316L SS Pressure Sensor

文件：272.22 Kbytes Page：5 Pages

Stand-alone CAN-controller

GENERAL DESCRIPTION The PCA62C200; PCF82C200P (hereafter generically referred to as PCX82C200) is a highly integrated stand-alone controller for the controller area network (CAN) used within automotive and general industrial environments.

NEW ENHANCED AT DATA BOOK

[CHIPS]

NEW ENHANCED AT DATA BOOK

[CHIPS]

NEW ENHANCED AT DATA BOOK

[CHIPS]

NEW ENHANCED AT DATA BOOK

[CHIPS]

CMOS High Performance Programmable DMA Controller

Description The 82C237 is a modified version of the 82C37A. The 82C237 is fully software and pin for pin compatible with the 82C37A but provides an additional mode for 16-bit DMA transfers, as well as enhanced speed. Each channel may be individually programmed for 8-bit or 16-bit data transfers

CAN controller interface

GENERAL DESCRIPTION The PCA82C250 is the interface between the CAN protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. FEATURES • Fully compatible with the “ISO 11898” standard • Hi

CAN transceiver for 24 V systems

Clock Generator and Ready Interface for 80C286 Processors

Description The Intersil 82C284 is a clock generator/driver which provides clock signals for 80C286 processors and support components. It also contains logic to supply READY to the CPU from either asynchronous or synchronous sources and synchronous RESET from an asynchronous input with hysteresis

Clock Generator and Ready Interface for 80C286 Processors

Features • Generates System Clock for 80C286 Processors • Generates System Reset Output from Schmitt Trigger Input - Improved Hysteresis • Uses Crystal or External Signal for Frequency Source • Dynamically Switchable between Two Input Frequencies • Provides Local READY and MULTIBUS READY

Clock Generator and Ready Interface for 80C286 Processors

Description The Intersil 82C284/883 is a clock generator/driver which provides clock signals for 80C286 processors and support components. It also contains logic to supply READY to the CPU from either asynchronous or synchronous sources and synchronous RESET from an asynchronous input with hyster

Clock Generator and Ready Interface for 80C286 Processors

Description The Intersil 82C284/883 is a clock generator/driver which provides clock signals for 80C286 processors and support components. It also contains logic to supply READY to the CPU from either asynchronous or synchronous sources and synchronous RESET from an asynchronous input with hyster

Clock Generator and Ready Interface for 80C286 Processors

Description The Intersil 82C284/883 is a clock generator/driver which provides clock signals for 80C286 processors and support components. It also contains logic to supply READY to the CPU from either asynchronous or synchronous sources and synchronous RESET from an asynchronous input with hyster

BUS CONTROLLER FOR M80286 PROCESSORS

BUS CONTROLLER FOR M80286 PROCESSORS The Intel M82C288 Bus Controller is a 20-pin CHMOS III component for use in M80C286 microsystems. The M82C288 is fully compatible with its predecessor the HMOS M82288. The bus controller is fully static and supports a low power mode. The bus controller provide

PROGRAMMABLE DMA CONTROLLER

GENERAL DESCRIPTION The MSM82C37B-5RS/GS/VJS, DMA (Direct Memory Access) controller is capable of high speed data transfer without CPU intervention and is used as a peripheral device in microcomputer systems. The device features four independent programmable DMA channels. Due to the use of sili

CMOS High Performance Programmable DMA Controller

The 82C37A is an enhanced version of the industry standard 8237A Direct Memory Access (DMA) controller, fabricated using Intersil’s advanced 2 micron CMOS process. Pin compatible with NMOS designs, the 82C37A offers increased functionality, improved performance, and dramatically reduced power cons

CMOS High Performance Programmable DMA Controller

Description The 82C37A is an enhanced version of the industry standard 8237A Direct Memory Access (DMA) controller, fabricated using Harris’ advanced 2 micron CMOS process. Pin compatible with NMOS designs, the 82C37A offers increased functionality, improved performance, and dramatically reduced

CMOS High Performance Programmable DMA Controller

The 82C37A is an enhanced version of the industry standard 8237A Direct Memory Access (DMA) controller, fabricated using Intersil’s advanced 2 micron CMOS process. Pin compatible with NMOS designs, the 82C37A offers increased functionality, improved performance, and dramatically reduced power cons

CMOS Asynchronous Communications Element

The 82C50A Asynchronous Communication Element (ACE) is a high performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) on a single chip. Using Intersil’s advanced Scaled SAJI IV CMOS Process, the ACE will support data rates from DC to 625K baud (0-1

ETHERNET SERIAL INTERFACE

ETHERNET SERIAL INTERFACE The 82C501AD Ethernet Serial Interface (ESI) chip is designed to work directly with Intel LAN Controllers (82586, 82590, and 82596) in IEEE 802.3 (10BASE5 and 10BASE5), 10-Mb/s, Local Area Network applications. The major functions of the 82C501AD are to generate the 10-M

