LEVER ACTION PC CARD EJECTORS

[KEYSTONE] LEVER ACTION PC CARD EJECTORS Card ejectors offer a simple and reliable way of installing and ejecting circuit boards. Card ejectors reduce the stress on board connectors by improper removal of board. Ejectors also protect components on board from damage during removal or installati

Vibrating filling level switch with extension tube

The Type 8112 is a filling level switch for liquids, using a tuning fork as the sensor element. It is designed for industrial use in areas of process technology and can be used in liquids. Typical applications are overfill or dry run protection. The Type 8112 is available with different sensor

Pneumatically operated 2/2-way valve with separating diaphragm

The externally piloted 2-way valve is operated by a diaphragm actuator. A diaphragm between valve body and actuator separates the media. A double spindle seal guarantees high tightness and a high service live. The compact actuator housing is made out of chemical resistant plastic and is ideal

Inline positive displacement (PD) flowmeter or Inline batch controller

The device Type SE35 + S077 is specially designed for continuous flow measurement of highly viscous fluids like glue, honey or oil. slightly aggressive, solid-free liquids. The device is provided as flowmeter or batch controller. The device is made up of a compact Inline sensor-fitting with ova

Radar level meter for aggressive media

Type 8136 is a non-contact radar level meter for continuous level measurement. The unit is available in two variants: • with encapsulated horn antenna. Particularly suitable for the level measurement of aggressive liquids in small vessels. • with plastic horn antenna. Particularly suitable f

Pneumatically operated 3/2-way seat valve CLASSIC

The Bürkert 3/2-way seat valve Type 2006 consists of a pneumatically operated CLASSIC actuator and a 3-way valve body. The actuator is available in two different materials, PA or PPS, depending on the ambient temperature. Interchanging of pressure and working connections enables different fluid

Insertion flowmeter/batch controller with paddle wheel and flow transmitter/remote batch controller

The Type 8025 device is specially designed for use in neutral or slightly aggressive, solid-free liquids. The device is provided as flowmeter or batch controller in a compact variant with paddle-wheel sensor or in a remote variant. The Bürkert-designed fitting system ensures simple installation

Radar level meter for higher pressure ranges

Type 8137 is a non-contact radar level meter for continuous level measurement. The unit is available in two variants: • with thread and horn antenna (ø 40 mm). Particularly suitable for use in small tanks and process vessels for the level measurement of practically any product. • with flange

Pneumatically operated 2/2-way angle seat valve with stainless steel actuator

The pneumatically operated angle seat valve with stainless steel actuators fulfils the demands of tough process environments. Unrivalled life time and sealing integrity is guaranteed by the trusted self-adjusting spindle sealing. The stainless steel actuator has been designed for tough applicat

Flowmeter/Threshold detector with paddle wheel

The paddle wheel device Type 8032 is designed for use in clear, neutral or aggressive liquids. The device is provided as flowmeter or threshold detector. The device is made up of a compact Inline sensor-fitting with paddle wheel (Type S030) and a transmitter with display (Type SE32). The device

Radar level meter for liquids suitable for use in applications with aggressive fluids as well as with hygienic requirements

The Type 8139 is a non-contact radar level measuring device for continuous level measurement. It is available with: • integrated antenna (G- or NPT connection), especially suitable for level measurement of aggressive liquids, with special advantages for small vessels. • plastic horn antenna

Inline flowmeter or Inline batch controller, with paddle wheel

The paddle wheel device Type 8035 is specially designed for use in neutral or slightly aggressive, solid-free liquids. The device is provided as flowmeter or batch controller. The device is made up of a compact Inline sensor-fitting with paddle wheel (Type S030) and a transmitter with display

Inline flowmeter with paddle wheel, ELEMENT design

The paddle wheel device Type 8036 is specially designed for measuring the flow rate in solid-free liquids in a variety of applications (water, waste water monitoring, chemical processing, etc.). The device is made up of a compact sensor-fitting with paddle wheel (Type S030) and a transmitter (

Level measurement device with guided radar

The Type 8188 is a level measurement device with cable, rod, both interchangeable probe or with coax probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. With a measuring range up to 75 m, the 8188 is best sui

Level measurement device with guided radar - sanitary version

The Type 8189 is a level measurement device with interchangeable rod probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. But the main application targets are in Food and Beverage (F&B) and pharmaceutical tan

Magnetic inductive Insertion flowmeter

The electromagnetic flowmeter Type 8045 is made up of an electronic module including a backlit display, operating keys and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more t

Single phase primary switched power supply

Efficient, primary switched mode power supply in slim plastic housing. A powerful and flexible option that’s still light and compact. These power supply units are suitable for a highly diverse range of applications in solar, measurement and control technology as well as industrial and building

Vibrating level switch

The device Type 8110 is a filling level switch for liquids, using a tuning fork as the sensor element. It is designed for industrial use in all areas of process technology and can be used in liquids. Typical applications are overflow or run-dry protection. The small tuning fork (40 mm in lengt

Pressure measuring device / Switch

This intelligent mini transmitter/switch with an extra-large display is specially designed to switch alarms and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the three-key keypad under the display. In addition, the process value can be

Vibrating filling level switch

The Type 8111 is a filling level switch for liquids, using a tuning fork as the sensor element. It is designed for industrial use in all areas of process technology and can be used in liquids. Typical applications are overfill or dry run protection. Depending on the version, the devices are al

Pneumatically operated 2/2 way Valve

The externally piloted 2-way valve is operated by a diaphragm actuator. A double spindle seal guarantees high tightness and a high service live. The compact actuator housing is made out of chemical resistant plastic and ideal for customer specific multifunction block solutions. This low mainte

包装：袋 描述：LAMP INCAND T-1.25 SCREW 14V 光电器件 灯 - 白炽灯，氖灯

包装：散装 描述：EJECTOR CARD LEVEL ACTION 盒子，外壳，机架 卡导槽配件

2/2 way Diaphragm Valve with plastic body, pneumatically operated, DN12 and 15

文件：307.99 Kbytes Page：3 Pages

AMPMODU* Mod I and Mod II Printed Circuit (PC) Board Receptacle Contacts

1. INTRODUCTION This specification covers the requirements for application of AMPMODU Mod I and Mod II pc board receptacle contacts. The Mod I receptacle contacts accept 0.79×1.57 [.031×.062] posts and the Mod II receptacle contacts accept 0.64×0.64 [.025×.025] posts. These strip-fed machine ap

摄像机

压力传感器