2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V、800 µA、80 MHz轨到轨输入/输出双路放大器

AD8032(双核)是一款单电源电压反馈型放大器，具有高速特性，小信号带宽为80 MHz，压摆率为30 V/µs，建立时间为125 ns。实现以上特性只需采用+5 V单电源供电，功耗小于4.0 mW。这一低功耗特性可以在不牺牲动态性能的情况下延长高速、电池供电系统的工作时间。\n\n AD8032采用单电源供电，具有轨到轨输入和输出特性，额定电源电压为+2.7 V、+5 V和±5 V。输入电压范围可以扩展至各供电轨以外500 mV。输出电压摆幅为各供电轨20 mV以内，以提供较大的输出动态范围。\n\n AD8032还能提供出色的信号质量，而每放大器电源电流仅为800µA。 • 低功耗\n电源电流：800 µA/放大器\n额定电源电压：+2.7 V、+5 V和±5 V \n\n• 高速、快速建立(5 V)\n-3 dB带宽：80 MHz (G = +1)\n30 V/µs压摆率 >\n0.1%建立时间：125 ns \n\n• 低失真\n-62 dB (1 MHz)，VO = 2 V p-p\n-86 dB (100 kHz)，VO = 4.6 V p-p \n\n• 轨到轨输入和输出\n输入高于电源电压0.5 V不会反相\n输入共模电压范围扩展至供电轨200 mV以外\n输出摆幅为任一供电轨20 mV以内\n\n• 输出电流：15 mA\n\n• 高等级;

2.7 V, 800 關A, 80 MHz Rail-to-Rail I/O Amplifiers

文件：430.12 Kbytes Page：20 Pages

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

丝印代码：H9A；2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

丝印代码：H9A；2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

丝印代码：H9A；2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

丝印代码：H9A；2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

丝印代码：H9A；2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

丝印代码：H9A；2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 A, 80 MHz Rail-to-Rail I/O Amplifiers

文件：419.49 Kbytes Page：20 Pages

2.7 V, 800 關A, 80 MHz Rail-to-Rail I/O Amplifiers

文件：430.12 Kbytes Page：20 Pages