1/2 (12.7 mm) Single - Turn Wirewound Servo Mount Type Precision PotentiometerS

FEATURES • Ohmic value range: 50  up to 20 k • Smallest size available: 12.7 mm • Center tap on request • Custom shafts available on request • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

Temperature Sensors Line Guide

文件：736.09 Kbytes Page：11 Pages

TYPE N PLUG SOLDERLESS CRIMP LMR400

ELECTRICAL: IMPEDANCE: 50 OHMS WITHSTAND VOLTAGE: 2500V FREQUENCY RANGE: 0~6 GHz VSWR: 500 CYCLE CABLE RETENTION: > 40 POUNDS MISCELLANEOUS: COMPONENTS SHALL BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH L-COM SPECIFICATIONS PS-0031. ALL DIMENSIONS ARE FOR REF

SACC-SQ-M12FS-4CON-25F/0,5 - Device connector front mounting

Device connector front mounting, 4-position, Socket, straight, M12, coding: A , Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb

HC-STA-B24-HHFD-BLANK-EL-AL - Housing

Sleeve housing B24, for double locking latch, material: Die-cast aluminum, salt water resistant, variable, height: 76 mm, cable gland: none, Standard, Without thread opening for screw connection

HC-STA-B16-HHWD-BLANK-EL-AL - Housing

Sleeve housing B16, with double locking latch, material: Die-cast aluminum, salt water resistant, variable, height: 76 mm, cable gland: none, Standard, Without thread opening for screw connection

HC-STA-B24-HLWD-BLANK-EL-AL - Housing

Sleeve housing B24, with double locking latch, material: Die-cast aluminum, salt water resistant, variable, height: 60 mm, cable gland: none, Standard, Without thread opening for screw connection

HC-STA-B24-HHWD-BLANK-EL-AL - Housing

Sleeve housing B24, with double locking latch, material: Die-cast aluminum, salt water resistant, variable, height: 76 mm, cable gland: none, Standard, Without thread opening for screw connection

HC-ADV-B06-HLWH-BLANK-ELC-AL - Housing

Sleeve housing B6, with screw locking, material: Die-cast aluminum, salt water resistant, variable, height: 74 mm, cable gland: none, Offshore/EMC, Without thread opening for screw connection, conductive seal (EMC properties

HC-ADV-B06-HHWH-BLANK-ELC-AL - Housing

Sleeve housing B6, with screw locking, material: Die-cast aluminum, salt water resistant, variable, height: 93.7 mm, cable gland: none, Offshore/EMC, Without thread opening for screw connection, conductive seal (EMC properties)

raaco Assortment Boxes

Assorter Environmentally-friendly, made from recyclable materials Assorter is the only one of our 3 assortment boxes, which is available with fixed compartments. Assorter is a system designed and created specifically for practical sorting. Assorter was developed according to DFD guidelines

raaco Assortment Boxes

Assorter Environmentally-friendly, made from recyclable materials Assorter is the only one of our 3 assortment boxes, which is available with fixed compartments. Assorter is a system designed and created specifically for practical sorting. Assorter was developed according to DFD guidelines

1/2 (12.7 mm) Single - Turn Wirewound Servo Mount Type Precision PotentiometerS

FEATURES • Ohmic value range: 50  up to 20 k • Smallest size available: 12.7 mm • Center tap on request • Custom shafts available on request • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

VS-FSDB-IP20SDA/981/5,0 SCO - Patch cable

Assembled USB cable, shielded, color: black, PVC outer sheath, USB mini-B/IP20 on USB type A/IP20, length: 5 m

IP68 Waterproof Connectors and Adapters

Features • The SMA family operates up to 18 GHz. • The TNC family are larger and more rugged, and operate to 11 GHz. • Adapters include hermetically sealed connectors to 1 x 10-8 cc/sec, making them ideal for high pressure, vacuum applications and the prevention of liquid or gas leakage. • In

NBC-R4AC/1,0-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 1 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4AC/2,0-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 2 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4AC/3,0-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 3 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4AC/5,0-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 5 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4AC/7,5-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 7.5 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact

NBC-R4AC/10,0-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 10 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact a

NBC-R4AC/15,0-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 15 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact a

NBC-R4AC/1,0-93M/R4ACR - Patch cable

Patch cable, degree of protection: IP20, cable length: 1 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4AC/3,0-93M/R4ACR - Patch cable

Patch cable, degree of protection: IP20, cable length: 3 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4AC/5,0-93M/R4ACR - Patch cable

PROFINET patch cable, shielded, star-quad, 22 AWG stranded (7-wire), green, straight RJ45 connector/IP20 to angled RJ45 connector/IP20, length: 5.0 m Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control

NBC-R4ACR/0,5-93M/R4ACR - Patch cable

Patch cable, degree of protection: IP20, cable length: 0.5 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact

NBC-R4ACR/1,0-93M/R4ACR - Patch cable

Patch cable, degree of protection: IP20, cable length: 1 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4ACR/2,0-93M/R4ACR - Patch cable

