WILMAR??Protective Relays - 1000 Series

Phase failure relays protect motors, equipment and personnel from damage or injury caused by open phase, reversed phase sequence, or low voltage in a three phase system. Models are available for 50 and 60 Hz with voltages up to 575 volts. Motor control switchboards are a common application. Opera

Multi-channel data acquisition

Up to 16 unipolar analog input channels Up to 12-bit resolution with 0.5 accuracy Up to 4 software configurable digital output lines Up to 1 MS/s sample rate USB connected and powered Complete with ready-to-go data logging software Includes API and examples for C/C++/C#, VB, LabVIEW VIs

包装：散装 描述：BATT HOLDER AA 2 CELL SMD 电池产品 电池座，电池夹，电池触头

功能：收发器 包装：散装 描述：USB WIFI (802.11B/G/N) MODULE: F RF/IF，射频/中频和 RFID 射频接收器、发射器、收发器成品

Inductive Sensor

Features ■Rectangular, height 40 mm ■Variable orientation of active face in 9 directions ■Plastic, PBT-GF30-VO ■High-luminance corner LEDs ■Optimum view of operating voltage and switching state from any position ■Thread, 1/2-14 NPT ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-

TOPMARK NEO - Laser marker

Laser marking system for the efficient marking of metal or plastic marking material from the LS…, UCT…, UC…/PP…, UM… product families.

TOPMARK NEO SET - Laser marker set

Device set consisting of the TOPMARK NEO laser marking system and the TMN-EXTRACTION extraction unit for the efficient marking of metal or plastic marking material from the LS…, UCT…, UC…/PP…, UM… product families

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

TMN-BP - Bypass module

Bypass plug, D-SUB plug, 25-pos. for simulating an extraction unit

Inductive Sensor

Features ■Rectangular, height 40 mm ■Variable orientation of active face in 9 directions ■Plastic, PBT-GF30-VO ■High-luminance corner LEDs ■Optimum view of operating voltage and switching state from any position ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 m

AT9018

Description 140mm Downlight Extension Plate - White

AT9012 TRI

Description 11W LED Downlight with Dimmable Driver - 90 degree beam - White - TRI - SER II

AT9012 FR

Description 12W LED Fire rated Downlight w/Dimm Driver - 120o beam - Warm White - IP65

AT9012 TRI

Description 11W LED Downlight with Dimmable Driver - 90 degree beam - Anodised - TRI - SER II

AT9027 TRI

Description 10W Flush Lens low profile LED downlight with dimmable driver - Tri-CCT - White

AT9034 TRI

Description 8W LED Downlight w/Dimm Driver - 110Deg beam - White - TRI-CCT

AT9012 COB

Description 12W Fixed COB LED Downlight - White/Cool White

AT9012 COB

Description 12W Fixed COB LED Downlight - White/Warm White

Maximus

Description 8W Low-Glare LED Downlight - 90mm - TRI-CCT - White

Inductive Sensor

Features ■Rectangular, height 40 mm ■Variable orientation of active face in 9 directions ■Plastic, PBT-GF30-VO ■High-luminance corner LEDs ■Optimum view of operating voltage and switching state from any position ■Thread, 1/2-14 NPT ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-

TMN-PRE FILTER - Cleaning set

Prefilter for TOPMARK NEO, for replacement

EPIC® H-B 24 TG

Description  Ideal for many applications due to a wide range of housings and inserts

TMN-EXTRACTION - Cleaning set

Filter and extraction unit for the efficient extraction of fumes and dust caused by TOPMARK NEO laser emissions

TMN-TRANSPORT BOX - Original packaging

Original packaging for transportation

TMN-ADAPTER PLATE-LS - Adapter plate

Adapter plate for LS materials incl. 4 magnets for spot securing of lightweight marking materials

TMN-HANDLE SET - Set

Carrying handles for carrying the laser marker more easily

EPIC® H-B 24 TG-RO

Description  Ideal for many applications due to a wide range of housings and inserts

Inductive Sensor

Features ■Rectangular, height 40 mm ■Variable orientation of active face in 9 directions ■Plastic, PBT-GF30-VO ■High-luminance corner LEDs ■Optimum view of operating voltage and switching state from any position ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 m

