Locking Devices

文件：3.83504 Mbytes Page：81 Pages

USB DIN Modules

Features and Benefits • USB interfaces for LON FT and TP- 1250 networks for any edge server, gateway, controller, or device, including SmartServer™ IoT • Compatible with IzoT™ Net Server, OpenLNS® Server, LNS® Server and OpenLDV applications • Works with IzoT Net and LNS compatible appl

USB DIN Modules

Features and Benefits • USB interfaces for LON FT and TP- 1250 networks for any edge server, gateway, controller, or device, including SmartServer™ IoT • Compatible with IzoT™ Net Server, OpenLNS® Server, LNS® Server and OpenLDV applications • Works with IzoT Net and LNS compatible appl

Analog signal isolator 1-channel

Normalized active voltage or current signals are transmitted galvanically isolated from the Ex area to the non-Ex area via the 1-channel analog signal isolator IM31-11EX-I. The device is equipped with one input circuit of 0/2…10 V or 0/4…20 mA and one short-circuit proof output circuit of 0/4

Analog signal isolator 1-channel

Normalized active voltage or current signals are transmitted galvanically isolated from the Ex area to the non-Ex area via the 1-channel analog signal isolator IM31-12EX-I. The signal is duplicated and provided at both outputs. The device is equipped with one input circuit of 0/2…10 V or 0/4

Analog signal isolator 2-channel

Normalized active voltage or current signals are transmitted galvanically isolated from the Ex area to the non-Ex area via the 2-channel analog signal isolator IM31-22EX-I. The device features two input circuits of 0/2… 10 V or 0/4…20 mA as well as two short-circuit proof output circuits of 0

Analog signal isolator 1-channel

Normalized active voltage or current signals are transmitted galvanically isolated via the 1- channel analog signal isolator IM31-11-I. The device is equipped with one input circuit of 0/2…10 V or 0/4…20 mA and one short-circuit proof output circuit of 0/4…20 mA. The transmission characteri

Analog signal isolator 1-channel

Normalized active voltage or current signals are transmitted galvanically isolated via the 1- channel analog signal isolator IM31-12-I. The signal is duplicated and provided at both outputs. The device is equipped with one input circuit of 0/2…10 V or 0/4…20 mA and two short-circuit proof out

Analog signal isolator 2-channel

Normalized active voltage or current signals are transmitted galvanically isolated via the 2- channel analog signal isolator IM31-22-I. The device is equipped with two input circuits of 0/2…10 V or 0/4…20 mA and two short-circuit proof output circuits of 0/4…20 mA The transmission character

Analog signal isolator 2-channel

Normalized active voltage or current signals are transmitted galvanically isolated from the Ex area to the non-Ex area via the 2-channel analog signal isolator IM31-12EX-U. The device is equipped with two input circuits of 0/2…10 V or 0/4…20 mA and two short-circuit proof output circuits of 0

Analog signal isolator 1-channel

Normalized active voltage or current signals are transmitted via the 1-channel analog signal isolator IM31-11EX-U. The device is equipped with one input circuit of 0/2…10 V or 0/4…20 mA and one short-circuit proof output circuit of 0/2…10 V. The transmission characteristic is adjusted via a

Isolating transducer for fire and smoke detectors 2-channel

The 1-channel isolating transducer for fire and smoke detectors IM33-FSD-EX/L is designed especially for connection of conventional fire and smoke detectors in the Ex-area. They are supplied with energy. Actuation of a smoke detector results in a current change and the according signal is tr

Isolating transducer 1-channel

■ Intrinsically safe input circuits EEx ia ■ Application area acc. to ATEX: II (1) GD ■ Power supply of 2-wire measuring transducers ■ Input circuit: 0/4…20 mA ■ Passive output circuit: 0/4…20 mA ■ Galvanic separation of input circuits, output circuits and power supply ■ Complete galvanic

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-11EX-HI/24VDC is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signal to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be t

Isolating transducer 2-channel

The 2-channel HART® isolating transducer IM33-22EX-HI/24VDC is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signals to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be

Inductive Sensor – With Analog Output

Features ■Threaded barrel, M18 x 1 ■Chrome-plated brass ■2‐wire, 14…30 VDC ■Analog output ■4…20 mA ■Cable connection ■ATEX category II 1 G, Ex-zone 0 ■ATEX category II 2 D, Ex-zone 21 Functional principle Inductive TURCK sensors with analog output accomplish simple control tasks. They p

