Nylon PCB Supports - Imperial Spacing

文件：111.86 Kbytes Page：1 Pages

Low Power Single Supply Hex PECL-to-TTL Translator

General Description The 100390 is a hex translator for converting F100K logic levels to TTL logic levels. Unlike other level translators, the 100390 operates using only one +5V supply. Differential inputs allow each circuit to be used as an inverting, noninverting, or differential receiver. An in

Low Power Single Supply Hex PECL-to-TTL Translator

General Description The 100390 is a hex translator for converting F100K logic levels to TTL logic levels. Unlike other level translators, the 100390 operates using only one +5V supply. Differential inputs allow each circuit to be used as an inverting, noninverting, or differential receiver. An in

Low Power Single Supply Hex PECL-to-TTL Translator

General Description The 100390 is a hex translator for converting F100K logic levels to TTL logic levels. Unlike other level translators, the 100390 operates using only one +5V supply. Differential inputs allow each circuit to be used as an inverting, noninverting, or differential receiver. An in

Low Power Single Supply Hex PECL-to-TTL Translator

General Description The 100390 is a hex translator for converting F100K logic levels to TTL logic levels. Unlike other level translators, the 100390 operates using only one +5V supply. Differential inputs allow each circuit to be used as an inverting, noninverting, or differential receiver. An in

Low Power Single Supply Hex PECL-to-TTL Translator

General Description The 100390 is a hex translator for converting F100K logic levels to TTL logic levels. Unlike other level translators, the 100390 operates using only one +5V supply. Differential inputs allow each circuit to be used as an inverting, noninverting, or differential receiver. An in

Low Power Single Supply Hex TTL-to-PECL Translator

General Description The 100391 is a hex translator for converting TTL logic levels to F100K PECL logic levels. The unique feature of this translator, is the ability to do this translation using only one +5V supply. The differential outputs allow each circuit to be used as an inverting/non-inverti

Low Power Single Supply Hex TTL-to-PECL Translator

General Description The 100391 is a hex translator for converting TTL logic levels to F100K PECL logic levels. The unique feature of this translator, is the ability to do this translation using only one +5V supply. The differential outputs allow each circuit to be used as an inverting/non-inverti

Low Power Single Supply Hex TTL-to-PECL Translator

General Description The 100391 is a hex translator for converting TTL logic levels to F100K PECL logic levels. The unique feature of this translator, is the ability to do this translation using only one +5V supply. The differential outputs allow each circuit to be used as an inverting/non-inverti

Low Power Single Supply Hex TTL-to-PECL Translator

General Description The 100391 is a hex translator for converting TTL logic levels to F100K PECL logic levels. The unique feature of this translator, is the ability to do this translation using only one +5V supply. The differential outputs allow each circuit to be used as an inverting/non-inverti

Low Power Single Supply Hex TTL-to-PECL Translator

General Description The 100391 is a hex translator for converting TTL logic levels to F100K PECL logic levels. The unique feature of this translator, is the ability to do this translation using only one +5V supply. The differential outputs allow each circuit to be used as an inverting/non-inverti

Low Power 9-Bit ECL-to-TTL Translator with Latches

General Description The 100393 is a 9-bit translator for converting F100K logic levels to TTL logic levels. A LOW on the latch enable (LE) latches the data at the input state. A HIGH on the LE makes the latches transparent. A HIGH on either the ECL or TTL output enable (OE ECL or OE TTL), holds t

Low Power 9-Bit ECL-to-TTL Translator with Latches

General Description The 100393 is a 9-bit translator for converting F100K logic levels to TTL logic levels. A LOW on the latch enable (LE) latches the data at the input state. A HIGH on the LE makes the latches transparent. A HIGH on either the ECL or TTL output enable (OE ECL or OE TTL), holds t

Low Power 9-Bit ECL-to-TTL Translator with Registers

General Description The 100395 is a 9-bit translator for converting F100K logic levels to TTL logic levels. A HIGH on the output enable (OE) holds the TTL outputs in a high impedance state. Two separate clock inputs are available for multiplexing and system level testing. The 100395 is designed

Low Power 9-Bit ECL-to-TTL Translator with Registers

General Description The 100395 is a 9-bit translator for converting F100K logic levels to TTL logic levels. A HIGH on the output enable (OE) holds the TTL outputs in a high impedance state. Two separate clock inputs are available for multiplexing and system level testing. The 100395 is designed

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100397 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. The

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100397 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. The

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100397 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. The

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100397 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. The

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100398 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. Th

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100398 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. Th

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100398 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. Th

Quad Differential ECL/TTL Translating Transceiver with Latch

General Description The 100398 is a quad latched transceiver designed to convert TTL logic levels to differential F100K ECL logic levels and vice versa. This device was designed with the capability of driving a differential 25Ω ECL load with cutoff capability, and will sink a 64 mA TTL load. Th

包装：盒 描述：PCB TERMINAL 连接器，互连器件 线对板

Low Power Single Supply Hex PECL-to-TTL Translator

包装：散装 描述：OMNIMATE POWER - SERIES WGK, FEE 连接器，互连器件 面板安装

Low Power Single Supply Hex TTL-to-PECL Translator

Single Supply Hex TTL-to-ECL Translator

DIP 14 SERIES REED RELAYS

[SRC DEVICES] DESCRIPTION SRC Device’s epoxy molded DIP 14 Series offers a variety of contacts and schematics to meet the needs of a wide range of applications. It features the MVS2/MVS7 models designed for high reliability. The MSS2/7 DIPs are 1-Form-A relays equipped with the MYAD® all-p

DIP 14 SERIES REED RELAYS

DESCRIPTION CP Clare’s epoxy molded DIP 14 Series offers a variety of contacts and schematics to meet the needs of a wide range of applications. It features the MVS2/MVS7 models designed for high reliability. The MSS2/7 DIPs are 1 form A relays equipped with the MYAD® all-position mounting swit

Optical Components for Optical Measurement

文件：1.85753 Mbytes Page：28 Pages

915 MHz Stamped Metal Embedded Antenna

文件：65.48 Kbytes Page：2 Pages