ETHERNET SERIAL INTERFACE

ETHERNET SERIAL INTERFACE The 82C501AD Ethernet Serial Interface (ESI) chip is designed to work directly with Intel LAN Controllers (82586, 82590, and 82596) in IEEE 802.3 (10BASE5 and 10BASE5), 10-Mb/s, Local Area Network applications. The major functions of the 82C501AD are to generate the 10-M

CMOS Asynchronous Communications Element

The 82C50A Asynchronous Communication Element (ACE) is a high performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) on a single chip. Using Intersil’s advanced Scaled SAJI IV CMOS Process, the ACE will support data rates from DC to 625K baud (0-1

CMOS Asynchronous

The 82C50A Asynchronous Communication Element (ACE) is a high performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) on a single chip. Using Intersil’s advanced Scaled SAJI IV CMOS Process, the ACE will support data rates from DC to 625K baud (0-1

CMOS Asynchronous

The 82C50A Asynchronous Communication Element (ACE) is a high performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) on a single chip. Using Intersil’s advanced Scaled SAJI IV CMOS Process, the ACE will support data rates from DC to 625K baud (0-1

CMOS Asynchronous

The 82C50A Asynchronous Communication Element (ACE) is a high performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) on a single chip. Using Intersil’s advanced Scaled SAJI IV CMOS Process, the ACE will support data rates from DC to 625K baud (0-1

UNIVERSAL SYNCHRONOUS ASYNCHRONOUS RECEIVER TRANSMITTER

GENERAL DESCRIPTION The MSM82C51A-2 is a USART (Universal Synchronous Asynchronous Receiver Transmitter) for serial data communication. As a peripheral device of a microcomputer system, the MSM82C51A-2 receives parallel data from the CPU and transmits serial data after conversion. This devic

CMOS Serial Controller Interface

The Intersil 82C52 is a high performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) on a single chip. Utilizing the Intersil advanced Scaled SAJI IV CMOS process, the 82C52 will support data rates up to 1M baud asynchronously with a 16X clock (16M

CMOS Serial Controller Interface

The Intersil 82C52 is a high performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) on a single chip. Utilizing the Intersil advanced Scaled SAJI IV CMOS process, the 82C52 will support data rates up to 1M baud asynchronously with a 16X clock (16M

CMOS Programmable Interval Timer

The Intersil 82C54 is a high performance CMOS Programmable Interval Timer manufactured using an advanced 2 micron CMOS process. The 82C54 has three independently programmable and functional 16-bit counters, each capable of handling clock input frequencies of up to 8MHz (82C54) or 10MHz (82C5

CHMOS PROGRAMMABLE INTERVAL TIMER

CHMOS PROGRAMMABLE INTERVAL TIMER

CMOS Programmable Interval Timer

The Intersil 82C54 is a high performance CMOS Programmable Interval Timer manufactured using an advanced 2 micron CMOS process. Features • 8MHz to 12MHz Clock Input Frequency • Compatible with NMOS 8254     - Enhanced Version of NMOS 8253 • Three Independent 16-Bit Counters • Six Programmabl

CMOS Programmable Peripheral Interface

Description The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 2

CHMOS PROGRAMMABLE PERIPHERAL INTERFACE

The Intel 82C55A is a high-performance, CHMOS version of the industry standard 8255A general purpose programmable I/O device which is designed for use with all Intel and most other microprocessors. It provides 24 I/O pins which may be individually programmed in 2 groups of 12 and used in 3 major m

Radiation Hardened CMOS Programmable Peripheral Interface

The Intersil HS-82C55ARH is a high performance, radiation hardened CMOS version of the industry standard 8255A and is manufactured using a hardened field, self-aligned silicon gate CMOS process. It is a general purpose programmable I/O device which may be used with many different microprocessors.

CMOS PROGRAMMABLE PERIPHERAL INTERFACE

GENERAL DESCRIPTION The MSM82C55A-2 is a programmable universal I/O interface device which operates as high speed and on low power consumption due to 3m silicon gate CMOS technology. It is the best fit as an I/O port in a system which employs the 8-bit parallel processing MSM80C85AH CPU. This

CMOS Programmable Peripheral Interface

Description The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 2

CMOS Programmable Peripheral Interface

Description The Harris 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24

CHMOS PROGRAMMABLE PERIPHERAL INTERFACE

The Intel 82C55A is a high-performance, CHMOS version of the industry standard 8255A general purpose programmable I/O device which is designed for use with all Intel and most other microprocessors. It provides 24 I/O pins which may be individually programmed in 2 groups of 12 and used in 3 major m