Patch cable, degree of protection: IP20, cable length: 2 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

IP68 Waterproof Connectors and Adapters

Features • The SMA family operates up to 18 GHz. • The TNC family are larger and more rugged, and operate to 11 GHz. • Adapters include hermetically sealed connectors to 1 x 10-8 cc/sec, making them ideal for high pressure, vacuum applications and the prevention of liquid or gas leakage. • In

NBC-R4AC/4,0-93M/R4AC - Patch cable

Patch cable, degree of protection: IP20, cable length: 4 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact an

NBC-R4AC/3,0-93E/R4AC - Network cable

Network cable, degree of protection: IP20, cable length: 3 m, number of positions: 4, 100 Mbps, CAT5, cable outlet: straight, Ethernet Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Co

SAC-5P-M12MS/ 5,0-652/M12FS - Sensor/actuator cable

Sensor/actuator cable, 5-position, TPE halogen-free, welding sputter-resistant, highly flexible, yellow, Plug straight M12, coding: A, on Socket straight M12, coding: A, cable length: 5 m

SAC-5P-M12MS/10,0-652/M12FS - Sensor/actuator cable

Sensor/actuator cable, 5-position, TPE halogen-free, welding sputter-resistant, highly flexible, yellow, Plug straight M12, coding: A, on Socket straight M12, coding: A, cable length: 10 m

NBC-FSDBP/0,25-937/R4AQ - Network cable

Network cable, cable length: 0.25 m, number of positions: 4, CAT5, cable outlet: straight, PROFINET Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact angle

Time and light control Hour counters

Description - Hour counter with synchronous motor drive - Front panel devices with click-in or stretch clamp supports for walls up to a maximum of 10 mm thick - Clamp or flat plug connection 6.3 mm - Versions for direct voltage with quartz-controlled stepper motor - Progress display

NBC-FSDEC/0,25-93E/R4ACOG - Network cable

Network cable, degree of protection: IP20, cable length: 0.25 m, number of positions: 4, CAT5, cable outlet: straight, Ethernet Your advantages • Perfect for industrial applications • Perfect for office, building, and protected industrial applications (e.g., in control cabinets) • Compact a

This document describes specifications for the F1650NLGI Zero/Complex IF Modulator implementing Zero-DistortionTM technology for low power consumption with improved ACLR. This device interfaces directly to a high performance Tx dual DAC.

FEATURES  Power Gain = 3.25dB  Direct 100Ω differential drive from Tx DAC 

IDTF1653 RECOMMENDED OPERATION CONDITIONS

FEATURES  Power Gain = 3dB  Direct 100Ω differential drive from Tx DAC 

Evaluating the ADN4620/ADN4621 3.75 kV RMS, Dual-Channel LVDS 2.5 Gigabit Isolators

GENERAL DESCRIPTION The EVAL-ADN4620EBZ and EVAL-ADN4621EBZ allow quick and easy evaluation of the ADN4620/ADN4621 low voltage differential signaling (LVDS) isolators without the need for external components. The ADN4620/ADN4621 employ the Analog Devices, Inc., iCoupler® technology to combine

DPD Demodulator for PA Linearization, 1300MHz to 2900MHz

FEATURES (I OR Q PATH) • Wide flat performance IF BW • Wide RF and LO BWs (~ 1.6 GHz) • Ideal for Multi-Carrier Systems •Drives ADC directly • Ultra linear + 41dBmIP3O • Low Noise Figure • Excellent ACLR performance • 200 Ω output impedance • Fully integrated DPD demodulator •6x6 36 pin

Ideal for Multi-Carrier Systems

FEATURES  Ideal for Multi-Carrier Systems  Lowside or Highside LO  11.8dB Gain  Ultra linear +43dBm IP3O using HS LO or +37.5 dBm IP3O using LS LO  9.7dB NF  200 Ω output impedance  Wide flat-performance IF BW  Drives ADC directly for DPD applications  Low Power Consumption  5

Ideal for Multi-Carrier Systems

FEATURES  Ideal for Multi-Carrier Systems  Lowside or Highside LO  11.7dB Gain  Ultra linear +45dBm IP3O using HS LO or +42dBm IP3O using LS LO  9.7 dB NF  200 Ω output impedance  Wide flat performance IF BW  Drives ADC directly for DPD applications  Low Power Consumption  5x5

Evaluation Board for the ADF5901, ADF5904, and ADF4159 Chipset for a 24 GHz FMCW Radar

FEATURES Evaluates the chipset containing the ADF5901 24 GHz Tx MMIC, the ADF5904 24 GHz Rx MMIC, the ADF4159 13 GHz PLL Accompanying software controls all functions from a PC GENERAL DESCRIPTION The EV-RADAR-MMIC2 evaluation board is designed to evaluate the performance of the ADF5901, a 24

3.3V, 125Mbps, 155Mbps Clock and Data Recovery

General Description The SY69753AL is a complete Clock Recovery and Data Retiming integrated circuit for OC-3/STS-3 applications at 155Mbps NRZ. The device is ideally suited for SONET/SDH/ATM applications and other high-speed data transmission systems. Clock recovery and data retiming is performe

7-Bit 0.25dB Digital step Attenuator 150MHz to 5000MHz

FEATURES  Glitch-Free, 2kV HBM)  Serial & Parallel In

This document describes specifications for the F1650NLGI Zero/Complex IF Modulator implementing Zero-DistortionTM technology for low power consumption with improved ACLR. This device interfaces directly to a high performance Tx dual DAC.

