8-bit serial-in/parallel-out shift register

DESCRIPTION The 74LV164 is a low-voltage Si-gate CMOS device and is pin and function compatible with the 74HC/HCT164. FEATURES • Wide operating voltage: 1.0 to 5.5V • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VO

8-bit serial-in/parallel-out shift register

1. General description The 74LV164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry thr

8-Bit Serial-In and Parallel-Out Shift Register

The 74LV164 is an 8-bit serial-in and parallel-out shift register which can accept a wide supply voltage range from 1.0V to 5.5V.\nThis device provides gated serial inputs (DSA and DSB) and parallel data outputs (Q0 to Q7). DSA and DSB support serial data entry, where either input can allow data to • Wide Operating Voltage Range: 1.0V to 5.5V\n\n• Inputs Accept Voltages Higher than the Supply Voltage\n\n• +12mA/-12mA Output Current\n\n• CMOS Low Power Consumption\n\n• Gated Serial Data Inputs\n\n• Asynchronous Master Reset Input\n\n• Outputs in High-Impedance State when VCC = 0V\n\n• -40℃ to +;

丝印代码：74LV164A；SN74LV164A 8-Bit Parallel-Out Serial Shift Registers

1 Features • VCC operation of 2 V to 5.5 V • Maximum tpd of 10.5 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Ioff supports live insertion, partial power-down mode, and back-driv

丝印代码：74LV164A；SN74LV164A 8-Bit Parallel-Out Serial Shift Registers

1 Features • VCC operation of 2 V to 5.5 V • Maximum tpd of 10.5 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Ioff supports live insertion, partial power-down mode, and back-drive

8-bit serial-in/parallel-out shift register

1. General description The 74LV164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry thr

8-bit serial-in/parallel-out shift register

General description The 74LV164-Q100 is a low-voltage, Si-gate CMOS device and is pin and function compatible with the 74HC164-Q100 and 74HCT164-Q100. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applica

8-bit serial-in/parallel-out shift register

The 74LV164-Q100 is a low-voltage, Si-gate CMOS device and is pin and function compatible with the 74HC164-Q100 and 74HCT164-Q100.\n The 74LV164-Q100 is an 8-bit edge-triggered shift register with serial data entry and an output from each of the eight stages. Data is entered serially through one • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40°C to +85°C and from -40°C to +125°C\n\n• Wide operating voltage: 1.0 V to 5.5V\n• Optimized for low-voltage applications: 1.0 V to 3.6 V\n• Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V\n• Typic;

8-bit serial-in/parallel-out shift register

The 74LV164 is a low-voltage, Si-gate CMOS device and is pin and function compatible with the 74HC164 and 74HCT164.\n The 74LV164 is an 8-bit edge-triggered shift register with serial data entry and an output from each of the eight stages. Data is entered serially through one of two inputs (DSA o • Wide operating voltage: 1.0 V to 5.5 V\n• Optimized for low-voltage applications: 1.0 V to 3.6 V\n• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V\n• Typical VOLP (output ground bounce): < 0.8 V at VCC = 3.3 V and Tamb = 25 °C\n• Typical VOHV (output VOH undershoot): > 2 V at VCC = 3;

8-bit serial-in/parallel-out shift register

1. General description The 74LV164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry thr

8-bit serial-in/parallel-out shift register

DESCRIPTION The 74LV164 is a low-voltage Si-gate CMOS device and is pin and function compatible with the 74HC/HCT164. FEATURES • Wide operating voltage: 1.0 to 5.5V • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VO

8-bit serial-in/parallel-out shift register

DESCRIPTION The 74LV164 is a low-voltage Si-gate CMOS device and is pin and function compatible with the 74HC/HCT164. FEATURES • Wide operating voltage: 1.0 to 5.5V • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VO

8-bit serial-in/parallel-out shift register

General description The 74LV164-Q100 is a low-voltage, Si-gate CMOS device and is pin and function compatible with the 74HC164-Q100 and 74HCT164-Q100. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applica

8-bit serial-in/parallel-out shift register

DESCRIPTION The 74LV164 is a low-voltage Si-gate CMOS device and is pin and function compatible with the 74HC/HCT164. FEATURES • Wide operating voltage: 1.0 to 5.5V • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VO

8-bit serial-in/parallel-out shift register

DESCRIPTION The 74LV164 is a low-voltage Si-gate CMOS device and is pin and function compatible with the 74HC/HCT164. FEATURES • Wide operating voltage: 1.0 to 5.5V • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VO

8-bit serial-in/parallel-out shift register

1. General description The 74LV164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry thr

8-bit serial-in/parallel-out shift register

DESCRIPTION The 74LV164 is a low-voltage Si-gate CMOS device and is pin and function compatible with the 74HC/HCT164. FEATURES • Wide operating voltage: 1.0 to 5.5V • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VO

8-bit serial-in/parallel-out shift register

General description The 74LV164-Q100 is a low-voltage, Si-gate CMOS device and is pin and function compatible with the 74HC164-Q100 and 74HCT164-Q100. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applica

8-bit serial-in/parallel-out shift register

General description The 74LV164-Q100 is a low-voltage, Si-gate CMOS device and is pin and function compatible with the 74HC164-Q100 and 74HCT164-Q100. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applica

8-bit serial-in/parallel-out shift register

文件：123.64 Kbytes Page：21 Pages

8-BIT PARALLEL-OUT SERIAL SHIFT REGISTERS

文件：755.62 Kbytes Page：19 Pages

8-Bit Parallel-Out Serial Shift Registers

文件：1.31966 Mbytes Page：30 Pages

封装/外壳：14-VFQFN 裸露焊盘 功能：串行至并行 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC SHIFT REGISTER 8BIT 14DHVQFN 集成电路（IC） 移位寄存器

封装/外壳：14-SOIC（0.154"，3.90mm 宽） 功能：串行至并行 包装：管件 描述：IC 8BIT SHIFT REGISTER 14SOIC 集成电路（IC） 移位寄存器