Microphone Cable, 3 Conductor 24 AWG, TC

Product Description 24 AWG stranded (45x40) TC alloy conductors, EPDM rubber insulation, conductive textile wrap (100 coverage), TC braid shield (60 coverage), cotton serve, EPDM rubber jacket.

MALE/FEMALE THREADED STANDOFFS

[KEYSTONE] MALE/FEMALE THREADED STANDOFFS PC 104 MOUNTING KITS NYLON STANDOFFS

Multi-Cal-System Evaluation Module

文件：2.52946 Mbytes Page：35 Pages

Heyco-Flex™ Liquid Tight Conduit Fittings

文件：130.509 Kbytes Page：1 Pages

包装：散装 描述：HFC 1 BLACKW/8467 NUT 电缆，电线 - 管理 缆线固定扣

包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：HEX STANDOFF #4-40 ALUM 1-1/8\ 五金件，紧固件，配件 板垫片，支座

Microphone Cable, 3 Conductor 24 AWG, TC

Product Description 24 AWG stranded (45x40) TC alloy conductors, EPDM rubber insulation, conductive textile wrap (100 coverage), TC braid shield (60 coverage), cotton serve, EPDM rubber jacket.

Microphone Cable, 3 Conductor 24 AWG, TC

Product Description 24 AWG stranded (45x40) TC alloy conductors, EPDM rubber insulation, conductive textile wrap (100 coverage), TC braid shield (60 coverage), cotton serve, EPDM rubber jacket.

Corrugated, 50 Ohm, 5 GHz, 85°C, ø27.7 mm, PE jacket

Properties • Light weight • Electrical peormance similar to copper cables • Excellent for multi-operator DAS

Corrugated, 50 Ohm, 2.75 GHz, 85°C, ø50 mm, PE jacket

Properties • Light weight • Electrical peormance similar to copper cables • Excellent for multioperator DAS

2 singlemode fiber Q-ODC plug connector

Properties • Robust push-pull coupling mechanism • Compact design with 2 x 1.25mm ferrules • Highest outdoor installation safety

2 singlemode fiber ODC plug connector

Properties • Screwed locking mechanism • Easy and quick installation • EMI protected

COAXIAL CONNECTOR, QMA, 50 Ohm, Straight bulkhead receptacle, jack (female)

Properties • Excellent electrical peormence • High packing density • Applicable in frequencies up to 18 GHz • Easy to mate - No torque or tooling required • Return loss optimized DC to 6 GHz

COAXIAL CONNECTOR, SMB, 50 Ohm, Straight cable plug (male)

Properties • Snap-on mechanism provides a fast and reliable connection • Ideal for applications with high packaging density • Applicable in frequencies up to 4 GHz

2 singlemode fiber ODC socket square connector

Properties • Screwed locking mechanism • Easy and quick installation • EMI protected

2 singlemode fiber ODC extension connector

Properties • Screwed locking mechanism • Easy and quick installation • EMI protected

2 singlemode fiber ODC socket rear mount connector

Properties • Screwed locking mechanism • Easy and quick installation • EMI protected

CMOS Programmable Interval Timer

The Intersil 82C54 is a high performance CMOS Programmable Interval Timer manufactured using an advanced 2 micron CMOS process. Features • 8MHz to 12MHz Clock Input Frequency • Compatible with NMOS 8254     - Enhanced Version of NMOS 8253 • Three Independent 16-Bit Counters • Six Programmabl

CMOS Programmable Interval Timer

The Intersil 82C54 is a high performance CMOS Programmable Interval Timer manufactured using an advanced 2 micron CMOS process. Features • 8MHz to 12MHz Clock Input Frequency • Compatible with NMOS 8254     - Enhanced Version of NMOS 8253 • Three Independent 16-Bit Counters • Six Programmabl

2 multimode fiber ODC plug connector

Properties • Screwed locking mechanism • Easy and quick installation • EMI protected

2 multimode fiber ODC socket square connector

Properties • Screwed locking mechanism • Easy and quick installation • EMI protected

2 multimode fiber ODC extension connector

Properties • Screwed locking mechanism • Easy and quick installation • EMI protected

LC adapter, SM, UPC, w/o flange, quadruplex, blue

Properties Easy and quick installation

2 multimode fiber Q-ODC plug connector

Properties • Robust push-pull coupling mechanism • Compact design with 2 x 1.25mm ferrules • Highest outdoor installation safety

2 multimode fiber Q-ODC extension connector

Properties • Robust push-pull coupling mechanism • Compact design with 2 x 1.25mm ferrules • Highest outdoor installation safety

