5V DISK DRIVE SPINDLE & VCM, POWER & CONTROL ?쏞OMBO?

DESCRIPTION The L6275 integrates into a single chip both spindle and VCM controllers as well as power stages. The device is designed for 12V disk drive application requiring up to 2.0A of spindle and 1.5A of VCM peak currents. GENERAL ■ 5V (+/- 10) OPERATION. ■ REGISTER BASED ARCHITECTURE ■ M

5V DISK DRIVE SPINDLE & VCM, POWER & CONTROL “COMBO”

8-BIT SERIAL-INPUT, CONSTANTCURRENT LATCHED LED DRIVER

DABiC-IV, 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVER The A6818– devices combine a 32-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuum fluorescent displays, the 60 V and -40 mA outpu

8-BIT SERIAL-INPUT, CONSTANTCURRENT LATCHED LED DRIVER

DABiC-IV, 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVER The A6818– devices combine a 32-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuum fluorescent displays, the 60 V and -40 mA outpu

8-BIT SERIAL-INPUT, CONSTANTCURRENT LATCHED LED DRIVER

DABiC-IV, 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVER The A6818– devices combine a 32-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuum fluorescent displays, the 60 V and -40 mA outpu

4-Channel Laser Diode Driver Oscillator

General Description The EL6275C is a four channel laser diode current amplifier that provides controlled current to a grounded laser diode. Channels 2, 3, and 4 should be used as the write channels, with switching speeds of approximately three nanosecond rise/fall time. Features • Shrink-Small