4 Mbit 512Kb x8, Uniform Block Low Voltage Single Supply Flash Memory

SUMMARY DESCRIPTION The M29W040B is a 4 Mbit (512Kb x8) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage (2.7 to 3.6V) supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM

4 Mbit 512Kb x8, Uniform Block Low Voltage Single Supply Flash Memory

DESCRIPTION The M29W040 is a non-volatile memory that may be erased electrically at the block level, and programmed Byte-by-Byte. The interface is directly compatible with most microprocessors. PLCC32, TSOP32(8 x 20mm)and TSOP32 (8 x 14mm) packages are available. Both normal and reverse pin outs

4 Mbit 512Kb x8 / Uniform Block Low Voltage Single Supply Flash Memory

4 Mbit 512Kb x8, Uniform Block Low Voltage Single Supply Flash Memory

DESCRIPTION The M29W040 is a non-volatile memory that may be erased electrically at the block level, and programmed Byte-by-Byte. The interface is directly compatible with most microprocessors. PLCC32, TSOP32(8 x 20mm)and TSOP32 (8 x 14mm) packages are available. Both normal and reverse pin outs

4 Mbit 512Kb x8, Uniform Block Low Voltage Single Supply Flash Memory

SUMMARY DESCRIPTION The M29W040B is a 4 Mbit (512Kb x8) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage (2.7 to 3.6V) supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM

512K x 8 bit NAND Flash Memory

文件：359.51 Kbytes Page：22 Pages