8-Bit Serial Input Constant-Current Latched LED Driver

Description The A6275 is specifically designed for LED display applications. Each BiCMOS device includes an 8-bit CMOS shift register, accompanying data latches, and eight NPN constant-current sink drivers. Features and Benefits ▪ Up to 90 mA constant-current outputs ▪ Undervoltage lockout ▪

封装/外壳：16-DIP（0.300"，7.62mm） 包装：卷带（TR） 描述：IC LED DRVR LINEAR 75.5MA 16DIP 集成电路（IC） LED 驱动器

8-BIT SERIAL-INPUT, CONSTANTCURRENT LATCHED LED DRIVER

DABiC-IV, 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVER The A6818– devices combine a 32-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuum fluorescent displays, the 60 V and -40 mA outpu

8-BIT SERIAL-INPUT, CONSTANTCURRENT LATCHED LED DRIVER

DABiC-IV, 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVER The A6818– devices combine a 32-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuum fluorescent displays, the 60 V and -40 mA outpu

8-BIT SERIAL-INPUT, CONSTANTCURRENT LATCHED LED DRIVER

DABiC-IV, 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVER The A6818– devices combine a 32-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuum fluorescent displays, the 60 V and -40 mA outpu

4-Channel Laser Diode Driver Oscillator

General Description The EL6275C is a four channel laser diode current amplifier that provides controlled current to a grounded laser diode. Channels 2, 3, and 4 should be used as the write channels, with switching speeds of approximately three nanosecond rise/fall time. Features • Shrink-Small

5V DISK DRIVE SPINDLE & VCM, POWER & CONTROL ?쏞OMBO?

DESCRIPTION The L6275 integrates into a single chip both spindle and VCM controllers as well as power stages. The device is designed for 12V disk drive application requiring up to 2.0A of spindle and 1.5A of VCM peak currents. GENERAL ■ 5V (+/- 10) OPERATION. ■ REGISTER BASED ARCHITECTURE ■ M