140 MHz Center Frequency

文件：72.57 Kbytes Page：3 Pages

包装：盒 描述：PLIERS - LARGE NEEDLE NOSE - SS 工具 钳子

DC/DC converter with SFB technology, dip-coated, primary-switched, input: 96-110 V DC, output: 24 V DC, output current: 10 A

Description QUINT DC/DC converter – superior system availability from SFB technology Compact DC/DC converters from the new QUINT POWER generation maximize your system availability. With SFB technology (Selective Fuse Breaking Technology), 6-fold nominal current for 12 ms, it is possible to t

PT-IQ-EX-L-PP - Separating plate

Partition plate for NS-35/7,5 DIN rails to ensure a clearance of 50 mm between the controller and surge protection for PT-IQ-EX systems.

PT-IQ-EX-H-PP - Separating plate

Partition plate for NS-35/7,5 isolated DIN rails (DIN rail is isolated using the AB/NS support bracket) to ensure a clearance of 50 mm between the controller and surge protection for PT-IQEX systems

Dual Differential Line Drivers/ReceiversWith 3 State Outputs

Description The HD29050 features differential line drivers/receivers with three state output designed to meet the spec of EIA RS-422A and 423A. Each device has two drivers/receivers in a 16 pin package. The device becomes in enable state when active high for a driver and active low for a rec

PLC-V8C/PT-24DC/EM - Extension module

PLC logic extension module with 16 I/Os, for plug-in connection to eight PLC-INTERFACE terminal blocks for extending the basic module (a maximum of two extension modules can be connected to a basic module), Push-in connection

TC-2KS50-DO32-EX-PR-CS - Module carrier

Termination Carrier for redundantly connecting 32 MACX Analog Ex i solenoid drivers to digital output cards of the Yokogawa Centum VP controller, via two KS50 connectors, 50-pos. Suitable for Yokogawa ADV551 and ADV561 cards.

TC-2KS40-AO16-EX-PR-CS - Module carrier

Termination carrier for redundantly connecting 16 MACX Analog Ex i signal conditioners to analog output cards of the Yokogawa Centum VP controller, via two KS40 connectors, 40-pos. Suitable for Yokogawa card AAI543.

TC-2KS50-DI16-EX-PR-RS - Module carrier

Termination Carrier for redundantly connecting 16 MACX Analog Ex i NAMUR signal conditioners to digital input cards of the Yokogawa ProSafe-RS controller, via two KS50 connectors, 50-pos. Suitable for Yokogawa SDV144 card.

TC-2KS40-AI16-EX-PR-RS - Module carrier

Termination Carrier for redundantly connecting 16 MACX Analog Ex i repeater power supplies and input signal conditioners or Ex i temperature transducers to analog input cards of the Yokogawa ProSafe-RS controller, via two KS40 connectors, 40-pos. Suitable for Yokogawa SAI143 card

TC-2KS40-AO8-EX-PR-RS - Module carrier

Termination Carrier for redundantly connecting 8 MACX Analog Ex i output signal conditioners to analog output cards of the Yokogawa ProSafe-RS controller, via two KS40 connectors, 40-pos. Suitable for Yokogawa SAI533 card.

TC-C-PTB3-SC-SET1 - Cable set

Cable set for TC-MACX-MCR-PTB power and fault signaling module (Item No. 2904673), for use on the Termination Carrier for signal conditioners from the MACX Analog Ex series.

TC-C-PTB1-AI-SET1 - Cable set

Cable set for MINI MCR-SL-PTB-FM power module (Item No. 2902958) and MINI MCR-SL-FMRC- NC error message module (Item No. 2902961), for use on the termination carrier for modules from the MINI Analog series.

