Isolating switching amplifier 2-channel

The 2-channel IM1-231EX-R isolating switching amplifier is equipped with intrinsically safe input circuits. Sensors according to EN 60947-5-6 (NAMUR) or potential-free contact transmitters can be connected to the device. The output circuits each feature a relay with a changeover contact. In

Isolating switching amplifier 4-channel

The 4-channel IM1-451EX-T isolating switching amplifier is equipped with intrinsically safe input circuits. Sensors according to EN 60947-5-6 (NAMUR) or potential-free contact transmitters can be connected to the device. The output circuits each feature a potential-free and short-circuit proo

Isolating switching amplifier 4-channel

The 4-channel IM1-451EX-R isolating switching amplifier is equipped with intrinsically safe input circuits. Sensors according to EN 60947-5-6 (NAMUR) or potential-free contact transmitters can be connected to the device. The output circuits each feature a relay with an NO contact. In additio

Potentiometer Amplifier 2-channel

The 2-channel potentiometer amplifier IM36-22EX-I is designed to transmit signals from 3/5-wire potentiometers galvanically isolated from the Ex area to the non-Ex area and to convert them into normalized 0/4…20 mA analog signals. Live-zero operation is activated for both channels through brid

Temperature measuring amplifier 1-channel

The 1-channel Ex-area temperature measuring amplifier IM34-14Ex-CDRi is designed to evaluate the temperature-dependent changes of Ni100/Pt100 RTDs and thermocouples types B, E, J, K, L, N, R, S, T and to output them as temperature-linear current signals 0/4…20 mA. Furthermore, resistors, pote

Analog Signal Isolator 2-channel

The 2-channel IM35-22EX-HI signal isolator is designed to transmit the normalized current signal galvanically isolated 1:1 from the nonEx area to the Ex-area. In addition to the analog signal, also digital HART® communication signals can be transmitted bidirectionally. Typical applications ar

Analog Signal Isolator 1-channel

The 1-channel signal isolator IM35-11EX-HI is designed to transmit the normalized current signal galvanically isolated 1:1 from the nonEx area to the Ex-area. In addition to the analog signal, also digital HART® communication signals can be transmitted bidirectionally. Typical applications ar

Isolating transducer 2-channel

The 2-channel HART® isolating transducer IM33-22EX-HI is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signals to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be tran

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-12EX-HI is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signal to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be trans

Rotation speed monitor 1-channel

The rotation speed monitor IM21-14EXCDTRI monitors frequencies, rotation speeds and pulse trains of rotating motor, gear or turbine parts according to over or undershoot of adjusted limit values. The current value is indicated on a display on the front of the device. Intrinsically safe sensors

Isolating transducer 1-channel

The 1-channel isolating transducer IM33-14EX-CDRI is designed to operate intrinsically safe transmitters in the Ex area and to transmit the measured signals to the nonEx area. The device is equipped with an analog output of 0/4…20 mA; In addition, three relay outputs for limit values are availa