High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

Low Power, Wide Supply Range, Low Cost Difference Amplifiers,

GENERAL DESCRIPTION The AD8278 and AD8279 are general-purpose difference amplifiers intended for precision signal conditioning in power critical applications that require both high performance and low power. The AD8278 and AD8279 provide exceptional commonmode rejection ratio (80 dB) and high ban

宽带宽、双向65V差分放大器

AD8216是一款单电源差动放大器，非常适合在存在大共模电压的情况下放大小差分电压。工作时的输入共模电压范围为-4 V至+65 V。典型电源电压为5 V。AD8216具有3 MHz带宽，允许存在始终小于150 ns的输入至输出传播延迟。该功能非常适合监控负载电流快速增加和减小的应用。 AD8216采用SOIC封装，工作温度范围是-40°C～+125°C。相对于温度的出色交流和直流性能使测量环路误差保持较小。失调漂移和增益漂移的保证最大值分别为20 μV/°C和15 ppm/°C。利用5 V电源和VREF1和VREF2引脚时，输出失调可在0.06 V至4.9 V范围内调整。当VREF1引脚与V+ • ±4000 V人体模型(HBM) ESD保护\n\n• 分流应用的理想之选\n\n• 高共模电压范围\n工作范围：-4 V ～ +65 V\n耐压范围：-4 0V ～ +80 V\n带宽：3 MHz\n输出传播延迟小于100 ns \n\n• 增益: 3 V/V \n\n• 宽工作温度范围:\n−40°C至+125°C\n\n• 可调输出失调 \n\n• 采用8引脚SOIC封装 \n\n• 出众的交流和直流性能 \n失调漂移：10 μV/°C \n增益漂移：10 ppm/°C \n\n• 通过汽车应用认证;

Precision Dual-Channel, Difference Amplifier

文件：605.58 Kbytes Page：20 Pages

Programmable Gain Precision Difference Amplifier

文件：381.07 Kbytes Page：20 Pages

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier

文件：329.74 Kbytes Page：16 Pages

G = 0.2, Level Translation, 16-Bit ADC Driver

文件：398.71 Kbytes Page：16 Pages

Very Low Distortion, Precision Difference Amplifier

文件：375.09 Kbytes Page：16 Pages

High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

High Bandwidth, Bidirectional 65 V Difference Amplifier

GENERAL DESCRIPTION The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −4 V to +65 V. The typical supply voltage is 5 V. The AD8216 features

High Bandwidth, Bidirectional 65 V Difference Amplifier

文件：377.48 Kbytes Page：16 Pages

짹5V, 짹12V (짹15V) Dedicated Microprocessor Voltage Monitors

General Description The MAX8215 contains five voltage comparators; four are for monitoring +5V, -5V, +12V, and -12V, and the fifth monitors any desired voltage. The MAX8216 is identical, except it monitors ±15V supplies instead of ±12V. The resistors required to monitor these voltages and provide

짹5V, 짹12V (짹15V) Dedicated Microprocessor Voltage Monitors

General Description The MAX8215 contains five voltage comparators; four are for monitoring +5V, -5V, +12V, and -12V, and the fifth monitors any desired voltage. The MAX8216 is identical, except it monitors ±15V supplies instead of ±12V. The resistors required to monitor these voltages and provide

4-Bit Bidirectional Bus Transceivers

文件：118.08 Kbytes Page：6 Pages

4-Bit Bidirectional Bus Transceivers

文件：118.08 Kbytes Page：6 Pages

DUAL AUDIO POWER AMPLIFIER

文件：404.58 Kbytes Page：10 Pages