丝印代码：2909；BIPOLAR ANALOG INTEGRATED CIRCUIT

FEATURES • Output current in excess of 1.0 A • Low dropout voltage VDIF = 0.7 V TYP. (IO = 1 A) • On-chip over-current and thermal protection circuit • On-chip output transistor safe operating area protection circuit

丝印代码：2909；BIPOLAR ANALOG INTEGRATED CIRCUIT

FEATURES • Output current in excess of 1.0 A • Low dropout voltage VDIF = 0.7 V TYP. (IO = 1 A) • On-chip over-current and thermal protection circuit • On-chip output transistor safe operating area protection circuit

丝印代码：2909；BIPOLAR ANALOG INTEGRATED CIRCUIT

FEATURES • Output current in excess of 1.0 A • Low dropout voltage VDIF = 0.7 V TYP. (IO = 1 A) • On-chip over-current and thermal protection circuit • On-chip output transistor safe operating area protection circuit

65 MHz Center Frequency

文件：40.01 Kbytes Page：2 Pages

USB 2.0 and Ethernet Hub - 3 USB Ports and 1 Ethernet

文件：160.01 Kbytes Page：3 Pages

Open/Closed Bushings

文件：128.11 Kbytes Page：1 Pages

包装：盒 描述：USB 2.0 AND ETHERNET HUB - 3 USB 计算机设备 USB 集线器

包装：盒 描述：USB 2.0 AND ETHERNET HUB - 3 USB 计算机设备 USB 集线器

ME 22,5 UT BK - Mounting base housing

DIN rail housing, Lower housing part with metal foot catch, tall design, with vents, width: 22.6 mm, height: 99 mm, depth: 107.3 mm, color: black (similar RAL 9005), cross connection: without bus connector, number of positions cross connector: not relevant

REL-OR3/LDP-125DC/3X21 - 单个继电器

插拔式八进制继电器，带电源触点，3个切换触点，测试按钮，续流二极管，机械开关位置显示，极性：A1+、A2-，输入电压：125 V DC

REL-OR3/LDP-12DC/3X21 - 单个继电器

插拔式八进制继电器，带电源触点，3个切换触点，测试按钮，续流二极管，机械开关位置显示，极性：A1+、A2-，输入电压：12 V DC

REL-OR3/LDP-12DC/3X21 - Single relay

Plug-in octal relays with power contacts, 3 changeover contacts, test button, freewheeling diode, mechanical switch position indicator, polarity A1+, A2-, input voltage: 12 V DC

ME B-22,5 MKDSO RD - Filler plug

DIN rail housing, Filler plug for unoccupied terminal points (MKDSO), width: 21 mm, height: 17. 05 mm, depth: 8.55 mm, color: red (similar RAL 3001)

ME 45 OT-MKDSO GN - Upper housing part

DIN rail housing, Upper housing part for PCB terminal blocks with screw connection, width: 45.2 mm, height: 99 mm, depth: 45.85 mm, color: green (similar RAL 6021)

MKDSO 2,5/ 4-L RD - PCB terminal block

Printed circuit board terminal, nominal current: 24 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm2, number of potentials: 4, number of rows: 1, number of positions per row: 4, product range: MKDSO 2,5/..-L, pitch: 5 mm, connection method: Screw connection with tension sleeve, m

Electronic housing - UEGM-SE 5 BK OHNE LOGO(VPE100)

Side element for electronic housing UEGM ...

MSTBO 2,5/ 3-G1L GY - PCB header

PCB headers, nominal cross section: 2.5 mm2, color: gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Sn, contact connection type: Pin, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: MSTBO 2,5/..-G1L, pitch:

QUINT4-PS/1AC/24DC/1.3/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/1AC/24DC/2.5/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/1AC/24DC/3.8/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120 mm control boxes Preventive – Function monitoring throu

VAL-SEC-T2-3S-350VF-FM - Type 2 surge arrester

Pluggable surge protective device free of leakage current, in accordance with Type 2/Class II, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with remote indication contact

VAL-SEC-T2-1S-350VF-FM - Type 2 surge arres

Pluggable surge protective device free of leakage current, in accordance with Type 2/Class II, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact

MKDSO 2,5/ 4-L GY - PCB terminal block

Printed circuit board terminal, nominal current: 24 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm2, number of potentials: 4, number of rows: 1, number of positions per row: 4, product range: MKDSO 2,5/..-L, pitch: 5 mm, connection method: Screw connection with tension sleeve, m

VAL-SEC-T2-350VF-P - Type 2 surge protection plug

Replacement plug free of leakage current for surge protective devices from the VALVETRAB SEC product range for L-N and L-PEN paths.

