Octal 3-STATE Buffer/Line Driver/Line Receiver

General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed as memory-address drivers, clock driv ers, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data l

LOW POWER SCHOTTKY

The SN74LS240 and SN74LS244 are Octal Buffers and Line Drivers designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers which provide improved PC board density. • Hysteresis at Inputs to Improve Noise Margins • 3-State Outputs Drive Bus Lines

Octal Buffers/Line Drivers/Line Receivers(inverted three-state outputs)

● Quadrupie 2-Input Positive NAND Gates ● Quadruple 2-Input Positive NAND Gates (with Open Collector Output) (Continue....)

Octal 3-STATE Buffer/Line Driver/Line Receiver

General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed as memory-address drivers, clock drivers, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data

OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS

OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS The SN54/74LS240, 241 and 244 are Octal Buffers and Line Drivers designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers which provide improved PC board density. • Hysteresis at Inputs to Impro

Octal Buffers/Line Drivers/Line Receivers

Octal Buffers/Line Drivers/Line Receivers (non inverted three-state outputs)

Octal 3-STATE Buffer/Line Driver/Line Receiver

General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed as memory-address drivers, clock driv ers, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data l

Quadruple Bus Transceiver

General Description This four data line transceiver is designed for asynchronous two-way communications between data buses. It can be used to drive terminated lines down to 133Ω. Features ■ Two-way asynchronous communication between data buses ■ PNP inputs reduce DC loading on bus li

Octal Buffers/Line Drivers/Line Receivers(non inverted three-state outputs)

Octal Buffers/Line Drivers/Line Receivers (non inverted three-state outputs)

OCTAL BUFFER/LINE DRIVERS WITH 3-STATE OUTPUT(NONINVERTED)

Octal 3-STATE Buffer/Line Driver/Line Receiver

General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/drivers employed as memory-address drivers, clock drivers, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data line

LOW POWER SCHOTTKY

The SN74LS240 and SN74LS244 are Octal Buffers and Line Drivers designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers which provide improved PC board density. • Hysteresis at Inputs to Improve Noise Margins • 3-State Outputs Drive Bus Lines

Octal 3-STATE Buffer/Line Driver/Line Receiver

General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed as memory-address drivers, clock drivers, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data

3-STATE Octal Bus Transceiver

General Description These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control function implementation minimizes external timing requirements. The device allows data transmission from the A Bus to the B Bus or from the B Bus to the A Bus

Octal Bus Transceivers

The SN74LS245 is an Octal Bus Transmitter/Receiver designed for 8-line asynchronous 2-way data communication between data buses. Direction Input (DR) controls transmission of Data from bus A to bus B or bus B to bus A depending upon its logic level. The Enable input (E) can be used to isolate the

3-STATE Octal Bus Transceiver

General Description These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control function implementation minimizes external timing requirements. The device allows data transmission from the A Bus to the B Bus or from the B Bus to the A Bus depen

LOW POWER SCHOTTKY

The SN74LS247 is a BCD-to-Seven-Segment Decoder/Drivers. The LS247 composes the and with the tails. The LS247 has active-low outputs for direct drive of indicators. The LS247 features a lamp test input and have full ripple-blanking input/output controls. An automatic leading and/or trailing-edge z

8CD-to-Seven-Segment Decoders/Drivers(with 15V outputs)

8CD-to-Seven-Segment Decoders/Drivers(with 15V outputs)

BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS

The SN54/74LS247 thru SN54/74LS249 are BCD-to-Seven-Segment Decoder/Drivers. The LS247 and LS248 are functionally and electrically identical to the LS47 and LS48 with the same pinout configuration. The LS249 is a 16-pin version of the 14-pin LS49 and includes full functional capability for lamp te

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

文件：638.2 Kbytes Page：24 Pages

Octal TRI-STATE Buffers/Line Drivers/Line Receivers

文件：142.97 Kbytes Page：6 Pages

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

文件：247.97 Kbytes Page：16 Pages

Octal Buffers/Line Drivers/Line Receivers(inverted three-state outputs)

Octal TRI-STATE Buffers/Line Drivers/Line Receivers

文件：142.97 Kbytes Page：6 Pages

Octal Buffers/Line Drivers/Line Receivers

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

文件：638.2 Kbytes Page：24 Pages

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

文件：247.97 Kbytes Page：16 Pages

Quadruple Bus Transceiver

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

文件：638.2 Kbytes Page：24 Pages

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

文件：247.97 Kbytes Page：16 Pages

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

文件：564.82 Kbytes Page：18 Pages

TRI-STATE Octal Bus Transceiver

文件：139.95 Kbytes Page：6 Pages

Octal bus transceiver

文件：275.18 Kbytes Page：8 Pages

Octal bus transceiver

文件：275.18 Kbytes Page：8 Pages

Octal bus transceiver

文件：275.18 Kbytes Page：8 Pages

Octal bus transceiver

文件：275.18 Kbytes Page：8 Pages

BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS

文件：423.91 Kbytes Page：11 Pages

SCHMITT-TRIGGER POSITIVE-NAND GATES AND INVERTERS WITH TOTEM-POLE OUTPUTS

Functionally and Mechanically Identical to ‘L813, ‘LS14. and ‘LS132, Respectively Improved Line-Receiving Characteristics P-N-P Inputs Reduce System Loading Excellent Noise Immunity with Typical Hysteresis of 0.8 V description Each circuit functions as a NAND gate or inverter, but beca

SCHMITT-TRIGGER POSITIVE-NAND GATES AND INVERTERS WITH TOTEM-POLE OUTPUTS

文件：905.82 Kbytes Page：13 Pages

SCHMITT-TRIGGER POSITIVE-NAND GATES AND INVERTERS WITH TOTEM-POLE OUTPUTS

文件：185.81 Kbytes Page：6 Pages

SCHMITT-TRIGGER POSITIVE-NAND GATES AND INVERTERS WITH TOTEM-POLE OUTPUTS

文件：185.81 Kbytes Page：6 Pages

SCHMITT-TRIGGER POSITIVE-NAND GATES AND INVERTERS WITH TOTEM-POLE OUTPUTS

文件：905.82 Kbytes Page：13 Pages

Octal TRI-STATE Buffers/Line Drivers/Line Receivers

Octal 3-STATE Buffer/Line Driver/Line Receiver

Octal TRI-STATE Buffers/Line Drivers/Line Receivers

Ouadruple 2-input Positive NAND Gates

Octal Buffers/Line Drivers/Line Receivers(inverted three-state outputs)

Octal Buffers / Line Drivers / Line Receivers (inverted three-state outputs)

Octal Buffers / Line Drivers / Line Receivers (inverted three-state outputs)

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS