Dual JK flip-flop with set and reset; negative-edge trigger

GENERAL DESCRIPTION The 74HC/HCT112 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Asynchronous set and reset • Output capability: standard • ICC category: flip

Dual JK flip-flop with set and reset; negative-edge trigger

1. General description The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate indepen

High Speed CMOS Logic

Features Output Drive Capability: 10 LSTTL Loads Bus Drive Capability: 15 LSTTL Loads Low Input Current: 1μA Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with 74LS112.

High Speed CMOS Logic

文件：683.61 Kbytes Page：6 Pages

High Speed CMOS Logic

Features Output Drive Capability: 10 LSTTL Loads Bus Drive Capability: 15 LSTTL Loads Low Input Current: 1μA Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with 74LS112.

Dual JK flip-flop with set and reset; negative-edge trigger

GENERAL DESCRIPTION The 74HC/HCT112 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Asynchronous set and reset • Output capability: standard • ICC category: flip

Dual JK flip-flop with set and reset; negative-edge trigger

1. General description The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate indepen

Dual JK flip-flop with set and reset; negative-edge trigger

GENERAL DESCRIPTION The 74HC/HCT112 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Asynchronous set and reset • Output capability: standard • ICC category: flip

J-K Type Flip-Flops

dual JK flip-flop with set and reset; negative-edge trigger - The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous act ·Input levels:·For 74HC112: CMOS level\n·For 74HCT112: TTL level;

Dual JK flip-flop with set and reset; negative-edge trigger

GENERAL DESCRIPTION The 74HC/HCT112 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Asynchronous set and reset • Output capability: standard • ICC category: flip

Dual JK flip-flop with set and reset; negative-edge trigger

1. General description The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate indepen

Dual JK flip-flop with set and reset; negative-edge trigger

GENERAL DESCRIPTION The 74HC/HCT112 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Asynchronous set and reset • Output capability: standard • ICC category: flip

Dual JK flip-flop with set and reset; negative-edge trigger

The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. T • Input levels:• For 74HC112: CMOS level\n• For 74HCT112: TTL level\n\n• Asynchronous set and reset\n• Specified in compliance with JEDEC standard no. 7A\n• ESD protection:• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V\n\n• Multiple package options\n• Specified from -40 °C to +8;

Dual JK flip-flop with set and reset; negative-edge trigger

The 74HC112-Q100; 74HCT112-Q100 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the cloc

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 功能：设置（预设）和复位 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC FF JK TYPE DUAL 1BIT 16SO 集成电路（IC） 触发器

封装/外壳：16-SSOP（0.209"，5.30mm 宽） 功能：设置（预设）和复位 包装：卷带（TR） 描述：IC FF JK TYPE DUAL 1BIT 16SSOP 集成电路（IC） 触发器

DUAL J-K FLIP FLOP WITH PRESET AND CLEAR

DESCRIPTION The M54HC112 is an high speed CMOS DUAL J-K FLIP-FLOP WITH PRESET AND CLEAR fabricated with silicon gate C2MOS technology. The M54HC112 dual JK flip-flop features individual J, K, clock, and asynchronous set and clear inputs for each flip-flop. When the clock goes high, the inputs ar