Dual Binding Posts with Base (raised base)

文件：128.32 Kbytes Page：1 Pages

Inline Block IO module for CANopen with 16 digital inputs and 16 digital outputs

文件：975.89 Kbytes Page：15 Pages

包装：散装 描述：CONN BIND POST DL FLUTD BLK/RED 连接器，互连器件 接线柱

包装：散装 描述：3M DIN PORT ADAPTER ASSEMB 1=1PC 工具 配件

excom I/O System Input Module, Temperature, 4-channel

The input module TI40Ex is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, Pt200, Pt500, Pt1000, Ni100 and CU100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

excom I/O System Input Module, Analog, Active, HART, 4-channel

The input module AIH40Ex is used for the connection of 2-wire transducers (active input = source mode / transducer passive). The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. The ignition protection type of the inputs is Ex ia IIC. The in

excom I/O System Output Module, Analog, HART, 4-channel

The output module AOH40Ex is used for the connection of intrinsically safe analog actuators such as control valves or process indicators. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. The explosion protection category of the outputs is E

excom I/O System Input Module, Analog, Passive, HART, 4-channel

The input module AIH41Ex is used for the connection of 4-wire transducers (passive input = sink mode / transducer active). The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. The ignition protection type of the inputs is Ex ia IIC. The input

excom I/O System I/O Module, Digital, 8-channel

The I/O module DM80Ex is used for the connection of NAMUR sensors (DIN EN 60 60947-5-6) and actuators. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). The module features pr

excom I/O System Input Module, Analog, Passive, 4-channel

The input module AI41Ex is used for the connection of 4-wire transducers (passive input = sink mode / transducer active). The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. The ignition protection type of the inputs is Ex ia IIC. The inpu

FOUNDATION fieldbus and PROFIBUS-PA Multibarrier, 4-channel

The four-channel multibarrier enables the connection of a large number of field devices to one fieldbus in the Ex area, according to IEC 61158-2. Each multibarrier can take 4 Ex i field devices. Up to 16 Ex i field devices can be connected to the bus. Ex e fieldbus supply (High Power Trunk C

FOUNDATION fieldbus and PROFIBUS-PA Multibarrier, 8-channel

The eight-channel multibarrier enables the connection of a large number of field devices to one fieldbus, according to IEC 61158-2. 8 Ex i field devices can be connected to each multibarrier. Up to 32 Ex i field devices can be connected to the bus. The number of nodes can be increased thanks

excom I/O System Module Rack for 8 Modules, Zone 2

The module rack MT08-3G consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 8 I/O modules. Up to 64 binary inputs/outputs or 32 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and unplugg

excom I/O System Module Rack for 16 Modules, Zone 2

The module rack MT16-3G consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 16 I/O modules. Up to 128 binary inputs/outputs or 64 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and unplu

Module Rack for 24 Modules, Zone 2 MT24-3G

The module rack MT24-3G consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 24 I/O modules. Up to 192 binary inputs/outputs or 96 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and unplu

Module Rack, Zone 1, for 8 Modules MT08-2G

The module rack MT08-2G consists of a backplane and the actual rack system. It can accommodate a gateway, a power supply unit as well as 8 I/O modules. Up to 64 binary inputs/outputs or 32 analog inputs/outputs resp. a mix of both can be connected to it. Unlike the MT16, neither gateways nor po

Module Rack, Zone 1, for 16 Modules MT16-2G

The MT16-2G module rack consists of a backplane, two PS-F24Ex mains filters and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 16 I/O modules. Up to 128 binary inputs/outputs or 64 analog inputs/outputs resp. a mix of both can be connected to it. Two PS-F

Module Rack, Zone 1, for 16 Modules, Marine Ship Approved MT16-2G/MSA

The module rack MT16-2G/MSA consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 16 I/O modules. Up to 128 binary inputs/outputs or 64 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and

excom I/O System Dummy Module

■ Dummy module for unused slots on the module rack

Module Rack, Zone 1, for 8 Modules MT08-2G

The module rack MT08-2G consists of a backplane and the actual rack system. It can accommodate a gateway, a power supply unit as well as 8 I/O modules. Up to 64 binary inputs/outputs or 32 analog inputs/outputs resp. a mix of both can be connected to it. Unlike the MT16, neither gateways nor po