QUINT4-PS/1AC/24DC/1.3/SC

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/1AC/24DC/3.8/SC

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120 mm control boxes Preventive – Function monitoring throu

QUINT4-PS/1AC/24DC/2.5/SC

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/1AC/24DC/2.5/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/1AC/24DC/3.8/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120 mm control boxes Preventive – Function monitoring throu

QUINT4-PS/1AC/24DC/1.3/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

TC-C-2MIN-AI-05061516 - Cable set

Cable set for signal transmission on the termination carrier for modules from the MINI Analog series. Connection of terminal points 5 and 6 of two adjacent MINI Analog modules to the signal PCB via a 4-pos. PTSM connector.

QUINT4-PS/1AC/24DC/1.3/SC

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

UNO2-PS/1AC/24DC/480W

Description The UNO POWER power supply features maximum energy efficiency and can be used anywhere in the world. Thanks to its high power density, the UNO POWER power supply unit is the ideal solution, particularly in compact control boxes. Space-saving – Particularly compact design – 480

QUINT4-PS/1AC/24DC/3.8/SC

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120 mm control boxes Preventive – Function monitoring throu

QUINT4-PS/1AC/24DC/2.5/SC

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/1AC/24DC/2.5/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/1AC/24DC/3.8/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120 mm control boxes Preventive – Function monitoring throu

QUINT4-PS/1AC/24DC/1.3/PT

Description QUINT POWER power supplies are exceptionally small yet offer superior system availability in the sub 100 W power range. Powerful – Static boost of up to 125 (PN) for a sustained period – Dynamic boost of up to 200 (PN) for 5 s Space-saving – Slim design – Slim design for 120

QUINT4-PS/3AC/24DC/10

Description QUINT POWER power supplies with integrated NFC interface and SFB technology ensure superior system availability. Adaptable – Signaling thresholds and characteristic curves can be set via NFC Powerful – SFB technology: 6 times the nominal current for 15 ms – Power reserves:

CBB 12 2X6RC-PT - Potential distributors

Device circuit breaker boards for twelve thermal-magnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.

CHECKMASTER 2 - Test device

CHECKMASTER 2 test device for testing the correct function of surge protective devices from Phoenix Contact.

TC-2KS40-AI16-M-PRH-CS - Module carrier

Termination Carrier for redundantly connecting 16 MINI Analog signal conditioners to analog input cards of the Yokogawa Centum VP controller, via KS40 connector, 40-pos. Suitable for Yokogawa AAI143 cards.

Test device adapter - CM 2-PA-VAL-MS

CHECKMASTER 2 test adapter for the VAL-MS product range

Test device adapter - CM 2-PA-CTM

CHECKMASTER 2 test adapter for the CTM product range

CM 2-PA-FLT/VAL-CP/SEC - Test device adapter

CHECKMASTER 2 test adapter for the FLT-CP, FLT-SEC, VAL-CP, and VAL-SEC product ranges

Test device adapter - CM 2-PA-PT/PLT

CHECKMASTER 2 test adapter for the PT and PLT-SEC product ranges, 17.5 mm

VAL-SEC-T2-N/PE-350-P - Type 2 surge protection plug

Replacement plug for surge arresters from the VALVETRAB SEC product range for the N-PE path.

VAL-SEC-T2-N/PE-175-P - Type 2 surge protection plug

Replacement plug for surge arresters from the VALVETRAB SEC product range for the N-PE path.

PT-IQ-5-BE-UT - Surge protection base-element

Base element for PLUGTRAB PT-IQ protective plug (5-HF, 4X1, 2X2)

PT-IQ-PTB-BE-UT - Surge protection base-element

Base element for the PLUGTRAB PT-IQ-PTB... supply and remote signaling module Product

VAL-MS/3EQ-BE - Type 2 surge protection device

Base element for type 2 arresters of the VALVETRAB MS product range, with remote indication contact. Version for 3-phase power supplies with PEN conductor.

VAL-MS/3EQ-BE/FM - Type 2 surge protection device

Base element for type 2 arresters of the VALVETRAB MS product range, with remote indication contact. Version for 3-phase power supplies with PEN conductor.

