Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-11-HI/24VDC is designed to operate HART® 2-wire transducers (III) and to transmit galvanically isolated signals. In addition to the analog signals, also the digital HART® communication signals can be transmitted bidirectionally. Alternatively, a

Analog signal isolator 2-channel

Normalized active voltage or current signals are transmitted galvanically isolated via the 2- channel analog signal isolator IM31-22-I. The device is equipped with two input circuits of 0/2…10 V or 0/4…20 mA and two short-circuit proof output circuits of 0/4…20 mA The transmission character

Analog signal isolator 1-channel

Normalized active voltage or current signals are transmitted galvanically isolated via the 1- channel analog signal isolator IM31-12-I. The signal is duplicated and provided at both outputs. The device is equipped with one input circuit of 0/2…10 V or 0/4…20 mA and two short-circuit proof out

Analog signal isolator 1-channel

Normalized active voltage or current signals are transmitted galvanically isolated via the 1- channel analog signal isolator IM31-11-I. The device is equipped with one input circuit of 0/2…10 V or 0/4…20 mA and one short-circuit proof output circuit of 0/4…20 mA. The transmission characteri

Isolating switching amplifier 2-channel

The IM1-22-R isolating switching amplifier is a 2-channel device. Sensors according to EN 60947-5-6 (NAMUR) or potential-free contact transmitters can be connected to the device. The output circuits feature 2 relays, each with 1 NO contact. Via six switches on the front, you can set the

Relay coupler 1-channel

The IM73-12-R/24VUC 1-channel relay coupler is particularly suitable for use as a coupling module for the safe galvanic isolation of binary signals. 2 synchronous controlled relays, each with 1 changeover contact are provided at the output. If applied in SIL-3 circuits, the following conditions

Isolating transducer 2-channel

The 2-channel HART® isolating transducer IM33-22-HI/24VDC is designed to operate HART® transducers In addition to the analog signals, also the digital HART® communication signals can be transmitted bidirectionally. Alternatively, active 2-wire HART® transmitters (II) and passive 3-wire H

Analog Signal Isolator 1-channel

The 1-channel IM35-11-HI/24VDC signal isolator is designed to transmit the normalized current signal galvanically isolated 1:1. In addition to the analog signal also digital HART® communication signals can be transmitted bidirectionally. Typical applications are for example, the control of I/P

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-12-HI/24VDC is designed to operate HART® 2-wire transducers (III) and to transmit galvanically isolated signals. In addition to the analog signals, also the digital HART® communication signals can be transmitted bidirectionally. Alternatively, a