丝印代码：820F3V33；OPTIREG™ linear TLS820F3ELV33 Low dropout linear voltage regulator with watchdog and reset

Features • Output voltage 3.3 V ±2 • Current capability 200 mA • Input voltage range from 3 V to 42 V • Stable with 1 μF ceramic output capacitor • Ultra low current consumption: typically 26 μA • Very low drop out voltage: typically 100 mV at 100 mA • Watchdog circuit for monitoring a micr

丝印代码：820F3V50；OPTIREG™ linear TLS820F3ELV50 Low dropout linear voltage regulator with watchdog and reset

Features • Output voltage 5 V ±2 • Current capability 200 mA • Input voltage range from 3 V to 42 V • Stable with 1 μF ceramic output capacitor • Ultra low current consumption: typically 26 μA • Very low drop out voltage: typically 100 mV at 100 mA • Watchdog circuit for monitoring a microp

丝印代码：820F1V50；Low Dropout Linear Voltage Regulator

文件：1.52933 Mbytes Page：36 Pages

N-CHANNEL Enhancement-Mode Silicon Gate TMOS

Power Field Effect Transistor N-Channel Enhancement-Mode Silicon Gate TMOS TMOS POWER FETs 2 and 2.5 AMPERES rDS(on) = 3 OHM 450 and 500 VOLTS rDS(on) = 4 OHM 450 VOLTS

8/16-bit Data Bus Flash Memory Card

DESCRIPTION The MF8XXX-GMCAVXX is a flash memory card which uses eight-megabit or sixteen megabit flash electrically erasable and programmable read only memory IC’s as common memory and a 64-kilobit electrically erasable and programmable read only memory as attribute memory. The MF8XXX-GNCAVXX i

JFET RF AMPLIFIER

JFET RF AMPLIFIER N-CHANNEL - DEPLETION

ULTRAFAST RECTIFIERS 8 AMPERES 200-400-600 VOLTS

. . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • Ultrafast 25, 50 and 75 Nanosecond Recovery Time • 175°C Operating Junction Temperature • Popular TO–220 Package • Epoxy Meets U

ULTRAFAST RECTIFIER 8 AMPERES 200 VOLTS

SWITCHMODE Power Rectifier Designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • Ultrafast 35 ns Recovery Times • 150°C Operating Junction Temperature • Epoxy Meets UL94, VO @ 1/8″ • High Temperature