丝印代码：74HC132；Quad 2-input Schmitt NAND gate

Features • High-speed: tPD = 11 ns (typ.) at VCC = 6 V • Low power dissipation: ICC = 1 μA (max.) at TA = 25 °C • High noise immunity: VH(typ) = 0.9 V at VCC = 5 V • Symmetrical output impedance: |IOH| = IOL = 4 mA (min.) • Balanced propagation delays: tPLH ≅ tPHL • Wide operating volta

Quad 2-input NAND Schmitt trigger

1. General description The 74HC132; 74HCT132 is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals

Quad 2?묲nput NAND Gate with Schmitt?뭈rigger Inputs High?뭁erformance Silicon?묰ate CMOS

Quad 2−Input NAND Gate with Schmitt−Trigger Inputs High−Performance Silicon−Gate CMOS The 74HC132 is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132 can be used to enhance no

Quad 2-input NAND Schmitt trigger

GENERAL DESCRIPTION The 74HC/HCT132 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT132 contain four 2-input NAND gates which accept standard input signals. They are capable

High Speed CMOS Logic

Features High Speed: tPD = 11ns @ 5V (Typ.) Low Input Current: 1μA Output Drive Capability: 10 LSTTL loads Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with 74LS132.

High Speed CMOS Logic

文件：566.17 Kbytes Page：5 Pages

施密特触发输入的 4 通道、2输入、与非门

具有施密特触发输入的 4 通道、4 输入、与非门

丝印代码：74HC132D；CMOS Digital Integrated Circuits Silicon Monolithic

Functional Description • Quad 2-Input Schmitt NAND Gate General The 74HC132D is a high speed CMOS 2-INPUT NAND SCHMITT TRIGGER GATE fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation

丝印代码：74HC132Y；Quad 2-input Schmitt NAND gate

Features • High-speed: tPD = 11 ns (typ.) at VCC = 6 V • Low power dissipation: ICC = 1 μA (max.) at TA = 25 °C • High noise immunity: VH(typ) = 0.9 V at VCC = 5 V • Symmetrical output impedance: |IOH| = IOL = 4 mA (min.) • Balanced propagation delays: tPLH ≅ tPHL • Wide operating volta

High Speed CMOS Logic

Features High Speed: tPD = 11ns @ 5V (Typ.) Low Input Current: 1μA Output Drive Capability: 10 LSTTL loads Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with 74LS132.

Quad 2-input NAND Schmitt trigger

1. General description The 74HC132; 74HCT132 is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals

Quad 2-input NAND Schmitt trigger

The 74HC132-Q100; 74HCT132-Q100 is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals into sharply defin • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• Complies with JEDEC standard no. 7A\n• ESD protection:• MIL-STD-883, method 3015 exceeds 2000 V\n• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200;

Quad 2-input NAND Schmitt trigger

1. General description The 74HC132; 74HCT132 is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals

Quad 2-input NAND Schmitt trigger

GENERAL DESCRIPTION The 74HC/HCT132 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT132 contain four 2-input NAND gates which accept standard input signals. They are capable

Quad 2-input NAND Schmitt trigger

GENERAL DESCRIPTION The 74HC/HCT132 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT132 contain four 2-input NAND gates which accept standard input signals. They are capable

Quad 2?묲nput NAND Gate with Schmitt?뭈rigger Inputs High?뭁erformance Silicon?묰ate CMOS

Quad 2−Input NAND Gate with Schmitt−Trigger Inputs High−Performance Silicon−Gate CMOS The 74HC132 is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132 can be used to enhance no

Quad 2?묲nput NAND Gate with Schmitt?뭈rigger Inputs High?뭁erformance Silicon?묰ate CMOS

Quad 2−Input NAND Gate with Schmitt−Trigger Inputs High−Performance Silicon−Gate CMOS The 74HC132 is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132 can be used to enhance no

Quad 2-input NAND Schmitt trigger

GENERAL DESCRIPTION The 74HC/HCT132 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT132 contain four 2-input NAND gates which accept standard input signals. They are capable

Quad 2-input NAND Schmitt trigger

GENERAL DESCRIPTION The 74HC/HCT132 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT132 contain four 2-input NAND gates which accept standard input signals. They are capable

Quad 2-input NAND Schmitt trigger

1. General description The 74HC132; 74HCT132 is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals

Quad 2-input NAND Schmitt trigger

文件：248.53 Kbytes Page：19 Pages

封装/外壳：14-VFQFN 裸露焊盘 包装：卷带（TR） 描述：IC GATE NAND 4CH 2-INP 14DHVQFN 集成电路（IC） 门和反相器

封装/外壳：14-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC GATE NAND 4CH 2-INP 14SOIC 集成电路（IC） 门和反相器

Quad 2-input NAND Schmitt trigger

文件：248.53 Kbytes Page：19 Pages

Quad 2-input NAND Schmitt trigger

文件：248.53 Kbytes Page：19 Pages

Quad 2-input NAND Schmitt trigger

文件：248.53 Kbytes Page：19 Pages

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs High−Performance Silicon−Gate CMOS The MC74HC132A is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132A can be used to enhanc

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs High−Performance Silicon−Gate CMOS The MC74HC132A is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132A can be used to enhanc

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs High−Performance Silicon−Gate CMOS The MC74HC132A is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132A can be used to enhanc

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs High−Performance Silicon−Gate CMOS The MC74HC132A is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132A can be used to enhanc