HIGH VOLTAGE CAPACITORS MONOLITHIC CERAMIC TYPE

10W - 33KV SINGLEOUTPUT DC / DC INDUSTRIAL

Features • 0 to 100 adjustability. • Voltage programmable. • Voltage monitor. • Remote on/off control. • EMI/RFI shielding. • Short circuit, reverse polarity protection. • Arc protection.

Adafruit NeoTrellis M4 with Enclosure and Buttons Kit Pack

文件：1.95471 Mbytes Page：4 Pages

DC Response, Silicon MEMS

文件：156 Kbytes Page：3 Pages

EPDM Snap-In Liquid Tight Bushings

文件：95.85 Kbytes Page：1 Pages

包装：零售封装 描述：ADAFRUIT NEOTRELLIS M4 WITH ENCL 创客/DIY，教育 教学套件

包装：散装 描述：HANDLE FOOT BLACK 7/8\ 盒子，外壳，机架 手柄

贴片电感

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200S；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Input Voltage Range 5.5 V to 52 V • Output Voltage (700 mV to 87% VIN) • 200-mA Internal P-Channel FET Driver • Voltage Feed-Forward Compensation • Undervoltage Lockout • Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation • Programmable Short-Circuit Protection • H

丝印代码：40200M；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Input Voltage Range 4.5 V t

丝印代码：40200M；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Input Voltage Range 4.5 V t

丝印代码：40200M；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Input Voltage Range 4.5 V t

丝印代码：40200M；WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER

1FEATURES • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Input Voltage Range 4.5 V t

Inductive Sensor

Features ■Threaded barrel, M30 x 1.5 ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field

Inductive Sensor

Features ■Threaded barrel, M30 x 1.5 ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT0 ■

Vitreous Enamelled Wirewound Resistors

• CECC approved • Suitable for harsh environments • Impervious lead free vitreous enamel coating • Overload characteristics ideal for protection circuits • stability and reliability • High power dissipation for size

Inductive Sensor

Features ■Threaded barrel, M30 x 1.5 ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field

Inductive Sensor

Features ■Threaded barrel, M30 x 1.5 ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field

Inductive Sensor

Features ■M30 × 1.5 threaded tube ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 male connector ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT0

Inductive Sensor

Features ■M30 × 1.5 threaded tube ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 male connector ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT0

Inductive Sensor

Features ■M30 × 1.5 threaded tube ■Stainless steel, 1.4301 ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 male connector ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with

Inductive Sensor

Features ■M30 × 1.5 threaded tube ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 male connector ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT0

WE-PCM Phase Change Material

General Information: Operating Temperature -40 up to +130 °C Storage Conditions (in original packaging)

Inductive Sensor

Features ■M30 × 1.5 threaded tube ■Chrome-plated brass ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 male connector ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT0

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

105/205 In-Line Saddle Weld Diaphragm Seal

FEATURES „ 316L stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Weld-in design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

106/206 In-Line Flanged Diaphragm Seals

FEATURES „ 316L Stainless steel top housing (standard) „ Available with diaphragm welded or bonded to top housing or removable threaded capsule diaphragms „ Flow through design reduces the possibility of clogging „ Large 21/2˝ diaphragm compatible with most Ashcroft instrumentation

Ultra-High-Gain Wide-Band Amplifier Array

Ultra-High-Gain Wide-Band Amplifier Array