60 V PNP General-Purpose Transistor

Features • High DC Current Gain (hFE) Range: 100 ~ 300 • High-Current Gain Bandwidth Product (fT): 200 MHz (Minimum) • Maximum Turn-On Time (ton): 45 ns • Maximum Turn-Off Time (toff): 100 ns • Ultra-Small Surface-Mount Package: SOT-223 (PZT2907A) Description The PN2907A, MMBT2907A, and

808 MHz Center Frequency

文件：44.39 Kbytes Page：2 Pages

CM 2-PA-PT4/PLT3S - Test device adapter

CHECKMASTER 2 test adapter for the PT and PLT-SEC product ranges, 35 mm

VIP/S/MC/BASE 17-24/L/EX - Base module

8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 17–24.

VIP/S/MC/BASE 25-32/L/EX - Base module

8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 25–32.

UM-S95U/S7/FLK50/PLC - Passive module

VARIOFACE termination board for Siemens SIMATIC® S5-95U, with a 50-pos. flat-ribbon cable connector which can be connected to an S7 controller, module width: 135 mm

VIP/S/MC/KIT 1-8 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 1-8.

VIP/S/FRONT-MC/KIT 1-8 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 1-8

VAL-MS BE/20/1U/FM - Base element

Universal plug-in surge arrester base for up to 240 V applications with two conductors plus ground, with remote indication contact

VAL-MS-T1/T2 48/12.5/20/1U/FM - Lightning/surge arrester type 1/2

Universal varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor (positive pole), without risk assessment for Lightning Protection Levels III and IV, with remote indication contact

VAL-US 60/20/1U/FM - Type 2 surge protection device

Universal varistor-based plug-in surge arrester for 48 - 60 V DC applications with two conductors plus ground, with remote indication contact

QUINT4-UPS/24DC/24DC/10 - Uninterruptible power supply

QUINT UPS, IQ Technology, DIN rail mounting, Screw connection, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A

QUINT4-UPS/24DC/24DC/10/PN - Uninterruptible power supply

QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A

QUINT4-UPS/24DC/24DC/20/PN - Uninterruptible power supply

QUINT UPS, IQ Technology, PROFINET, DIN rail mounting, Screw connection, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A

QUINT4-UPS/24DC/24DC/20/EC - Uninterruptible power supply

QUINT UPS, IQ Technology, EtherCAT®, DIN rail mounting, Screw connection, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A

ME 22,5 UTG GN - Mounting base housing

DIN rail housing, Lower housing part with metal foot catch, tall design, without vents, width: 22.6 mm, height: 99 mm, depth: 107.3 mm, color: green (similar RAL 6021), cross connection: without bus connector, number of positions cross connector: not relevant

VIP/S/MC/BASE 1-8/L/C/EX - Base module

8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 1–8 and painting

VIP/S/MC/BASE 9-16/L/C/EX - Base module

8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 9–16 and painting

Electronic device circuit breaker - HMC 11 120AC 1A C1D2

HMC series of supplemental circuit protector modules, 1 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended temper

Electronic device circuit breaker - HMC 11 120AC 2A C1D2

HMC series of supplemental circuit protector modules, 2 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended temper

Electronic device circuit breaker - HMC 11 120AC 3A C1D2

HMC series of supplemental circuit protector modules, 3 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended temper

Electronic device circuit breaker - HMC 11 120AC 5A C1D2

HMC series of supplemental circuit protector modules, 5 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended temper

Electronic device circuit breaker - HMC 11 120AC 7.5A C1D2

HMC series of supplemental circuit protector modules, 7.5 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended temp

Electronic device circuit breaker - HMC 11 120AC 10A C1D2

HMC series of supplemental circuit protector modules, 10 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended tempe

Electronic device circuit breaker - HMC 11 120AC 15A C1D2

HMC series of supplemental circuit protector modules, 15 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended tempe

