Sub 1GHz 无线通信芯片

A7128 is a high data rate and low cost Sub 1GHz ISM band wireless FSK/GFSK transceiver. It integrates high sensitivity receiver (-88dBm @2Mbps / - 96 dBm @ 500Kbps @ 915MHz), high efficiency power amplifier (up to 10 dBm), frantional-N frequency synthesizer and baseband modem. In typical system, A71 Small size (QFN4 X4, 20 pins).\nSupport 433M / 868M / 915 MHz ISM band.\nSupport FSK/GFSK modulation.\nProgrammable data rate from 100kbps to 2Mbps.\nLow current consumption: RX 18.5mA, TX 36mA (at 10dBm output power).\nLow deep sleep current (0.1 uA).\nLow sleep current (2.0 uA).\nProgrammable RF o;

5 x 7-Dot Character x 16-Digit Display Controller/Driver

GENERAL DESCRIPTION The MSC7128-xx is a general purpose display controller for vacuum fluorescent display tube. The MSC7128-xx drives displays with up to 35 anodes (dots) and up to 16 grids (characters) plus a cursor. The controller accepts command and display data input words on a clocked seri

5 x 7-Dot Character x 16-Digit Display Controller/Driver

GENERAL DESCRIPTION The MSC7128-xx is a general purpose display controller for vacuum fluorescent display tube. The MSC7128-xx drives displays with up to 35 anodes (dots) and up to 16 grids (characters) plus a cursor. The controller accepts command and display data input words on a clocked seri

Integrated Circuit Positive Voltage Regulator with ON/OFF Feature, 12V, 1A

Description: The NTE7128 is a 1A low power–loss voltage regulator in a 4–Lead TO220 type package designed for use in constant voltage power applications in electronic equipment such as VCRs and musical instruments. Features: ● Low Power Loss ● Includes ON/OFF Control Terminal ● Precision Outp

Digital video encoder

GENERAL DESCRIPTION The SAA7128H; SAA7129H encodes digital CB-Y-CR video data to an NTSC, PAL or SECAM CVBS or S-video signal. Simultaneously, RGB or bypassed but interpolated CB-Y-CR signals are available via three additional DACs. FEATURES • Monolithic CMOS 3.3 V device, 5 V I2C-bus optional

Digital video encoder

GENERAL DESCRIPTION The SAA7128H; SAA7129H encodes digital CB-Y-CR video data to an NTSC, PAL or SECAM CVBS or S-video signal. Simultaneously, RGB or bypassed but interpolated CB-Y-CR signals are available via three additional DACs. FEATURES • Monolithic CMOS 3.3 V device, 5 V I2C-bus optional