Speaker Cable, 2 C #14 Str BC-OFHC, PVC Jkt, CM, DIR BUR, Flexible

Product Description Speaker Cable, 2 Conductor 14 AWG (105 x 34) Oxygen-Free Bare Copper (High Conductivity), PE Insulation, PVC Jacket, CM, Direct Burial, Flexible

ITO (Indium Tin Oxide) Coated PET Plastic - 100mm x 200mm

o 100mm by 200mm, 0.175mm thick o ITO layer on one side o 50 Ω per sq inch o Weight: 6.68g

Window “View Port” Plugs

文件：120.92 Kbytes Page：1 Pages

Hinged top panel for 352HL and 352HS

文件：448.71 Kbytes Page：4 Pages

Speaker Cable, 2 C #14 Str BC-OFHC, PVC Jkt, CM, DIR BUR, Flexible

Product Description Speaker Cable, 2 Conductor 14 AWG (105 x 34) Oxygen-Free Bare Copper (High Conductivity), PE Insulation, PVC Jacket, CM, Direct Burial, Flexible

Speaker Cable, 2 C #14 Str BC-OFHC, PVC Jkt, CM, DIR BUR, Flexible

Product Description Speaker Cable, 2 Conductor 14 AWG (105 x 34) Oxygen-Free Bare Copper (High Conductivity), PE Insulation, PVC Jacket, CM, Direct Burial, Flexible

Speaker Cable, 2 C #14 Str BC-OFHC, PVC Jkt, CM, DIR BUR, Flexible

Product Description Speaker Cable, 2 Conductor 14 AWG (105 x 34) Oxygen-Free Bare Copper (High Conductivity), PE Insulation, PVC Jacket, CM, Direct Burial, Flexible

Modul surface mount housing 2 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 6 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Modul surface mount housing 3 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 2 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Modul surface mount housing 6 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 8 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 12 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 4 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 4 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Keystone surface mount housing 3 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Speaker Cable, 2 C #14 Str BC-OFHC, PVC Jkt, CM, DIR BUR, Flexible

Product Description Speaker Cable, 2 Conductor 14 AWG (105 x 34) Oxygen-Free Bare Copper (High Conductivity), PE Insulation, PVC Jacket, CM, Direct Burial, Flexible

Speaker Cable, 2 C #14 Str BC-OFHC, PVC Jkt, CM, DIR BUR, Flexible

Product Description Speaker Cable, 2 Conductor 14 AWG (105 x 34) Oxygen-Free Bare Copper (High Conductivity), PE Insulation, PVC Jacket, CM, Direct Burial, Flexible

REGplus IP20 E-DAT modul coupler 180°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

E-DAT modul coupler 8(8) 90° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 90° coupler made of refined zinc die-casting • especially suita

25Gmodul

Product specification • certified by GHMT according to ISO/IEC TR-11801-9905 for 25GBASE-T in the Channel-Link with 30 m • in preparation: ISO/IEC TR-11801-9909 for 25GBASE-T in channel link over 30 m • completely downward compatible by complying with class EA according to ISO/IEC 11801-1 and D

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

C6Amodul 270° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools; strain relief directly snapped on to stuffer cap • easy to install connection

25Gmodul - Keystone

Product specification • certified by GHMT according to ISO/IEC TR-11801-9905 for 25GBASE-T in the Channel-Link with 30 m • in preparation: ISO/IEC TR-11801-9909 for 25GBASE-T in channel link over 30 m • completely downward compatible by complying with class EA according to ISO/IEC 11801-1 and D

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

C6Amodul K 180° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

UTP modul 8(8) Cat.6 black

Product specification • unshielded Cat.6 class E UTP module • suitable for 1 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT • compliance with class E according to ISO/IEC 11801, DIN EN 50173-1 • suitable for Remote Powering (PoE, PoE plus and UPoE) an

25Gmodul - Keystone

Product specification • certified by GHMT according to ISO/IEC TR-11801-9905 for 25GBASE-T in the Channel-Link with 30 m • in preparation: ISO/IEC TR-11801-9909 for 25GBASE-T in channel link over 30 m • completely downward compatible by complying with class EA according to ISO/IEC 11801-1 and D