Electronic device circuit breaker - HMC 11 50DC 20A C1D2

HMC series of supplemental circuit protector modules, 20 A rating Why buy this product Optional T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Rated for 50 V DC Hydraulic-magnetic technology provides extended temperature stability

Electronic device circuit breaker - HMC 11 120AC 1A C1D2TBUS

HMC series of supplemental circuit protector bussed modules, 1 A rating Why buy this product T-bus for up to 15 A power distribution UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides ex

Electronic device circuit breaker - HMC 11 120AC 2A C1D2TBUS

HMC series of supplemental circuit protector bussed modules, 2 A rating Why buy this product T-bus for up to 15 A power distribution UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides ex

Electronic device circuit breaker - HMC 11 120AC 3A C1D2TBUS

HMC series of supplemental circuit protector bussed modules, 3 A rating Why buy this product T-bus for up to 15 A power distribution UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides ex

Electronic device circuit breaker - HMC 11 120AC 5A C1D2TBUS

HMC series of supplemental circuit protector bussed modules, 5 A rating Why buy this product T-bus for up to 15 A power distribution UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides ex

Electronic device circuit breaker - HMC 11 120AC 7.5A C1D2TBUS

HMC series of supplemental circuit protector bussed modules, 7.5 A rating Why buy this product T-bus for up to 15 A power distribution UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides

Electronic device circuit breaker - HMC 11 120AC 10A C1D2TBUS

HMC series of supplemental circuit protector bussed modules, 10 A rating Why buy this product T-bus for reduced wiring UL recognized for hazardous locations Class I, Division 2, Groups A, B, C, and D Dual-rated for 50 V DC and 120 V AC Hydraulic-magnetic technology provides extended tempera

VIP/S/MC/BASE 17-24/L/C/EX - Base module

8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 17–24 and painting

VIP/S/MC/BASE 25-32/L/C/EX - Base module

8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 25–32 and painting

VIP/S/MC/KIT 9-16 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 9-16.

VIP/S/MC/KIT 17-24 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 17-24.

VIP/S/MC/KIT 25-32 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 25-32.

VIP/S/FRONT-MC/KIT 9-16 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 9-16

VIP/S/FRONT-MC/KIT 17-24 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 17-24

VIP/S/FRONT-MC/KIT 25-32 - PCB connector

Pair of screw-clamp plugs to connect to VIP base module labeled 25-32

TTC-3-2X1-24DC-PT - Surge protection device

Surge protection for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3

UNO2-PS/1AC/24DC/480W

Description The UNO POWER power supply features maximum energy efficiency and can be used anywhere in the world. Thanks to its high power density, the UNO POWER power supply unit is the ideal solution, particularly in compact control boxes. Space-saving – Particularly compact design – 480

PLC-V8C/PT-24DC/SAM2 - Controller

PLC logic stand-alone module, Generation 2, with 16 I/Os, for plug-in connection to eight digital or analog PLC-INTERFACE terminal blocks, cannot be extended, real-time clock, micro USB female connector, accommodates memory module and Bluetooth adapter, Push-in connection

PLC-V8C/PT-24DC/BM2 - Controller

PLC logic basic module, Generation 2, with 16 I/Os, for plug-in connection to eight digital or analog PLC-INTERFACE terminal blocks, can be extended to 48 I/Os, real-time clock, micro USB female connector, accommodates memory module and Bluetooth adapter, Push-in connection

LM-S-UWA - Mounting adapter

Universal wall adapter for the easy and professional mounting of the LM-S evaluation unit directly on the wall/on a mounting panel

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in

Thermal magnetic UL 489 miniature circuit breakers

Description TMC 8... miniature circuit breakers (MCB) are UL 489 listed and provide branch overload and short-circuit protection. An interrupt capacity of 10 kAIC at up to 277/480 V AC and 125 V DC makes the series ideal for a wide range of applications. The circuit breakers are available in