SF-Z0048 - Crimp insert

Positioning pins 5 and 6 for the SF-Z0054 crimping tool, for crimping turned SF contacts, diameter: 0.6 mm. Product description Positioning pins for SF-Z0054 crimping tool

Loop-powered dual-channel temperature transmitter

Description The device is a temperature transmitter with two input channels and HART® communication for conversion of different input signals in a scalable analog 4 mA ... 20 mA output signal. The device contains two measuring inputs for – Resistance thermometers (RTD) – Thermocouples (TC)

Loop-powered dual-channel temperature transmitter

Description The device is a temperature transmitter with two input channels and HART® communication for conversion of different input signals in a scalable analog 4 mA ... 20 mA output signal. The device contains two measuring inputs for – Resistance thermometers (RTD) – Thermocouples (TC)

Triple 4-3-3-Input Bus Driver

DESCRIPTION The 10123 consists of three NOR Gates for use as Drivers. FEATURES • Typical propagation delay: 3.0ns • Typical supply current (-IEE): 71mA

Triple 4-3-3-Input Bus Driver

DESCRIPTION The 10123 consists of three NOR Gates for use as Drivers. FEATURES • Typical propagation delay: 3.0ns • Typical supply current (-IEE): 71mA

Triple 4-3-3-Input Bus Driver

DESCRIPTION The 10123 consists of three NOR Gates for use as Drivers. FEATURES • Typical propagation delay: 3.0ns • Typical supply current (-IEE): 71mA

Avago Aveon20mm range

[carclo-optics] Avago 20 & 26.5mm Range Avago Aveon 20 & 26.5mmRange Avago Jade 20 & 26.5mmRange Avago Moonstone 20 & 26.5mmRange

SMALL CHAINS AND FITTINGS

PNEUFIT 10 series Push-in fittings

> Port size: Ø 4 ... 16 mm O/D tube, ISO G, ISO R, ISO Rc and NPT threads > Very compact units > Easy tube insertion for rapid assembly of pneumatic circuits > Positive tube anchorage > All BSP taper threads pre-coated with non- PTFE based sealant > Straight adaptors feature internal

AT9019

Description 170mm Downlight Extension Plate - Silver

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded

• Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available

VAL-US-1U-48/65/11V-FM - Lightning/surge arrester

UL Listed Type 1 SPD, varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor (positive pole), without risk assessment for Lightning Protection Levels III and IV, with remote indication contact

VAL-US-1U-48/65/20-FM - Lightning/surge arrester type 1/2

UL Listed Type 1 SPD, varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor (positive pole), without risk assessment for Lightning Protection Levels III and IV, with remote indication contact.

VAL-US-2U-48/65/10-FM - Type 1 surge protection device

Surge protective device, configured for 2U rack-mount applications, single channel with remote indication contact for 48 V DC.

EPIC® H-B 24 TBF

Description  Ideal for many applications due to a wide range of housings and inserts

COMPACT PHOTOELECTRIC SENSORS

Features Sensor/ detection principle Photoelectric retro-reflective sensor Dimensions (W x H x D) 45 mm x 73.7 mm x 48.6 mm Housing design (light emission) Rectangular Sensing range max. 0 m ... 15 m 1) Sensing range 0 m ... 15 m 1) Type of light Visible red light Light source LED 2) Light

COMPACT PHOTOELECTRIC SENSORS

Features Sensor/ detection principle Photoelectric retro-reflective sensor Dimensions (W x H x D) 45 mm x 73.7 mm x 48.6 mm Housing design (light emission) Rectangular Sensing range max. 0 m ... 15 m 1) Sensing range 0 m ... 15 m 1) Type of light Visible red light Light source LED 2) Light

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

Minitek® Pwr 3.0 Connector System Dual Row & Single Row

FEATURES § Low insertion force for installation of crimped terminal § Fully isolated terminals § Positive locking on housing with low thumb latch operation § Fully polarized housings § Scoop-proof housings § High retention force in housing § Glow wire compliant option § BMI option § UL94V

EPIC® H-B 24 TBF-LB

Description  Ideal for many applications due to a wide range of housings and inserts