Ultra-compact dual SCALE driver for IGBTs with blocking voltages up to 1200V

文件：62.74 Kbytes Page：1 Pages

Ultra-compact dual SCALE driver for IGBTs with blocking voltages up to 1200V

2SD106AI Dual SCALE Driver Core

Description The SCALE drivers from CONCEPT are based on a chip set that was developed specifically for the reliable driving and safe operation of IGBTs and power MOSFETs. The name “SCALE” is an acronym for the most outstanding properties of the SCALE series of drivers: SCALE = Scaleable,

双通道SCALE™-1驱动核

2SD106AI双通道SCALE-1驱动核用于1700 V以下的IGBT。可提供±6 A的门极电流，专为50 A到200 A的IGBT而优化。该驱动器可实现两个驱动通道的控制部分与功率部分之间的电气隔离。门极电压为±15 V。每个通道都具有可设定Vce检测阈值的功能，可提供短路和过流保护。该驱动器配备CONCEPT先进的SCALE-1驱动器芯片组，可使用两种模式运行：两个通道独立操作的直接模式，或具有内部死区生成功能的半桥模式。集成的隔离DC/DC电源为每个通道提供1 W的驱动功率。可靠性自从1999年以来，SCALE-1驱动器已经奠定了行业标准，2SD106AI在无数工业和铁路应用中得到验证 • 适用于1700V以内的IGBT\n• 接口可识别5V...15V的逻辑电平\n• 信号输入端具备施密特特性\n• 短路和过流保护功能\n• 电源欠压保护功能\n• 隔离的DC/DC电源\n• 信号通过变压器隔离\n• 隔离的状态反馈\n• 性能可靠，工作寿命长;

双通道SCALE™-1驱动核

2SD106AI双通道SCALE-1驱动核用于1700 V以下的IGBT。可提供±6 A的门极电流，专为50 A到200 A的IGBT而优化。该驱动器可实现两个驱动通道的控制部分与功率部分之间的电气隔离。门极电压为±15 V。每个通道都具有可设定Vce检测阈值的功能，可提供短路和过流保护。该驱动器配备CONCEPT先进的SCALE-1驱动器芯片组，可使用两种模式运行：两个通道独立操作的直接模式，或具有内部死区生成功能的半桥模式。集成的隔离DC/DC电源为每个通道提供1 W的驱动功率。可靠性自从1999年以来，SCALE-1驱动器已经奠定了行业标准，2SD106AI在无数工业和铁路应用中得到验证 • 适用于1700V以内的IGBT\n• 接口可识别5V...15V的逻辑电平\n• 信号输入端具备施密特特性\n• 短路和过流保护功能\n• 电源欠压保护功能\n• 隔离的DC/DC电源\n• 信号通过变压器隔离\n• 隔离的状态反馈\n• 性能可靠，工作寿命长;

2SD106AI Dual SCALE Driver Core for IGBTs and Power MOSFETs

文件：210.16 Kbytes Page：12 Pages

封装/外壳：模块 包装：管件 描述：IC GATE DRVR HALF-BRIDGE MODULE 集成电路（IC） 栅极驱动器

包装：管件 描述：MODULE GATE DRIVER 分立半导体产品 功率驱动器模块

Low-Voltage Dual-Supply 6-Bit Voltage Translator

Low-Voltage Dual-Supply 6-Bit Voltage Translator with Auto-Direction Sensing General Description The FXL2SD106 is a configurable dual-voltage-supply translator designed for both uni-directional and bidirectional voltage translation between two logic levels. The device allows translation between

Low Voltage Dual Supply 6-Bit SD Interface Voltage Translator with Configurable Voltage Supplies

General Description The FXL2SD106 is a configurable dual-voltage-supply translator designed for both uni-directional and bidirectional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level,

Low Voltage Dual Supply 6-Bit SD Interface Voltage Translator with Configurable Voltage Supplies

General Description The FXL2SD106 is a configurable dual-voltage-supply translator designed for both uni-directional and bidirectional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level,