CMOS Programmable Peripheral Interface

The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24 I/O pi

CMOS Priority Interrupt Controller

The Intersil 82C59A is a high performance CMOS Priority Interrupt Controller manufactured using an advanced 2m CMOS process. The 82C59A is designed to relieve the system CPU from the task of polling in a multilevel priority system. The high speed and industry standard configuration of the 82

CMOS Priority Interrupt Controller

The Intersil 82C59A is a high performance CMOS Priority Interrupt Controller manufactured using an advanced 2µm CMOS process. The 82C59A is designed to relieve the system CPU from the task of polling in a multilevel priority system. The high speed and industry standard configuration of the 82C59A

CMOS Octal Latching Bus Driver

Description The Intersil 82C82 is a high performance CMOS Octal Latching Buffer manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C82 provides an eight-bit parallel latch/buffer in a 20 pin package. The active high strobe (STB) input allows transparent trans

CMOS Octal Latching Bus Driver

Features • Full Eight-Bit Parallel Latching Buffer • Bipolar 8282 Compatible • Three-State Noninverting Outputs • Propagation Delay . . . . . . . . . . . . . . . . . . . . . 35ns Max. • Gated Inputs: - Reduce Operating Power - Eliminate the Need for Pull-Up Resistors • Single 5V Power Supp

CMOS Octal Latching Inverting Bus Driver

Description The Intersil 82C83H is a high performance CMOS Octal Latching Buffer manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C83H provides an 8-bit parallel latch/buffer in a 20 lead pin package. The active high strobe (STB) input allows transparent transfe

CMOS Octal Latching Inverting Bus Driver

Description The Intersil 82C83H is a high performance CMOS Octal Latching Buffer manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C83H provides an 8-bit parallel latch/buffer in a 20 lead pin package. The active high strobe (STB) input allows transparent transfe

CMOS Clock Generator Driver

The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three counter and complete “Ready” s

CMOS Clock Generator Driver

The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three counter and complete “Ready” s

CMOS Clock Generator Driver

CMOS Clock Generator Driver The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three c

CMOS Static Clock Controller/Generator

Description The Intersil 82C85 Static CMOS Clock Controller/Generator provides complete control of static CMOS system operating modes and supports full speed, slow, stop-clock and stop-oscillator operation. While directly compatible with the Intersil 80C86 and 80C88 16-bit Static CMOS Microproc

CMOS Static Clock Controller/Generator

Features • Generates the System Clock For CMOS or NMOS Microprocessors and Peripherals • Complete Control Over System Operation for Very Low System Power - Stop-Oscillator - Low Frequency - Stop-Clock - Full Speed Operation • DC to 25MHz Operation (DC to 8MHz System Clock) • Generates 50

CMOS Octal Bus Transceiver

Description The Intersil 82C86H is a high performance CMOS Octal Transceiver manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C86H provides a full eight-bit bi-directional bus interface in a 20 lead package. The Transmit (T) control determines the data directi

CMOS Octal Bus Transceiver

Description The Intersil 82C86H is a high performance CMOS Octal Transceiver manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C86H provides a full eight-bit bi-directional bus interface in a 20 lead package. The Transmit (T) control determines the data directi

CMOS Octal Bus Transceiver

Features • Full Eight Bit Bi-Directional Bus Interface • Industry Standard 8286 Compatible Pinout • High Drive Capability - B Side IOL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20mA - A Side IOL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12mA • Three-State

CMOS Octal Inverting Bus Transceiver

Description The Intersil 82C87H is a high performance CMOS Octal Transceiver manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C87H provides a full eight-bit bi-directional bus interface in a 20 pin package. The Transmit (T) control determines the data direction.

CMOS Octal Inverting Bus Transceiver

Description The Intersil 82C87H is a high performance CMOS Octal Transceiver manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C87H provides a full eight-bit bi-directional bus interface in a 20 pin package. The Transmit (T) control determines the data direction.

CMOS Octal Inverting Bus Transceiver

Features • Full Eight Bit Bi-Directional Bus Interface • Industry Standard 8287 Compatible Pinout • High Drive Capability - B Side IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA - A Side IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12mA • Three-State

CMOS Bus Controller

The Intersil 82C88 is a high performance CMOS Bus Controller manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C88 provides the control and command timing signals for 80C86, 80C88, 8086, 8088, 8089, 80186, and 80188 based systems. The high output drive capability

CMOS Bus Controller

The Intersil 82C88 is a high performance CMOS Bus Controller manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The 82C88 provides the control and command timing signals for 80C86, 80C88, 8086, 8088, 8089, 80186, and 80188 based systems. The high output drive capability

CMOS Bus Arbiter

Description The Intersil 82C89 Bus Arbiter is manufactured using a self aligned silicon gate CMOS process (Scaled SAJI IV). This circuit, along with the 82C88 bus controller, provides full bus arbitration and control for multi-processor systems. The 82C89 is typically used in medium to large 80