2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 關A, 80 MHz Rail-to-Rail I/O Amplifiers

文件：430.12 Kbytes Page：20 Pages

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

2.7 V, 800 關A, 80 MHz Rail-to-Rail I/O Amplifiers

文件：430.12 Kbytes Page：20 Pages

Flowmeter/Threshold detector with paddle wheel

The paddle wheel device Type 8032 is designed for use in clear, neutral or aggressive liquids. The device is provided as flowmeter or threshold detector. The device is made up of a compact Inline sensor-fitting with paddle wheel (Type S030) and a transmitter with display (Type SE32). The device

Flowmeter for the continuous measurement of water

The ultrasonic flowmeter Type 8081 is designed for the flow measurement of water which may also be slightly contaminated. The device consists of a brass fitting with an integrated measuring tube and a transmitter. It is available in 5 variants: QN 0.6 DN 15, QN 1.5 DN 15, QN 2.5 DN 20, QN 3.5

I/O modules IP65/ IP67/ IP69k

Bürkert I/O modules (In/Out) Type ME64 for extending the Industrial Ethernet gateway Type ME63 are designed to capture the switching signals of various sensors. The further processing of these input signals, e.g. by Ethernet protocol to a higher field level, is configured via the gateway. The 1

MCS 51 8-BIT CONTROL-ORIENTED MICROCONTROLLERS

The MCS@51 controllers are optimized for control applications. Byte-processing and numerical operations on small data structures are facilitated by a variety of fast addressing modes for accessing the internal RAM. The instruction set provides a convenient menu of 8-bit arithmetic instructions, in

Specialty Pins

文件：173.18 Kbytes Page：1 Pages