FEATURES  Power Gain = 3.25dB  Direct 100Ω differential drive from Tx DAC 

IDTF1653 RECOMMENDED OPERATION CONDITIONS

FEATURES  Power Gain = 3dB  Direct 100Ω differential drive from Tx DAC 

DPD Demodulator for PA Linearization, 1300MHz to 2900MHz

FEATURES (I OR Q PATH) • Wide flat performance IF BW • Wide RF and LO BWs (~ 1.6 GHz) • Ideal for Multi-Carrier Systems •Drives ADC directly • Ultra linear + 41dBmIP3O • Low Noise Figure • Excellent ACLR performance • 200 Ω output impedance • Fully integrated DPD demodulator •6x6 36 pin

Ideal for Multi-Carrier Systems

FEATURES  Ideal for Multi-Carrier Systems  Lowside or Highside LO  11.7dB Gain  Ultra linear +45dBm IP3O using HS LO or +42dBm IP3O using LS LO  9.7 dB NF  200 Ω output impedance  Wide flat performance IF BW  Drives ADC directly for DPD applications  Low Power Consumption  5x5

Ideal for Multi-Carrier Systems

FEATURES  Ideal for Multi-Carrier Systems  Lowside or Highside LO  11.8dB Gain  Ultra linear +43dBm IP3O using HS LO or +37.5 dBm IP3O using LS LO  9.7dB NF  200 Ω output impedance  Wide flat-performance IF BW  Drives ADC directly for DPD applications  Low Power Consumption  5

TXRX_982_R1 Evaluation Board

SY88973/SY88982/MIC3001-Based SFP Module General Description This evaluation board is an implementation of the SFP module in a different form factor with on board faults indicators (LEDs) and a DB-25 connector for serial communication. The design uses Micrels MIC3001 controller, SY88982 (pin com

Time and light control Hour counters

Description - Hour counter with synchronous motor drive - Front panel devices with click-in or stretch clamp supports for walls up to a maximum of 10 mm thick - Clamp or flat plug connection 6.3 mm - Versions for direct voltage with quartz-controlled stepper motor - Progress display

Time and light control Hour counters

Description - Hour counter with synchronous motor drive - Plug-in base with quick fastening for 35 mm profile rails (DIN EN 60 715) - Screw terminals - Contact protection to comply with accident prevention regulation BGV A3 - Housing colour: anthracite - Versions for direct voltage with qu

SAC-5P-M12MS/ 1,0-652/M12FS - Sensor/actuator cable

Sensor/actuator cable, 5-position, TPE halogen-free, welding sputter-resistant, highly flexible, yellow, Plug straight M12, coding: A, on Socket straight M12, coding: A, cable length: 1 m

SACC-CI-M12MSL-4FE-L180 THR T - Contact carrier

Contact carrier, Power, 5-position, Plug, straight, M12, coding: L , PCB mounting, THR solder connection, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb

SACC-CI-M12FSL-4FE-L180 THR T - Flush-type connector

Flush-type connector, Power, 5-position, Socket, straight, M12, coding: L , PCB mounting, THR solder connection Your advantages • For compact devices: transmit high power in a confined space • Reduced mounting costs thanks to two-piece device connector • Packaging available for automated pi

SACC-CI-M12MSK-4PE-L180 THR T - Flush-type connector

Flush-type connector, Power, 5-position, Plug, straight, M12, coding: K , PCB mounting, THR solder connection, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb

Time and light control Hour counters

Description - Hour counter with synchronous motor drive - Front panel devices with click-in or stretch clamp supports for walls up to a maximum of 10 mm thick - Clamp or flat plug connection 6.3 mm - Versions for direct voltage with quartz-controlled stepper motor - Progress display

SACC-CI-M12MSM-5PE-L180 THR T - Contact carrier

Contact carrier, Power, 6-position, Plug, straight, M12, coding: M , PCB mounting, THR solder connection Your advantages • For compact devices: transmit high power in a confined space • Reduced mounting costs thanks to two-piece device connector • Packaging available for automated pick and

SACC-CI-M12FSM-5PE-L180 THR T - Contact carrier

Contact carrier, Power, 6-position, Socket, straight, M12, coding: M, PCB mounting, THR solder connection, Alternative product in accordance with RoHS II without Exemption 6c (Pb