shunt comparator . The device operates on the high side rail of any DC current sensing application, provided the voltage is between 5 V and 65 V . Internally , the AD8214 features a fast comparator that is opti

High Voltage, Curren Shunt Monitor

GENERAL DESCRIPTION The AD8215 is a high voltage, precision current shunt monitor. It features a set gain of 20 V/V, with a maximum ±0.3 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. Excellent common-mode rejection from −

High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

Low Power, Wide Supply Range, Low Cost Difference Amplifiers,

GENERAL DESCRIPTION The AD8278 and AD8279 are general-purpose difference amplifiers intended for precision signal conditioning in power critical applications that require both high performance and low power. The AD8278 and AD8279 provide exceptional commonmode rejection ratio (80 dB) and high ban

High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

High Resolution, Zero-Drift Current Shunt Monitor

GENERAL DESCRIPTION The AD8217 is a high voltage, high-resolution current shunt amplifier. It features a set gain of 20 V/V, with a maximum ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8217 offers excellent

2x31W Stereo / 1x62W Mono Digital Audio Amplifier With 40 bands EQ and DRC Functions

Features 16/18/20/24-bits input with I2 S, Left-alignment and Right-alignment and TDM data format PSNR & DR(A-weighting) Loudspeaker: 107dB (PSNR), 108dB (DR)@24V  Multiple sampling frequencies (Fs) 8kHz, 16kHz, 32kHz/44.1kHz/48kHz and 88.2kHz/96kHz System clock = 32x, 48x, 64x, 96x,

2x31W Stereo / 1x62W Mono Digital Audio Amplifier With 40 bands EQ and DRC Functions

Features 16/18/20/24-bits input with I2 S, Left-alignment and Right-alignment and TDM data format PSNR & DR(A-weighting) Loudspeaker: 107dB (PSNR), 108dB (DR)@24V  Multiple sampling frequencies (Fs) 8kHz, 16kHz, 32kHz/44.1kHz/48kHz and 88.2kHz/96kHz System clock = 32x, 48x, 64x, 96x,

High Resolution, Zero-Drift Current Shunt Monitor

GENERAL DESCRIPTION The AD8217 is a high voltage, high-resolution current shunt amplifier. It features a set gain of 20 V/V, with a maximum ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8217 offers excellent

High Resolution, Zero-Drift Current Shunt Monitor

GENERAL DESCRIPTION The AD8217 is a high voltage, high-resolution current shunt amplifier. It features a set gain of 20 V/V, with a maximum ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8217 offers excellent

High Resolution, Zero-Drift Current Shunt Monitor

GENERAL DESCRIPTION The AD8217 is a high voltage, high-resolution current shunt amplifier. It features a set gain of 20 V/V, with a maximum ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8217 offers excellent

Zero Drift, Bidirectional Current Shunt Monitor

GENERAL DESCRIPTION The AD8218 is a high voltage, high resolution current shunt amplifier. It features a set gain of 20 V/V, with a maximum ±0.35 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8218 offers excellent i

Zero Drift, Unidirectional Current Shunt Monitor

GENERAL DESCRIPTION The AD8219 is a high voltage, high resolution, current shunt amplifier. It features a set gain of 60 V/V, with a maximum ±0.3 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8219 offers excellent i

Zero Drift, Unidirectional Current Shunt Monitor

GENERAL DESCRIPTION The AD8219 is a high voltage, high resolution, current shunt amplifier. It features a set gain of 60 V/V, with a maximum ±0.3 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8219 offers excellent i

Zero Drift, Unidirectional Current Shunt Monitor

GENERAL DESCRIPTION The AD8219 is a high voltage, high resolution, current shunt amplifier. It features a set gain of 60 V/V, with a maximum ±0.3 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8219 offers excellent i

Bidirectional, Zero Drift, Current Sense Amplifier

文件：300.63 Kbytes Page：16 Pages

High Voltage, Bidirectional Current Shunt Monitor

文件：284.7 Kbytes Page：15 Pages

High Voltage, Bidirectional Current Shunt Monitor

文件：406.35 Kbytes Page：16 Pages

High Voltage, Bidirectional Current Shunt Monitor

文件：354.64 Kbytes Page：16 Pages

High Voltage, High Bandwidth Current Sense Amplifier

文件：4.07917 Mbytes Page：4 Pages