1. General description

The 74LV245 is an 8-bit transceiver with 3-state outputs. The device features an output enable

(OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a

high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting

resistors to interface inputs to voltages in excess VCC.

2. Features and benefits

• Wide supply voltage range from 1.0 V to 5.5 V

• CMOS low power dissipation

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Optimized for low voltage applications: 1.0 V to 3.6 V

• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V

• Typical output ground bounce < 0.8 V at VCC = 3.3 V and Tamb = 25 °C

• Typical HIGH-level output voltage (VOH) undershoot: > 2 V at VCC = 3.3 V and Tamb = 25 °C

• Complies with JEDEC standards:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

• ESD protection:

• HBM JESD22-A114E exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C