包装：散装 描述：TAPERED CAP - OD RANGE: 274.1 - 五金件，紧固件，配件 孔插头 - 锥形盖

1.3 Watts Axial Leaded Zener Diodes

VOLTAGE RANGE: 2.4 - 200V POWER: 1.3Wa t t s Features ● Complete Voltage Range 2.4 to 200 Volts ● High peak reverse power dissipation ● High reliability ● Low leakage current

GAMMA SEALS

DESCRIPTION The BECA 130 profile is a gamma seal. Sealing happens when the axial force of the lip comes into contact with the housing. The metal part protects the rubber axial lip from external pollution. APPLICATIONS Axles Machine tools Electric motors Pumps Transmissions

THREADED INSERT, BLIND, REGULAR HEAD STYLE LIGHT DUTY

文件：120.98 Kbytes Page：1 Pages

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

25Gmodul

Product specification • certified by GHMT according to ISO/IEC TR-11801-9905 for 25GBASE-T in the Channel-Link with 30 m • in preparation: ISO/IEC TR-11801-9909 for 25GBASE-T in channel link over 30 m • completely downward compatible by complying with class EA according to ISO/IEC 11801-1 and D

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

OpDAT REGpro housing with splice tray and crimp splice holder

Product specification • splice distributor for TH35 rail without front cover • gray housing • with or without splice tray with crimp splice holder (CSH) for up to 12 splices • installation of two shrink splice holders (SSH)on splice tray is possible • with fiber reservoir • custom-labeled id

OpDAT REG Splice Distributor for shrink splice holder

Product specification • Very compact splice distributor for TH35 rail • Flat design with an inclined outlet (connections facing downward) and a large cabling space • Great ease of use even with high cable channels in the immediate surroundings • To mount pigtails or pre-terminated installation

Modul 19 inch module frame 1RU 24 Port light gray unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of silver anodized aluminum • plastic module support with dust protection covers (other colors available as accessory), detachable to the front • integrated cable support with opt

Modul surface mount housing 2 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 3 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 4 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 6 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 8 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 12 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

REGplus IP20 E-DAT modul

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • Cat.6A component test acc

REGplus IP20 E-DAT modul coupler 180°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

REGplus IP20 E-DAT modul coupler 90°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

REGplus IP20 C6Amodul 180°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 180° RJ45 individual module • cable feed 45° from the top, plug direction 45° downwards • certified to GHMT Cat.6

C6Amodul 24 port 180°M 1RU

Product specification • 19 inch 1RU module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA up to 500 MHz

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

REGplus IP20 C6Amodul 270°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 270° RJ45 individual module • cable feed 45° from the bottom, plug direction 45° downwards • certified to GHMT Ca

Modul 19 inch module frame 1RU 24 port black unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of black anodized aluminum • plastic module support with dust protection covers (other colors available as accessories), detachable to the front • integrated cable support with op

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

Modul surface mount housing 2 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

Modul surface mount housing 3 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

REGplus IP20 E-DAT modul coupler 180°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

Modul surface mount housing 4 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

REGplus IP20 E-DAT modul coupler 90°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

Modul surface mount housing 6 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

REGplus IP20 C6Amodul 180°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 180° RJ45 individual module • cable feed 45° from the top, plug direction 45° downwards • certified to GHMT Cat.6

Modul surface mount housing 8 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

C6Amodul 24 port 180°M 1RU

Product specification • 19 inch 1RU module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA up to 500 MHz

Modul surface mount housing 12 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

REGplus IP20 E-DAT modul

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • Cat.6A component test acc

REGplus IP20 C6Amodul 270°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 270° RJ45 individual module • cable feed 45° from the bottom, plug direction 45° downwards • certified to GHMT Ca

Modul 19 inch module frame 1RU 24 Port light gray unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of silver anodized aluminum • plastic module support with dust protection covers (other colors available as accessory), detachable to the front • integrated cable support with opt

Modul 19 inch module frame 1RU 24 port black unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of black anodized aluminum • plastic module support with dust protection covers (other colors available as accessories), detachable to the front • integrated cable support with op

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

REGplus IP20 C6Amodul 180°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 180° RJ45 individual module • cable feed 45° from the top, plug direction 45° downwards • certified to GHMT Cat.6

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

E-DAT modul coupler 8(8) 90° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 90° coupler made of refined zinc die-casting • especially suita

25Gmodul

Product specification • certified by GHMT according to ISO/IEC TR-11801-9905 for 25GBASE-T in the Channel-Link with 30 m • in preparation: ISO/IEC TR-11801-9909 for 25GBASE-T in channel link over 30 m • completely downward compatible by complying with class EA according to ISO/IEC 11801-1 and D

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

C6Amodul 270° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools; strain relief directly snapped on to stuffer cap • easy to install connection

C6Amodul 1 port 180°M UPk pure white

Product specification Modular wall outlet for the construction of a passive network infrastructure with the highest quality requirements. The junction box is suitable for connecting telephones up to 10 Gbit networks and power supply with PoE with up to 90W. The very robust, nickel-plated zinc di

C6Amodul 1 port 180°M UP0

Product specification Modular wall outlet for the construction of a passive network infrastructure with the highest quality requirements. The junction box is suitable for connecting telephones up to 10 Gbit networks and power supply with PoE with up to 90W. The very robust, nickel-plated zinc di

C6Amodul 2 port 180°M AP pure white

Product specification Modular wall outlet for the construction of a passive network infrastructure with the highest quality requirements. The junction box is suitable for connecting telephones up to 10 Gbit networks and power supply with PoE with up to 90W. The very robust, nickel-plated zinc di

C6Amodul 2 port 180°M UP pure white

Product specification Modular wall outlet for the construction of a passive network infrastructure with the highest quality requirements. The junction box is suitable for connecting telephones up to 10 Gbit networks and power supply with PoE with up to 90W. The very robust, nickel-plated zinc di

C6Amodul 2 port 180°M UPk pure white

Product specification Modular wall outlet for the construction of a passive network infrastructure with the highest quality requirements. The junction box is suitable for connecting telephones up to 10 Gbit networks and power supply with PoE with up to 90W. The very robust, nickel-plated zinc di