丝印代码：2157；GaAs INTEGRATED CIRCUIT

FEATURES • Control voltage : Vcont (H) = 2.5 to 3.3 V (3.0 V TYP.) : Vcont (L) = 0 to 0.4 V (0 V TYP.) • Low insertion loss : Lins1 = 0.60 dB TYP. @ f = 2.3 to 2.7 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Lins2 = 0.60 dB TYP. @ f = 3.3 to 3.8 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Lins3 =

丝印代码：2157；GaAs INTEGRATED CIRCUIT

FEATURES • Control voltage : Vcont (H) = 2.5 to 3.3 V (3.0 V TYP.) : Vcont (L) = 0 to 0.4 V (0 V TYP.) • Low insertion loss : Lins1 = 0.60 dB TYP. @ f = 2.3 to 2.7 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Lins2 = 0.60 dB TYP. @ f = 3.3 to 3.8 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Lins3 =

Bandpass Filter

Bandpass Filter KR Series 2157 Center Frequency can be scaled to meet your requirement

Customer Specification

Construction 1) Conductor a) Material Brass, Alloy 260 per ASTM B-134 b) Stranding Solid 2) Braid Data a) Nominal Size 3/8 b) Expansion Range 3/8 to 3/4 c) Number of Carriers 48 d) Nominal Percent Coverage N/A e) Total Number of Ends/Carrier 8 f) Approx. DC Resistance 4.0 (Ohms/1000ft)

Quad Alphanumeric Display - White 0.54\" Digits w/ I2C Backpack - STEMMA QT / Qwiic

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful white hue. It's super bright and designed for viewing from distances up to 23

包装：零售封装 描述：FM RADIO KIT V2.0 创客/DIY，教育 教学套件

包装：盒 描述：UB 1093 BLACK 电缆，电线 - 管理 衬套，索环

Universal Bushings

文件：105.3 Kbytes Page：1 Pages

MALE/FEMALE THREADED STANDOFFS

文件：310.8 Kbytes Page：1 Pages

Pre-Crimped Leads

Molex’s range of pre-crimped leads offers a simple, cost-effective solution for prototyping, pre-production and mass production requirements. These leads are offered in female-to-female and male-to-male configurations in lengths of 75.00 to 600.00mm

Bandpass Filter

Bandpass Filter KR Series 2157 Center Frequency can be scaled to meet your requirement

Pre-Crimped Lead Clik-Mate Male-to-Clik-Mate Male, Tin (Sn) Plating, 150.00mm Length, 24 AWG, Black

Pre-Crimped Lead Clik-Mate Male-to-Clik-Mate Male, Tin (Sn) Plating, 150.00mm Length, 24 AWG, Black

Pre-Crimped Leads

Molex’s range of pre-crimped leads offers a simple, cost-effective solution for prototyping, pre-production and mass production requirements. These leads are offered in female-to-female and male-to-male configurations in lengths of 75.00 to 600.00mm

Bandpass Filter

General Description KR 2157-125-10-50 is a 125 MHz bandpass filter. The filter has a 12.5 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 125 MHz Bandpass • 50

Bandpass Filter

General Description KR 2157-130-50-50 is a 130 MHz bandpass filter. The filter has a 50 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 130 MHz Bandpass • 50 Ω •

Bandpass Filter

General Description KR 2157-140-10-50 is a 140 MHz bandpass filter. The filter has a 10 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 140 MHz Bandpass • 50 Ω •

Bandpass Filter

General Description KR 2157-144-10-50 is a 144 MHz bandpass filter. The filter has a 14.4 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 144 MHz Bandpass • 50

Bandpass Filter

General Description KR 2157-17.25-5-50 is a 17.25 MHz bandpass filter. The filter has a 5 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 17.25 MHz Bandpass

Bandpass Filter

General Description KR 2157-205-49-50 is a 205 MHz bandpass filter. The filter has a 49 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 205 MHz Bandpass • 50 Ω •

Bandpass Filter

General Description KR 2157-20-5-50 is a 20 MHz bandpass filter. The filter has a 1 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 20 MHz Bandpass • 50 Ω • D

Bandpass Filter

Bandpass Filter KR Series 2157 Center Frequency can be scaled to meet your requirement

Bandpass Filter

Bandpass Filter KR Series 2157 Center Frequency can be scaled to meet your requirement

Bandpass Filter

General Description KR 2157-300-5-50 is a 300 MHz bandpass filter. The filter has a 15 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 300 MHz Bandpass • 50 Ω

Bandpass Filter

General Description KR 2157-30-5-50 is a 30 MHz bandpass filter. The filter has a 1.5 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 30 MHz Bandpass • 50 Ω •

Bandpass Filter

General Description KR 2157-325-49-50 is a 205 MHz bandpass filter. The filter has a 49 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 325 MHz Bandpass • 50 Ω •

Bandpass Filter

General Description KR 2157-34.5-5-50 is a 34.5 MHz bandpass filter. The filter has a 5 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 34.5 MHz Bandpass • 50 Ω •

Bandpass Filter

General Description KR 2157-40-10-50 is a 40 MHz bandpass filter. The filter has a 10 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 40 MHz Bandpass • 50 Ω • DIP

Bandpass Filter

General Description KR 2157-40-5-50 is a 40 MHz bandpass filter. The filter has a 2 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 40 MHz Bandpass • 50 Ω • D