Inductive Sensor – With Analog Output

Features ■M30 × 1.5 threaded tube ■Chrome-plated brass ■2‐wire, 14…30 VDC ■Analog output ■4…20 mA ■Cable connection ■ATEX category II 1 G, Ex-zone 0 ■ATEX category II 2 D, Ex-zone 21 Functional principle Inductive TURCK sensors with analog output accomplish simple control tasks. They pr

Inductive Sensor – With Analog Output and Extended Temperature Range

Features ■Threaded barrel, M18 x 1 ■Chrome-plated brass ■Analog+ ■Extended operating range ■Temperatures up to -40 °C ■2‐wire, 14…30 VDC ■Analog output ■4…20 mA ■Cable connection ■ATEX category II 1 G, Ex-zone 0 ■ATEX category II 2 D, Ex-zone 21 Functional principle Inductive TURCK se

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-12EX-HI is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signal to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be trans

Isolating transducer 2-channel

The 2-channel HART® isolating transducer IM33-22EX-HI is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signals to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be tran

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-12Ex-HI/24VDC is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signal to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be t

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-11-HI/24VDC is designed to operate HART® 2-wire transducers (III) and to transmit galvanically isolated signals. In addition to the analog signals, also the digital HART® communication signals can be transmitted bidirectionally. Alternatively, a

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-12-HI/24VDC is designed to operate HART® 2-wire transducers (III) and to transmit galvanically isolated signals. In addition to the analog signals, also the digital HART® communication signals can be transmitted bidirectionally. Alternatively, a

Analog Signal Isolator 2-channel

The 2-channel IM35-22EX-HI/24VDC signal isolator is designed to transmit the normalized current signal galvanically isolated 1:1 from the non-Ex area to the Ex-area. In addition to the analog signal, also digital HART® communication signals can be transmitted bidirectionally. Typical applicati

Analog Signal Isolator 1-channel

The 1-channel signal isolator IM35-11EX-HI/24VDC is designed to transmit the normalized current signal galvanically isolated 1:1 from the non-Ex area to the Ex-area. In addition to the analog signal, also digital HART® communication signals can be transmitted bidirectionally. Typical applica

Analog Signal Isolator 1-channel

The 1-channel signal isolator IM35-11EX-HI is designed to transmit the normalized current signal galvanically isolated 1:1 from the nonEx area to the Ex-area. In addition to the analog signal, also digital HART® communication signals can be transmitted bidirectionally. Typical applications ar

Analog Signal Isolator 2-channel

The 2-channel IM35-22EX-HI signal isolator is designed to transmit the normalized current signal galvanically isolated 1:1 from the nonEx area to the Ex-area. In addition to the analog signal, also digital HART® communication signals can be transmitted bidirectionally. Typical applications ar

Analog Signal Isolator 1-channel

The 1-channel IM35-11-HI/24VDC signal isolator is designed to transmit the normalized current signal galvanically isolated 1:1. In addition to the analog signal also digital HART® communication signals can be transmitted bidirectionally. Typical applications are for example, the control of I/P

Isolating transducer 2-channel

The 2-channel HART® isolating transducer IM33-22-HI/24VDC is designed to operate HART® transducers In addition to the analog signals, also the digital HART® communication signals can be transmitted bidirectionally. Alternatively, active 2-wire HART® transmitters (II) and passive 3-wire H

Temperature measuring amplifier 1-channel

The temperature measuring amplifier IM34-12EX-CRI/K63 is designed to evaluate the temperature-dependent changes of RTDs, thermocouples or low voltages and to output them as temperature-linear current signals between 0/4…20 mA. The special device K63 analyzes standard Pt100/NI100 RTDs acc. to

Temperature measuring amplifier 1-channel

The 1-channel Ex-area temperature measuring amplifier IM34-11EX-I is designed to evaluate the temperature-dependent changes of Ni100/Pt100 RTDs, thermocouples types B, E, J, K, L, N, R, S and T or low voltages in a range of -100…+160 mV and to output them as temperature-linear current signals