CMOS Programmable Peripheral Interface

Description The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 2

CMOS Programmable Peripheral Interface

Description The Harris 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24

CMOS Programmable Peripheral Interface

Description The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 2

CMOS Programmable Peripheral Interface

Description The Harris 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24

CMOS Programmable Peripheral Interface

Description The Harris 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24

CMOS Programmable Peripheral Interface

Description The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 2

CMOS Programmable Peripheral Interface

The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24 I/O pins wh

CMOS Programmable Peripheral Interface

The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24 I/O pins wh

CMOS Programmable Peripheral Interface

Description The Harris 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24

CMOS Programmable Peripheral Interface

Description The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 2

COAXIAL CONNECTOR, MCX, 50 Ohm, Straight cable plug (male)

Properties • Small size • Easy to connect and disconnect • Wide range of board connectors and cable connectors available

CMOS Octal Latching Bus Driver

Description The Intersil 82C82 is a high performance CMOS Octal Latching Buffer manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C82 provides an eight-bit parallel latch/buffer in a 20 pin package. The active high strobe (STB) input allows transparent trans

CMOS Octal Latching Bus Driver

Description The Intersil 82C82 is a high performance CMOS Octal Latching Buffer manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C82 provides an eight-bit parallel latch/buffer in a 20 pin package. The active high strobe (STB) input allows transparent trans

CMOS Octal Latching Inverting Bus Driver

Description The Intersil 82C83H is a high performance CMOS Octal Latching Buffer manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C83H provides an 8-bit parallel latch/buffer in a 20 lead pin package. The active high strobe (STB) input allows transparent transfe

CMOS Octal Latching Inverting Bus Driver

Description The Intersil 82C83H is a high performance CMOS Octal Latching Buffer manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C83H provides an 8-bit parallel latch/buffer in a 20 lead pin package. The active high strobe (STB) input allows transparent transfe

2 singlemode fiber Q-ODC plug connector

Properties • Robust push-pull coupling mechanism • Compact design with 2 x 1.25mm ferrules • Highest outdoor installation safety

2 singlemode fiber Q-ODC plug connector

Properties • Robust push-pull coupling mechanism • Compact design with 2 x 1.25mm ferrules • Highest outdoor installation safety

50 Ohm, 6 GHz, 200°C, ø5.4 mm, FEP jacket

Properties • Flexible microwave cable • Excellent peormance up to 6 GHz • 2 piece solderless connectors for easy assembly and reassembly in the field

COAXIAL CONNECTOR, MMPX, 50 Ohm, Right angle cable plug (male)

Properties • Excellent electrical peormance at smallest dimensions • Broadband electrical characteristics • Mechanically very robust • Fits a wide range of cable types

CMOS Clock Generator Driver

CMOS Clock Generator Driver The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three c

CMOS Clock Generator Driver

The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three counter and complete “Ready” s

CMOS Clock Generator Driver

The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three counter and complete “Ready” s

CMOS Clock Generator Driver

CMOS Clock Generator Driver The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three c

COAXIAL CONNECTOR, BNC, 50 Ohm, Straight cable plug (male)

Properties • Useful for frequently coupled and uncoupled connections • Available for 50 ohm and 75 ohm applications • Applicable in frequencies up to 4 GHz

COAXIAL CONNECTOR, QMA, 50 Ohm, Right angle cable plug (male)

Properties • Excellent electrical peormence • High packing density • Applicable in frequencies up to 18 GHz • Easy to mate - No torque or tooling required • Return loss optimized DC to 6 GHz

CMOS Bus Controller

The Intersil 82C88 is a high performance CMOS Bus Controller manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C88 provides the control and command timing signals for 80C86, 80C88, 8086, 8088, 8089, 80186, and 80188 based systems. The high output drive capability

CMOS Bus Controller

The Intersil 82C88 is a high performance CMOS Bus Controller manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C88 provides the control and command timing signals for 80C86, 80C88, 8086, 8088, 8089, 80186, and 80188 based systems. The high output drive capability

CMOS Bus Controller

The Intersil 82C88 is a high performance CMOS Bus Controller manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C88 provides the control and command timing signals for 80C86, 80C88, 8086, 8088, 8089, 80186, and 80188 based systems. The high output drive capability

COAXIAL CONNECTOR, 7/16, 50 Ohm, Straight cable plug (male)

Properties • Rugged connection for COM-Applications • For medium and high power connection • Applicable in frequencies up to 7.5 GHz • IEC Standardized

Cover for 19 inch break-out plate, grey

Properties • Robust steel construction • Fast and tool-less installation

COAXIAL CONNECTOR, 7/16, 50 Ohm, Straight cable jack (female)

Properties • Rugged connection for COM-Applications • For medium and high power connection • Applicable in frequencies up to 7.5 GHz • IEC Standardized

We are Dedicated to Achieving Customer Satisfaction Through Continuous Improvement

文件：2.45415 Mbytes Page：164 Pages

SIMM Series Input Modules

文件：2.68081 Mbytes Page：50 Pages

SIMM Series Input Modules

文件：2.68081 Mbytes Page：50 Pages

SIMM Series Input Modules

文件：2.68081 Mbytes Page：50 Pages