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

C6Amodul K 180° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

UTP modul 8(8) Cat.6 black

Product specification • unshielded Cat.6 class E UTP module • suitable for 1 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT • compliance with class E according to ISO/IEC 11801, DIN EN 50173-1 • suitable for Remote Powering (PoE, PoE plus and UPoE) an

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

Extension box APZ 2 port C6Amodul Keystone

Product specification • for the connection of the termination point meter position in the APZ area of the termination point line network (DMARC), equipped with C6Amodul K 180° • suitable for mounting on support rail in counter panel of general power supply below cover in room for additional app

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

E-DAT modul REG 1 port IP20 light gray

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • compliance with class EA

REGplus IP20 E-DAT modul

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • Cat.6A component test acc

REGplus IP20 E-DAT modul coupler 180°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

Extension box APZ 1 port E-DAT modul Keystone

Product specification • for the connection of the termination point meter position in the APZ area of the termination point line network (DMARC), equipped with EDATmodul K • suitable for mounting on support rail in counter panel of general power supply below cover in room for additional applica

REGplus IP20 E-DAT modul coupler 90°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

Extension box APZ 2 port E-DAT modul keystone

Product specification • for the connection of the termination point meter position in the APZ area of the termination point line network (DMARC), equipped with EDATmodul K • suitable for mounting on support rail in counter panel of general power supply below cover in room for additional applica

Modul 19 inch module frame 1RU 24 Port light gray unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of silver anodized aluminum • plastic module support with dust protection covers (other colors available as accessory), detachable to the front • integrated cable support with opt

REGplus IP20 C6Amodul 180°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 180° RJ45 individual module • cable feed 45° from the top, plug direction 45° downwards • certified to GHMT Cat.6

Keystone 19 inch module frame 1RU 24 port light gray unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, keystone design • module frame front made of silver anodized aluminum • plastic module support with dust protection covers (other colors available as accessory), detachable to the front • integrated cable support with

C6Amodul 24 port 180°M 1RU

Product specification • 19 inch 1RU module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA up to 500 MHz

Modul 19 inch module frame 1RU 24 port black unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of black anodized aluminum • plastic module support with dust protection covers (other colors available as accessories), detachable to the front • integrated cable support with op

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

REGplus IP20 C6Amodul 270°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 270° RJ45 individual module • cable feed 45° from the bottom, plug direction 45° downwards • certified to GHMT Ca

Extension box APZ 1 port C6Amodul Keystone

Product specification • for the connection of the termination point meter position in the APZ area of the termination point line network (DMARC), equipped with C6Amodul K 180° • suitable for mounting on support rail in counter panel of general power supply below cover in room for additional app

E-DAT modul REG unequipped IP20 light gray

Product specification • unequipped termination unit for individual module in Modul design for mounting on TH35 rail to DIN EN 60715 • width of 1HP allows mounting up to 12 REG in standard electrical distribution panels • when mounted as a device of protection class I, the equipotential bonding

REGplus IP20 E-DAT modul coupler 90°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

E-DAT modul coupler 8(8) 180° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 180° coupler made of refined zinc die-casting • especially suit

E-DAT modul coupler 8(8) 90° class EA

Product specification • RJ45 cable coupler class EA • compliance with class EA to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • fully shielded 90° coupler made of refined zinc die-casting • especially suita

25Gmodul

Product specification • certified by GHMT according to ISO/IEC TR-11801-9905 for 25GBASE-T in the Channel-Link with 30 m • in preparation: ISO/IEC TR-11801-9909 for 25GBASE-T in channel link over 30 m • completely downward compatible by complying with class EA according to ISO/IEC 11801-1 and D

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

C6Amodul 270° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools; strain relief directly snapped on to stuffer cap • easy to install connection

REGplus IP20 C6Amodul 180°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 180° RJ45 individual module • cable feed 45° from the top, plug direction 45° downwards • certified to GHMT Cat.6

REGplus IP20 C6Amodul 270°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 270° RJ45 individual module • cable feed 45° from the bottom, plug direction 45° downwards • certified to GHMT Ca