ME 35 UT BK - Mounting base housing

DIN rail housing, Lower housing part with metal foot catch, tall design, with vents, width: 35.2 mm, height: 99 mm, depth: 107.3 mm, color: black (similar RAL 9005), cross connection: without bus connector, number of positions cross connector: not relevant

CAB-DSUB25M/OE/22/TP/S/ 1M - Cable

Assembled shielded round cable; connection 1: Twisted pair (25-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 25-position); cable length: 1 m

CAB-DSUB25M/OE/22/TP/S/ 3M - Cable

Assembled shielded round cable; connection 1: Twisted pair (25-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 25-position); cable length: 3 m

CAB-DSUB25M/OE/22/TP/S/ 5M - Cable

Assembled shielded round cable; connection 1: Twisted pair (25-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 25-position); cable length: 5 m

CAB-DSUB25M/OE/22/TP/S/10M - Cable

Assembled shielded round cable; connection 1: Twisted pair (25-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 25-position); cable length: 10 m

CAB-DSUB25M/OE/22/TP/S/15M - Cable

Assembled shielded round cable; connection 1: Twisted pair (25-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 25-position); cable length: 15 m

ME 17,5 OT-MSTBO BK - Upper housing part

DIN rail housing, Upper housing part for connectors with header, width: 17.6 mm, height: 99 mm, depth: 45.85 mm, color: black (similar RAL 9005)

ME B-17,5 MSTBO BK - Filler plug

DIN rail housing, Filler plug for unoccupied terminal points (MSTBO), width: 15 mm, height: 19. 05 mm, depth: 12.3 mm, color: black (similar RAL 9005)

CAB-DSUB37M/OE/22/S/ 1M - Cable

Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 37-position); cable length: 1 m

CAB-DSUB37M/OE/22/S/ 3M - Cable

Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 37-position); cable length: 3 m

CAB-DSUB37M/OE/22/S/ 5M - Cable

Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 37-position); cable length: 5 m

CAB-DSUB37M/OE/22/S/10M - Cable

Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 37-position); cable length: 10 m

CAB-DSUB37M/OE/22/S/15M - Cable

Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB pin strip (1x 37-position); cable length: 15 m

VAL-MS BE/11/1U/FM - Base element

Universal plug-in surge arrester base for up to 240 V applications with two conductors plus ground, with remote indication contact

VAL-MS-T1/T2 48/12.5/11/1U/FM - Lightning/surge arrester type 1/2

Universal varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor (positive pole), without risk assessment for Lightning Protection Levels III and IV, with remote indication contact.

VAL-US 60/11/1U/FM - Type 2 surge arrester

Universal varistor-based plug-in surge arrester for 48 - 60 V DC applications with two conductors plus ground, with remote indication contact

VAL-SEC-T2-N/PE-264/40-P - Type 2 surge protection plug

Replacement plug for surge arresters from the VALVETRAB SEC product range for the N-PE path.

MSTBO 2,5/ 3-G1L BK - PCB header

PCB headers, nominal cross section: 2.5 mm2, color: black, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Sn, contact connection type: Pin, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: MSTBO 2,5/..-G1L, pitch

PLC-RSC- 12DC/21/MS - Relay module

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 12 V DC input voltage

PLC-RSC-120UC/21AU/MS - Relay module

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage

PLC-RSC-125DC/21AU/MS - Relay module

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact and manual operation, 1 changeover contact, 125 V DC input voltage

PLC-RSC-230UC/ 1AU/MS/SEN - Relay module

PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact and manual operation, 1 N/O contact, 230 V AC/220 V DC input voltage

PLC-RPT-230UC/21AU/MS - Relay module

PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with multi-layer gold contact and manual operation, 1 changeover contact, 230 V AC/220 V DC input voltage

QUINT4-PS/24DC/24DC/10/PT/CO

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/24DC/24DC/5/PT/CO

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/3AC/24DC/10

Description QUINT POWER power supplies with integrated NFC interface and SFB technology ensure superior system availability. Adaptable – Signaling thresholds and characteristic curves can be set via NFC Powerful – SFB technology: 6 times the nominal current for 15 ms – Power reserves:

QUINT4-PS/1AC/48DC/5

Description QUINT POWER power supplies with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up t

QUINT4-PS/1AC/24DC/40

Description QUINT POWER power supplies with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up t

QUINT4-PS/24DC/24DC/20/SC

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/24DC/24DC/20/PT

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

QUINT4-PS/24DC/24DC/20/SC/

Description QUINT POWER DC/DC converters with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up

CAB-TE MR24F/OE/24/TP/S/ 5M - Cable

Assembled shielded round cable; controller: Bailey INFI 90; connection 1: Twisted pair (24- position) (The wires are marked and fitted with ferrules); connection 2: Miniature rectangular (MR) connector (1x 24-position); cable length: 5 m

CAB-TE MR36F/OE/24/TP/S/ 3M - Cable

Migration cable for Bailey INFI 90 to modern control platforms. Open-end cable for universal configurations, twisted pair, 3.0 m

CAB-TE MR36F/OE/24/TP/S/ 5M - Cable

Migration cable for Bailey INFI 90 to modern control platforms. Open-end cable for universal configurations, twisted pair, 5.0 m

CAB-DSUB37F/RA/OE/22/TP/S/ 1M - Cable

Assembled shielded round cable; connection 1: Twisted pair (37-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB socket strip (1x 37-position); cable length: 1 m

CAB-DSUB37F/RA/OE/22/TP/S/ 3M - Cable

Assembled shielded round cable; connection 1: Twisted pair (37-position) (The wires are marked and fitted with ferrules); connection 2: D-SUB socket strip (1x 37-position); cable length: 3 m