Temperature measuring amplifier 1-channel

The 1-channel Ex-area temperature measuring amplifier IM34-12EX-RI is designed to evaluate the temperature-dependent changes of Ni100/Pt100 RTDs, thermocouples types B, E, J, K, L, N, R, S and T or low voltages in a range of -100…+160 mV and to output them as temperature-linear current signal

Temperature measuring amplifier 1-channel

The 1-channel Ex-area temperature measuring amplifier IM34-12EX-CRI is designed to evaluate the temperature-dependent changes of Ni100/Pt100 RTDs, thermocouples types B, E, J, K, L, N, R, S and T or low voltages in a range of -160…+160 mV and to output them as temperature-linear current signa

Temperature measuring amplifier 1-channel

The 1-channel Ex-area temperature measuring amplifier IM34-11EX-CI is designed to evaluate the temperature-dependent changes of Ni100/Pt100 RTDs, thermocouples types B, E, J, K, L, N, R, S and T or low voltages in a range of -160…+160 mV and to output them as temperature-linear current signal

Temperature measuring amplifier 1-channel

The 1-channel Ex-area temperature measuring amplifier IM34-14Ex-CDRi is designed to evaluate the temperature-dependent changes of Ni100/Pt100 RTDs and thermocouples types B, E, J, K, L, N, R, S, T and to output them as temperature-linear current signals 0/4…20 mA. Furthermore, resistors, pote

Temperature Measuring Amplifier 1-channel

The 1-channel Ex-area temperature measuring amplifier IM34-11EX-CI/K51 is designed to evaluate the temperature-dependent changes of Ni100/Pt100 RTDs, thermocouples types B, E, J, K, L, N, R, S and T or low voltages in a range of -160…+160 mV and to output them as temperature-linear current si

Temperature measuring amplifier 1-channel

The 1-channel temperature measuring amplifier IM34-11Ex-CI/K60 is designed to evaluate the temperature-dependent changes of Ni100/Pt100 (RTD), thermocouples (TC) types B, E, J, K, L, N, R, S and T or low voltages in a range of -160…+160 mV and to output them as temperature-linear current signa

Temperature measuring amplifier 1-channel

The temperature measuring amplifier IM34-11Ex-Ci/24VDC is designed to evaluate the temperature-dependent changes of Ni100/ Pt100 RTDs, thermocouples types B, E, J, K, L, N, R, S and T or low voltages in a range of -160…+160 mV and to output them as temperature-linear current signals. The dev

Analog Signal Isolator 1-channel

■ Intrinsically safe input circuits EEx ia ■ Application area acc. to ATEX: II (1) GD ■ Input circuit: 0/2 …10 VDC ■ Output circuit: 0/2…10 VDC, intrinsically-safe ■ Galvanic separation of input circuits, output circuits and power supply

包装：盒 描述：U60 TP1250 网络解决方案 其它

包装：散装 描述：IZOT U60 FT DIN NETWORK INTERFAC 网络解决方案 其它

AMPLIMITE Subminiature D Connectors

文件：1.28572 Mbytes Page：32 Pages

SOLDERSLEEVE WIRE SPLICE

文件：89.77 Kbytes Page：1 Pages

Managed Industrial Ethernet Switch

文件：596.73 Kbytes Page：3 Pages

Managed Industrial Ethernet Switch

文件：596.73 Kbytes Page：3 Pages

Managed Industrial Ethernet Switch

文件：596.73 Kbytes Page：3 Pages

Common Mode Inductors/EMI Filters

文件：89.06 Kbytes Page：1 Pages

DC-DC CONVERTER BOOST(STEP-UP) VIN AS LOW AS 0.85V MICRO-POWER SYNC

DESCRIPTION The A7506 is synchronous, fixed frequency, step-up DC/DC converters delivering high efficiency in a SOT-26 package. Capable of supplying 3.3V at 100mA from a single AA cell input, the device contain an internal NMOS switch and PMOS synchronous rectifier. A switching frequency of 1.0

CMOS 8-and 16-Channel Analog Multiplexers

GENERAL DESCRIPTION The AD7506 is a monolithic CMOS 16-channel analog multiplexer packaged in a 28-pin DIP or a 28-terminal surface mount package.

CMOS 8- AND 16-CHANNEL ANALOG MULTIPLEXERS

GENERAL DESCRIPTION The AD7506 is a monolithic CMOS 16-channel analog multiplexer packaged in a 28-pin DIP or a 28-terminal surface mount package.