Bandpass Filter

General Description KR 2157-428-10-50 is a 428 MHz bandpass filter. The filter has a 42.8 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 428 MHz Bandpass • 50

Bandpass Filter

General Description KR 2157-455-8-50 is a 455 MHz bandpass filter. The filter has a 36 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 455 MHz Bandpass • 50 Ω

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

SEALED AMPLIMITE D-SUBMINIATURE CONNECTORS

ENVIRONMENTALLY SEALED • IP67 rated • Grommet, interfacial seal, and internal connector sealant • Tested to 1 m depth FULL RANGE • Standard and high-density versions COMPATIBLE • Designed to meet MIL-DTL-24308 • Uses AS39029 QPL contacts • Intermateable with standard D-Subminiatur

Bandpass Filter

General Description KR 2157-15.75-5-50 is a 51.75 MHz bandpass filter. The filter has a 5 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 51.75 MHz Bandpass • 50 Ω

Bandpass Filter

General Description KR 2157-515-49-50 is a 205 MHz bandpass filter. The filter has a 49 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 515 MHz Bandpass • 50 Ω •

Bandpass Filter

General Description KR 2157-52-7-50 is a 52 MHz bandpass filter. The filter has a 7 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 52 MHz Bandpass • 50 Ω • DIP P

Bandpass Filter

Bandpass Filter KR Series 2157 Center Frequency can be scaled to meet your requirement

Micro-Fit Connector System

Description: Micro-Fit+ Receptacle Housing, Single Row, 5 Circuits, UL 94V-0, Glow-Wire Capable, Black Application Power, Wire-to-Board

Connector Housings

Product Description : Micro-Fit+ Plug Housing, Single Row, 2 Circuits, UL 94V-0, Panel Mount Ears, Glow-Wire Capable, Black

Connector Housings

Product Description : Micro-Fit+ Plug Housing, Single Row, 2 Circuits, UL 94V-0, Free Hanging, Glow-Wire Capable, Black

Micro-Fit Connector System

Description: Micro-Fit+ Receptacle Housing, Single Row, 5 Circuits, UL 94V-0, Glow-Wire Capable, Black Application Power, Wire-to-Board

Micro-Fit Connector System

Description: Micro-Fit+ Receptacle Housing, Single Row, 5 Circuits, UL 94V-0, Glow-Wire Capable, Black Application Power, Wire-to-Board

Micro-Fit Connector System

Description: Micro-Fit+ Right-Angle Header, 3.00mm Pitch, Single Row, 6 Circuits, Matte Tin (Sn) Plating, UL 94V-0, Glow-Wire Capable, Black Application Power, Wire-to-Board

Micro-Fit Connector System

Description: Micro-Fit+ Right-Angle Header, 3.00mm Pitch, Single Row, 6 Circuits, Matte Tin (Sn) Plating, UL 94V-0, Glow-Wire Capable, Black Application Power, Wire-to-Board

Micro-Fit Connector System

Description: Micro-Fit+ Right-Angle Header, 3.00mm Pitch, Single Row, 6 Circuits, Matte Tin (Sn) Plating, UL 94V-0, Glow-Wire Capable, Black Application Power, Wire-to-Board

Male Headers with Solder and Press-In Pins, MCS-MIDI Pin Spacing: 2.5 mm

● Horizontal or vertical PCB mounting via straight and angled solder pins ● Also available with press-in pins for solder-free connection to the PCB ● 100% protected against mismating; only mating halves with the same pole number can be connected together ● Coding pins available

Bandpass Filter

General Description KR 2157-650-10-50 is a 650 MHz bandpass filter. The filter has a 62 MHz 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 650 MHz Bandpass • 50 Ω •

Bandpass Filter

Bandpass Filter KR Series 2157 Center Frequency can be scaled to meet your requirement

Bandpass Filter

General Description KR 2157-80-5-50 is a 80 MHz bandpass filter. The filter has a 4 MHz min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 80 MHz Bandpass • 50 Ω • D

Bandpass Filter

General Description KR 2157-815-49-50 is a 815 MHz bandpass filter. The filter has a 49 min 3 dB bandwidth and is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Features • 815 MHz Bandpass • 50 Ω •

FA2 Crimp Applicator for MX150 22 Grip Mat Seal Receptacle Terminals

FEATURES Applicator designed to industry-standard mounting and 135.80mm (5.346”) shut height Quick setup time; plus, the crimp height, track and feed adjustments can be set without removing the applicator from the press Fine adjustment allows users to achieve target with little effort by adjust

FA2 Crimp Applicator for MX150 22 Grip Mat Seal Receptacle Terminals

FEATURES Applicator designed to industry-standard mounting and 135.80mm (5.346”) shut height Quick setup time; plus, the crimp height, track and feed adjustments can be set without removing the applicator from the press Fine adjustment allows users to achieve target with little effort by adjust

FA2 Pneumatic Feed Crimp Applicator for MX150 22 Grip Mat Seal Receptacle Terminals

FEATURES Applicator designed to industry-standard mounting and 135.80mm (5.346”) shut height Quick setup time; plus, the crimp height, track and feed adjustments can be set without removing the applicator from the press Fine adjustment allows users to achieve target with little effort by adjust