Module Rack, Zone 1, for 16 Modules MT16-2G

The MT16-2G module rack consists of a backplane, two PS-F24Ex mains filters and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 16 I/O modules. Up to 128 binary inputs/outputs or 64 analog inputs/outputs resp. a mix of both can be connected to it. Two PS-F

Module Rack, Zone 1, for 16 Modules, Marine Ship Approved MT16-2G/MSA

The module rack MT16-2G/MSA consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 16 I/O modules. Up to 128 binary inputs/outputs or 64 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and

excom I/O System Cover for the Unused Power Port

■ Closure cap for the redundant power supply port

excom I/O System Frequency Meter, 2-channel

The input module DF20EX is equipped with 8 channels according to NAMUR which are split into two blocks. There is one frequency input per block and three control inputs/outputs. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom. When connecti

excom I/O System Modex Filter

■ Capacitor to improve the power-up performance/operational safety

Compact power supply module in IP67 24 VDC output voltage - 2 A output current

■ Broad temperature range ■ Status LED

Compact power supply module in IP67 24 VDC output voltage - 3.8 A output current

■ Broad temperature range ■ Status LED

Compact power supply module in IP67 24 VDC output voltage - 8 A output current

■ Broad temperature range ■ Status LED

Compact power supply module in IP67 24 VDC output voltage - 2 x 3.8 A output current

■ Broad temperature range ■ Status LED

excom I/O System Relay Module, 6-channel

The relay module DO60R-N is used for the connection of non-intrinsically safe actuators such as valves or indicator lights. The outputs are designed as zero-potential relay contacts. ■ 2 x changeover contacts (channel 1 and 2) ■ 4 x NO contacts (channel 3 to 6) The channels 3/4 and 5/6 are s

excom I/O System Output Module, Digital, 4-channel

The output module DO401Ex is used for the connection of intrinsically safe actuators such as valves or indicator lights. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom®. Explosion protection category is Ex ia IIC. The outputs are galvani

excom I/O System Input Module, Analog, 4-channel

The input module AI401Ex is used for the connection of 2-wire transducers (active input = source mode / transducer passive) or 4- wire transducers (passive input = sink mode / transducer active). The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with

excom I/O System Output Module, Analog, 4-channel

The output module AO401Ex is used for the connection of intrinsically safe analog actuators such as control valves or process indicators. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with the excom system. The explosion protection category of the o

excom I/O System Input Module, Temperature, 4-channel

The input module TI40Ex is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, Pt200, Pt500, Pt1000, Ni100 and CU100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

excom I/O System Input Module, Temperature, 4-channel

The input module TI40-N is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, PT200, Pt500, Pt1000, Ni100 and CU100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

excom I/O System 4-Channel Temperature Input Module

The input module TI401EX is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, Pt200, Pt500, Pt1000, Ni100 and Cu100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement

excom I/O System 4-Channel Temperature Input Module

The input module TI401-N is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, Pt200, Pt500, Pt1000, Ni100 and Cu100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

excom I/O System I/O Module, Digital, 8-channel

The I/O module DM80-N is used for the connection of NAMUR sensors (DIN EN 60 60947-5-6) and actuators. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). When connecting the fie

excom I/O System Frequency Meter, 2-channel

The input module DF20-N is equipped with 8 channels acc. to NAMUR, which are grouped together in two blocks. There is one frequency input per block and three control inputs/outputs. The module can be used as a counter or frequency input module: It is thus suited for pulse counting of binary in

excom I/O System Input Module, Digital, 4-channel

The input module DI40-N is used for the connection of NAMUR sensors (DIN EN 60947-5-6), 3-wire sensors (NPN, PNP) or mechanical contacts. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident

excom I/O System Output Module, Digital, 4-channel

The output module DO40-N is used for the connection of low-power actuators such as valves or indicator lights. The outputs of this module are galvanically isolated from each other. One actuator per channel can be connected. Via selection of connecting terminals, two circuits per channel are

excom I/O System Input Module, Analog, 4-channel

The input module AI40-N is used for the connection of 2-wire transducers (active input = source mode / transducer passive) or 4- wire transducers (passive input = sink mode / transducer active). The field circuits are galvanically isolated from each other. HART-compatible transducers can b

