Octal bus transceiver with direction pin with 5 V tolerant input/outputs (3-state)

DESCRIPTION The 74LVC245A/74LVCH245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. FEATURES • 5 V tolerant inputs/outputs for interfacing with 5 V logic • Wide supply voltage range from 1.2 to 3.6 V • CMOS low power

Octal bus transceiver; 3-state

Octal bus transceiver; 3-state

The 74LVC245A; 74LVCH245A are 8-bit transceivers featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features an output enable (OE) input for easy cascading and a send/receive (DIR) input for direction control. OE controls the outputs so that the bu • 5 V tolerant inputs/outputs for interfacing with 5 V logic\n• Wide supply voltage range from 1.2 V to 3.6 V\n• CMOS low-power consumption\n• Direct interface with TTL levels\n• Inputs accept voltages up to 5.5 V\n• High-impedance when VCC = 0 V\n• Bushold on all data inputs (74LVCH245A only)\n• Co;

封装/外壳：20-SSOP（0.209"，5.30mm 宽） 包装：管件 描述：IC TXRX NON-INVERT 3.6V 20SSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

封装/外壳：20-SSOP（0.209"，5.30mm 宽） 包装：管件 描述：IC TXRX NON-INVERT 3.6V 20SSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O AND BUS-HOLD

DESCRIPTION: The LVCH245A octal bus transceiver is built using advanced dual metal CMOS technology. The device is designed for asynchronous communication between data buses. Data is transmitted from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direc

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

文件：127.99 Kbytes Page：9 Pages

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

文件：127.99 Kbytes Page：9 Pages

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

文件：127.99 Kbytes Page：9 Pages

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

文件：127.99 Kbytes Page：9 Pages