Octal bus transceiver 3-State

DESCRIPTION The 74LV245 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT245. The 74LV245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. T FEATURES • Wide operating voltage: 1.0 to 5.5 V •

Octal bus transceiver; 3-state

1. General description The 74LV245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of cur

丝印代码：74LV245A；SN74LV245A Octal Bus Transceivers With 3-State Outputs

1 Features • 2-V to 5.5-V VCC operation • Maximum tpd of 6.5 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Support mixed-mode voltage operation on all ports • Ioff supports partial-

丝印代码：74LV245A；SN74LV245A Octal Bus Transceivers With 3-State Outputs

1 Features • 2-V to 5.5-V VCC operation • Maximum tpd of 6.5 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Support mixed-mode voltage operation on all ports • Ioff supports partial-

丝印代码：74LV245A；SN74LV245A Octal Bus Transceivers With 3-State Outputs

1 Features • 2-V to 5.5-V VCC operation • Maximum tpd of 6.5 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Support mixed-mode voltage operation on all ports • Ioff supports partial-

Octal bus transceiver; 3-state

1. General description The 74LV245A is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs are overvoltage tolerant. This feature allows t

Octal bus transceiver; 3-state

1. General description The 74LV245A is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs are overvoltage tolerant. This feature allows t

Octal bus transceiver; 3-state

The 74LV245AT is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on (OE) causes the outputs to assume a high-impedance OFF-state.\n The 74LV245AT is designed to operate over a VCC range from 4.5 V to 5.5 V. • Direct interface with TTL levels\n• Supply voltage range from 4.5 V to 5.5 V\n• Typical tpd of 3.1 ns at 5 V\n• Typical VOL(p)< 0.8 V at VCC = 5 V, Tamb = 25 °C\n• Typical VOH(v)< 0.8 V at VCC = 5 V, Tamb = 25 °C\n• Supports mixed-mode voltage operation on all ports\n• IOFF circuitry provides part;

Octal bus transceiver; 3-state

The 74LV245 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC245 and 74HCT245.\n The 74LV245 is an octal transceiver with non-inverting 3-state bus compatible outputs in both send and receive directions. A send/receive (DIR) input controls direction, and an output • Wide operating voltage: 1.0 V to 5.5 V\n• Optimized for low voltage applications: 1.0 V to 3.6 V\n• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V\n• Typical output ground bounce < 0.8 V at VCC = 3.3 V and Tamb = 25 °C\n• Typical HIGH-level output voltage (VOH) undershoot: > 2 V at V;

Octal bus transceiver; 3-state

1. General description The 74LV245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of cur

Octal bus transceiver 3-State

DESCRIPTION The 74LV245 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT245. The 74LV245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. T FEATURES • Wide operating voltage: 1.0 to 5.5 V •

Octal bus transceiver 3-State

DESCRIPTION The 74LV245 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT245. The 74LV245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. T FEATURES • Wide operating voltage: 1.0 to 5.5 V •

Octal bus transceiver; 3-state

The 74LV245 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC245 and 74HCT245.\n The 74LV245 is an octal transceiver with non-inverting 3-state bus compatible outputs in both send and receive directions. A send/receive (DIR) input controls direction, and an output • Wide operating voltage: 1.0 V to 5.5 V\n• Optimized for low voltage applications: 1.0 V to 3.6 V\n• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V\n• Typical output ground bounce < 0.8 V at VCC = 3.3 V and Tamb = 25 °C\n• Typical HIGH-level output voltage (VOH) undershoot: > 2 V at V;

Octal bus transceiver 3-State

DESCRIPTION The 74LV245 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT245. The 74LV245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. T FEATURES • Wide operating voltage: 1.0 to 5.5 V •

Octal bus transceiver 3-State

DESCRIPTION The 74LV245 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT245. The 74LV245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. T FEATURES • Wide operating voltage: 1.0 to 5.5 V •

Octal bus transceiver; 3-state

1. General description The 74LV245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of cur

Octal bus transceiver 3-State

DESCRIPTION The 74LV245 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT245. The 74LV245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. T FEATURES • Wide operating voltage: 1.0 to 5.5 V •

Octal bus transceiver; 3-state

文件：110.42 Kbytes Page：15 Pages

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

文件：472.04 Kbytes Page：19 Pages

Octal bus transceiver; 3-state

文件：734.76 Kbytes Page：13 Pages

Octal bus transceiver; 3-state

文件：734.76 Kbytes Page：13 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：管件 描述：IC TXRX NON-INVERT 5.5V 20TSSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC TXRX NON-INVERT 5.5V 20SO 集成电路（IC） 缓冲器，驱动器，接收器，收发器