excom I/O System Input Module, Analog, Passive, 4-channel

The input module AI41-N is used for the connection of 4-wire transducers (passive input = sink mode / transducer active). The inputs are galvanically isolated from each The resolution is 14 bit, i.e. the analog value between 0…21 mA is represented as a number between 0 and 16383. For clear r

excom I/O System Potentiometer Module, 4-channel

The analog input module AI43-N is used for the connection of potentiometers in 3 or 4- wire technology. If 3-wire potentiometers are used, the terminals at the module rack have to be bridged. Resistance measurements, i.e. the evaluation of potentiometers with a 2-wire connection, is not poss

excom I/O System Output Module, Analog, 4-channel

The output module AO40-N is used for the connection of analog actuators such as control valves or process indicators. The outputs are galvanically isolated from each other. HART-compatible transducers can be connected to the module. The field device can thus be parametrized directly at the

excom I/O System Input Module, Analog, Active, HART, 4-channel

The input module AIH40-N is used for the connection of 2-wire transducers (active input = source mode / transducer passive). The inputs are not galvanically isolated from each other. When connecting the field devices, care has to be taken that all outputs are on the same potential. HART-comp

excom I/O System Output Module, Analog, HART, 4-channel

The output module AOH40-N is used for the connection of analog actuators such as control valves or process indicators. The outputs are not galvanically isolated from each other. When connecting the field devices, care has to be taken that all outputs are on the same potential. HART-compatible

excom I/O System Input Module, Temperature, 4-channel

The input module TI40-N is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, PT200, Pt500, Pt1000, Ni100 and CU100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

excom I/O System Input Module, Temperature, 4-channel

The input module TI41-N is used for the connection of the 2, 3 and 4-wire temperature probes Pt100, Ni100, Cu50 and Cu100. Line compensation of 2-wire temperature resistors is done by means of parametrized resistance values. These values have to be determined first through measurements. The a

Module Rack, Non-Ex, for 24 Modules MT24-N

The module rack MT24-3G consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 24 I/O modules. Up to 192 binary inputs/outputs or 96 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and unplu

Module Rack, Non-Ex, for 16 Modules MT16-N

The module rack MT16-N consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 16 I/O modules. Up to 128 binary inputs/outputs or 64 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and unplug

Module rack, non-Ex, for 8 modules MT08-N

The module rack MT08-N consists of a backplane and the actual rack system. It can accommodate 2 gateways, 2 power supply units as well as 8 I/O modules. Up to 64 binary inputs/outputs or 32 analog inputs/outputs resp. a mix of both can be connected to it. All modules can be plugged and unplugge

excom I/O System Dummy Module

■ Dummy module for unused slots on the module rack

excom I/O System Input Module, Digital, 4-channel

The input module DI401-EX is used for the connection of NAMUR sensors (DIN EN 60947-5-6) or mechanical contacts. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). The modul

Compact power supply module in IP67 24 VDC output voltage - 8 A output current

■ Broad temperature range ■ Status LED

Compact power supply module in IP67 24 VDC output voltage - 3.8 A output current

■ Broad temperature range ■ Status LED

excom I/O System Input Module, Analog, HART, 4-channe

The input module AIH401Ex is used for connection of active and/or passive 2-wire measuring transducer. The module is functionally compatible with the input modules AIH40Ex and AIH41Ex. In addition, the inputs are galvanically isolated. For initial configurations, configuration and parameteriza

excom I/O System Output Module, Analog, HART, 4-channel

The output module AOH401Ex is designed for the connection of analog actuators such as control valves or process indicators. The module is functionally compatible with input modules AO40Ex and AOH40EX. In addition, the outputs are galvanically isolated from each other. The analog value of 0…21

excom I/O System Input Module, Analog, HART, 4-channel

The input module AIH401-N is used for connection of active and/or passive 2-wire measuring transducer. The module is functionally compatible with the input modules AIH40-N and N-AIH41. In addition, the inputs are galvanically isolated. Configuration and parameterization are performed only by th

excom I/O System Output Module, Analog, HART, 4-channel

The output module AOH401-N is designed for the connection of analog actuators such as control valves or process indicators. The module is functionally compatible with the input modules AO40-N and AOH40-N. In addition, the inputs are galvanically isolated. The analog value of 0…21 mA is digitz