LED SPACER MOUNTS

UNIVERSAL” FOR T-1 & T-1 3/4 • Unique design separates leads and retains Tri-Lead and Bi-Lead components. • Designed for PC board mounting of Tri-Lead and Bi-Lead T-1 and T-13/4 LEDS • Provides height control, lead retention and stability. • Also suitable for mounting lamps, resistors, transis

LED SPACER MOUNTS

[KEYSTONE] “UNIVERSAL” FOR T-1 & T-1 3/4 • Unique design separates leads and retains Tri-Lead and Bi-Lead components. • Designed for PC board mounting of Tri-Lead and Bi-Lead T-1 and T-1 3/4 LEDS • Provides height control, lead retention and stability. • Also suitable for mounting lamps

LED SPACER MOUNTS

[KEYSTONE] “UNIVERSAL” FOR T-1 & T-1 3/4 • Unique design separates leads and retains Tri-Lead and Bi-Lead components. • Designed for PC board mounting of Tri-Lead and Bi-Lead T-1 and T-1 3/4 LEDS • Provides height control, lead retention and stability. • Also suitable for mounting lamps

LED SPACER MOUNTS

[KEYSTONE] “UNIVERSAL” FOR T-1 & T-1 3/4 • Unique design separates leads and retains Tri-Lead and Bi-Lead components. • Designed for PC board mounting of Tri-Lead and Bi-Lead T-1 and T-1 3/4 LEDS • Provides height control, lead retention and stability. • Also suitable for mounting lamps

This series of detectors can detect fixed voltages from 2.2V to 7V.

Low power consumption, typical value: 2.0uA Wide operating voltage range: 1.5V～12V Low temperature drift detection voltage: typical value ±50pp m/℃ Built-in hysteresis feature High-precision voltage value detection: ±3% Small package: SOT89-3, TO92, SOT23-3

Male Pins

文件：132.89 Kbytes Page：1 Pages

贴片电感

包装：袋 描述：LED HOLDER T1 3MM NYLON NATURAL 光电器件 LED - 垫片，支座

丝印代码：7030-2G；PROFET™ 2 12V Smart High-Side Power Switch

Basic Features • High-Side Switch with Diagnosis and Embedded Protection • Part of PROFET™ +2 12V Family • ReverseON for low power dissipation in Reverse Polarity • Switch ON capability while Inverse Current condition (InverseON) • Green Product (RoHS compliant) Protection Features • Abso

丝印代码：7030N；MicroPower, Unipolar Hall Effect Switch

GENERAL DESCRIPTION MA7030N is a three-terminal Hall Effect sensor device with an output driver, mainly designed for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The MA7030N is a unipolar Hall effect sensor IC. If a magnetic flux density larger than thres

丝印代码：7030S；MicroPower, Unipolar Hall Effect Switch

GENERAL DESCRIPTION MA7030S is a three-terminal Hall Effect sensor device with an output driver, mainly designed for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The MA7030S is a unipolar Hall effect sensor IC. If a magnetic flux density larger than thres

丝印代码：7030L；N-channel TrenchMOS logic level FET

丝印代码：7030-2A；PROFET??2 12V 2x 30 m廓 Smart High-Side Power Switch

文件：1.78448 Mbytes Page：62 Pages

丝印代码：7030L；N-channel TrenchMOS logic level FET

文件：89.05 Kbytes Page：12 Pages

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Climate control Room thermostats

Description - Room temperature controller with thermal feedback - Internal setting: Temperature cannot be set externally. Temperature is set inside the device at start-up - Integrated temperature reduction (approx. 4 K) possible via control with time switch - Suitable for all types of heatin

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

STANDARD RECOVERY DIODES Stud Version

STANDARD RECOVERY DIODES(250A, 300A) Features Alloy diode Peak reverse voltage up to 1000V Popular series for rough service Standard JEDEC types Stud cathode and stud anode version T ypical Applications Welders Power supplies Motor controls Battery chargers

丝印代码：GBYLL；30V 1.2A 1.4MHz Synchronous Step-Down Regulator

Features • Wide 4.5V to 30V Operating Input Range • 1.2A Continuous Output Current • 1.4MHz Switching Frequency • Short Protection with Hiccup-Mode • Built-in Over Current Limit • Built-in Over Voltage Protection • Force-PWM Mode • Internal Soft-Start • 200mΩ/150mΩ Low RDS(ON) Internal Po

丝印代码：HOYLL；Standoff 42V 1.2A 800KHz Sync Step-Down Regulator

Features • Wide 4V to 38V Operating Input Range • Standoff Voltage: 42V • 1.2A Continuous Output Current • 800KHz Switching Frequency • Short Protection with Foldback-Mode • Built-in Over Current Limit • Built-in Over Voltage Protection • Support PSM Mode • Internal Soft-Start • 250mΩ/15

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

HF Read/Write Head – For Bus Line Topology with TBEN-*

Features ■Rectangular, height 40 mm ■Active face on top ■Plastic, PBT-GF30-VO ■Device without end termination ■Device may only be operated in line topology TBEN-S*-2RFID-* or TBENL*-4RFID-* ■Max. 32 nodes per line or connection permitted ■Use a corresponding terminating resistor (see acc

HF Tag

Features ■3 different mounting options in/on metal, incl. accessories ■FRAM memory 2 kB ■For direct mounting on and in metal Functional principle The HF read/write devices operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on th

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/Write Head for Bus Line Topology with TBEN-*

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/Write Head for Bus Line Topology with TBEN-*

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/Write Head for Bus Line Topology with TBEN-*

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/Write Head for Bus Line Topology with TBEN-*

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

HF Tag

Features ■3 different mounting options in/on metal, incl. accessories ■FRAM memory 2 kB ■For direct mounting on and in metal Functional principle The HF read/write devices operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on th

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/Write Head for Bus Line Topology with TBEN-*

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

HF Read/Write Head – For Bus Line Topology with TBEN-*

Features ■Rectangular, height 40 mm ■Active face on top ■Plastic, PBT-GF30-VO ■Device without end termination ■Device may only be operated in line topology TBEN-S*-2RFID-* or TBENL*-4RFID-* ■Max. 32 nodes per line or connection permitted ■Use a corresponding terminating resistor (see acc

HF Tag

Features ■3 different mounting options in/on metal, incl. accessories ■EEPROM, memory 128 byte ■For direct mounting on and in metal Functional principle The HF read/write devices operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, dependin

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/Write Head for Bus Line Topology with TBEN-*

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

HF Read/Write Head – For Bus Line Topology with TBEN-*

Features ■Rectangular, height 40 mm ■Active face on top ■Plastic, PBT-GF30-VO ■Device without end termination ■Device may only be operated in line topology TBEN-S*-2RFID-* or TBENL*-4RFID-* ■Max. 32 nodes per line or connection permitted ■Use a corresponding terminating resistor (see acc

HF Tag

Features ■3 different mounting options in/on metal, incl. accessories ■EEPROM, memory 128 byte ■For direct mounting on and in metal Functional principle The HF read/write devices operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, dependin

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un