Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

3.3V Octal transceiver with direction pin 3-State

DESCRIPTION The LVT245 is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

3.3 V octal transceiver with direction pin (3-state)

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external pu

低电压八路双向收发器，带 3 态输入/输出

LVT245和LVTH245包含八个具有3态输出的同相双向缓冲器，用于总线导向应用。 传输/接收(T/R#)输入决定数据在双向收发器中流动的方向。 发射（高电平有效）让数据从A端口流到B端口；接收（低电平有效）让数据从B端口流到A端口。 输出使能输入为高电平时，可通过将A和B端口置于高阻抗状态来停用它们。 LVTH245数据输入包含总线保持功能，无需外部上拉电阻即可保持未用的输入。 这些收发器设计用于低电压(3.3V) VCC应用，但也可向5V环境提供TTL接口。 LVT245和LVTH245采用先进的BiCMOS技术制造，可实现类似于5V ABT的高速运行，同时又能维持较低的CMOS功耗。 •系统在5V VCC时的输入和输出接口能力\n•总线保持数据输入无需外部上拉电阻即可保持未用的输入(74LVTH245)，另外还提供不含总线保持功能的配置(74LVT245)。\n•允许带电插/拔\n•上电/掉电高阻抗提供无干扰总线负载\n•输出供给/吸收， -32 mA/+64 mA\n•闩锁性能超过500 mA\n•静电放电(ESD)性能：人体模型> 2000V机械模型> 200V充电器件模型> 1000V;

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

文件：328.22 Kbytes Page：12 Pages

3.3V Octal transceiver with direction pin (3-State)

DESCRIPTION The LVT245B is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

3.3 V octal transceiver with direction pin (3-state)

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245B is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external p

Octal Buffer/Line Driver with 3 State Outputs

The 74LVT245BB is an octal transceiver designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (@/OE) pin can be used to disa •Supply Voltage Range from 1.65V to 3.6V\n•Sinks or Sources 24 ma at VCC = 3V\n•CMOS Low Power Consumption\n•OFF Supports Partial -Power Down Operation\n•Inputs or Outputs Accept up to 5.5V\n•Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage Applications\n•Schmitt Trigger Action at All I;

3.3 V OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS

Features  Supply Voltage Range from 2.7V to 3.6V  Outputs Sink 64mA or Source 32mA  CMOS Low Power Consumption  IOFF Supports Partial Power-Down Operation  Inputs or Outputs Accept Up to 5.5V  Inputs Include Bus-Hold – No Resistors on Unused Inputs.  Inputs can be Driven by 3.3V or 5

3.3 V octal transceiver with direction pin (3-state)

The 74LVT245B is a high-performance BiCMOS product designed for VCC operation at 3.3 V.\n This device is an octal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The control function implementation minimizes external timing requirements. The • 3-state buffers\n• Octal bidirectional bus interface\n• Input and output interface capability to systems at 5 V supply\n• TTL input and output switching levels\n• Output capability: +64 mA/-32 mA\n• Latch-up protection exceeds 500 mA per JEDEC Std 17\n• ESD protection:• HBM JESD22-A114E exceeds 20;

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245B is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external p

3.3 V octal transceiver with direction pin (3-state)

3.3 V OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS

Features  Supply Voltage Range from 2.7V to 3.6V  Outputs Sink 64mA or Source 32mA  CMOS Low Power Consumption  IOFF Supports Partial Power-Down Operation  Inputs or Outputs Accept Up to 5.5V  Inputs Include Bus-Hold – No Resistors on Unused Inputs.  Inputs can be Driven by 3.3V or 5

3.3 V OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS

Features  Supply Voltage Range from 2.7V to 3.6V  Outputs Sink 64mA or Source 32mA  CMOS Low Power Consumption  IOFF Supports Partial Power-Down Operation  Inputs or Outputs Accept Up to 5.5V  Inputs Include Bus-Hold – No Resistors on Unused Inputs.  Inputs can be Driven by 3.3V or 5

3.3V Octal transceiver with direction pin (3-State)

DESCRIPTION The LVT245B is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

3.3 V octal transceiver with direction pin (3-state)

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245B is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external p

3.3 V octal transceiver with direction pin (3-state)

3.3V Octal transceiver with direction pin (3-State)

DESCRIPTION The LVT245B is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

3.3V Octal transceiver with direction pin (3-State)

DESCRIPTION The LVT245B is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

3.3 V octal transceiver with direction pin (3-state)

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245B is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external p

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external pu

3.3 V octal transceiver with direction pin (3-state)

3.3 V octal transceiver with direction pin (3-state)

3.3V Octal transceiver with direction pin 3-State

DESCRIPTION The LVT245 is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external pu

3.3 V octal transceiver with direction pin (3-state)

3.3V Octal transceiver with direction pin 3-State

DESCRIPTION The LVT245 is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

3.3V Octal transceiver with direction pin 3-State

DESCRIPTION The LVT245 is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

3.3 V octal transceiver with direction pin (3-state)

3.3 V octal transceiver with direction pin; 3-state

1. General description The 74LVT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external pu

3.3V Octal transceiver with direction pin 3-State

DESCRIPTION The LVT245 is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bidirectional bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Bushold data inputs eliminate the need for externa

3.3 V octal transceiver with direction pin (3-state)

文件：111.57 Kbytes Page：15 Pages

封装/外壳：20-VFQFN 裸露焊盘 包装：卷带（TR） 描述：IC TXRX NON-INVERT 3.6V 20DFN 集成电路（IC） 缓冲器，驱动器，接收器，收发器

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC TXRX NON-INVERT 3.6V 20TSSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

文件：328.22 Kbytes Page：12 Pages

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

文件：328.22 Kbytes Page：12 Pages

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

文件：328.22 Kbytes Page：12 Pages

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

文件：328.22 Kbytes Page：12 Pages

3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

文件：111.03 Kbytes Page：7 Pages