UNO-PS/350-900DC/24DC/60W

Description UNO POWER DC/DC converter – for photovoltaic applications The UNO POWER DC/DC converter is specifically designed for photovoltaic applications. It supports direct field installation thanks to the DC wide range input. Due to its compact dimensions and large DC wide range input, t

Solid-state relays - PLC-HPT-24DC/220DC/10

PLC-INTERFACE, hybrid solid-state relay incl. bypass relay with push-in connection, for mounting on NS 35/7,5 DIN rail, input: 24 V DC, output: 12 V DC - 250 V DC/10 A

Solid-state relays - PLC-HSC-24DC/220DC/10

PLC-INTERFACE, hybrid solid-state relay incl. bypass relay with screw connection, for mounting on NS 35/7,5 DIN rail, input: 24 V DC, output: 12 V DC ... 250 V DC/10 A

PT-IQ-3-EX-BE-UT - Surge protection base-element

Base element for protective plug PLUGTRAB PT-IQ-1X2-EX

PT-IQ-5-EX-BE-UT - Surge protection base-element

Base element for protective plug PLUGTRAB PT-IQ-2X2-EX

FLT-ISG-BR-11 - Fixing bracket

Bracket for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 11 mm.

FLT-ISG-BR-14 - Fixing bracket

Bracket for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 14 mm.

FLT-ISG-BR-18 - Fixing bracket

Bracket for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 18 mm.

FLT-ISG-PL-11 - Fixing plate

Plate for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 11 mm

FLT-ISG-PL-14 - Fixing plate

Plate for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 14 mm.

VAL-MB-T1/T2 1000DC-PV/2V - Lightning/surge arrester type 1/2

Lightning current arrester/surge protective device for 2-pos. isolated and grounded 1,000 V DC PV systems, for DIN rail mounting, temperature-monitored protective elements, status message on the module

VAL-MB-T1/T2 1500DC-PV/2V-FM - Lightning/surge arrester type 1/2

Lightning current arrester/surge protective device for 2-pos. isolated and grounded 1,500 V DC PV systems, for DIN rail mounting, with remote indication contact, temperature-monitored protective elements, status message on the module.

VAL-MB-T2 1500DC-PV/2V-FM - Type 2 surge arrester

Surge protective device for 2-pos. isolated and grounded 1,500 V DC PV voltage systems, for DIN rail mounting, with remote indication contact, temperature-monitored protective elements, status message on the module.

VAL-MB-T2 1500DC-PV/2V - Type 2 surge arrester

Surge protective device for 2-pos. isolated and grounded 1,500 V DC PV voltage systems, for DIN rail mounting, temperature-monitored protective elements, status message on the module

TC-2KS40-AI16-EX-PR-CS - Module carrier

Termination Carrier for redundantly connecting 16 MACX Analog Ex i signal conditioners to analog input cards of the Yokogawa CENTUM VP controller, via two KS40 connectors, 40-pos. Suitable for Yokogawa AAI141 and AAI143 cards.

TC-2KS50-DO16-EX-PR-RS - Module carrier

Termination Carrier for redundantly connecting 16 MACX Analog Ex i solenoid drivers to digital output cards of the Yokogawa ProSafe RS controller, via two KS50 connectors, 50-pos. Suitable for Yokogawa SDV541 card.

VAL-MS TE-AR/75X350/3EQ/FM - Type 2 sur protection base element

Equalizer surge protective device assembly, 3-mode, type 2 arresters for 2-wire signals up to 75 V with field disconnect terminals and form-C field monitor contact

QUINT4-PS/1AC/24DC/40

Description QUINT POWER power supplies with SFB Technology and preventive function monitoring ensure superior system availability. Powerful – SFB Technology: 6 times the nominal current for 15 ms – Power reserves: Static boost of up to 125 (PN) for a sustained period Dynamic boost of up t